Automatic switch-off of the pump switch after the program ends

[metamorph81]

Hi guys,
is it possible to configure the pump switch to automatically turn off when the program is finished? Unfortunately, I couldn't find anything about this.
Thanks, Olaf

[petergridge]

Hi Olaf,

The pump should turn off automatically 5 seconds after the valve/switch has turned off, this allows time for another zone to start without cycling the pump. The pump will also turn off during an eco/wait period. The pump monitors the zones switches that have the pump assigned and turns on/off as required.

Pete

[romankysely]

Hi @petergridge , My setup first switch ON Zone 1 and then after 0,5-1s switch ON Pump . Is it possible to postpone switch Zone 1 after Pump? On the finish on last Zone it is working fine. Last Zone is OFF a then after 4s is Pump OFF too. I suppose that correct queue is: Pump is going first one and finish last one. Or am I wrong?
thx fox reply

[petergridge]

The pump model works on monitoring the zones that require a pump and starting the pump once a zone has started that requires the pump. I could tweak it to be a little more timely but I believe there will always be a little lag.

[romankysely]

Thx Peter for explanation.
I'm a little worried about how the 1st zone valve will react when it gets an impulse to open, but at the same time it won't have water pressure because the pump valve will still be closed. That's exactly the problem, but maybe I'm worrying unnecessarily. But I read somewhere that the valves need a certain min. pressure to open. Your answer was still useful to me, because now I know that this is a feature and not a defect of my settings. Thank you.

[metamorph81]

Hi Pete,Thanks for your quick answer.I will check this later again, because it doesn’t work yesterday after the installation and configuration of the integration.All the bestOlaf Send by EifonOlaf VorbergDorfstraße 16a 39326 Samswegen OT Bleichemobil: + 49 176 52348889On 15. Apr 2025, at 11:33, Peter ***@***.***> wrote: Hi Olaf, The pump should turn off automatically 5 seconds after the valve/switch has turned off, this allows time for another zone to start without cycling the pump. The pump will also turn off during an eco/wait period. The pump monitors the zones switches that have the pump assigned and turns on/off as required. Pete —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[petergridge]

When the next version is released the pump and zone will start simultaneously,

[romankysely]

Great, thanks a lot Peter!