host.auth seems not working

[grigoroffbenj]

When I put on "host.auth" file:

GRIG:grig:grig

and in "sourcetable.dat" file:

STR;NEAR;NEAR;RTCM3;1004,1005,1006,1008,1012,1019,1020,1033,1042,1045,1046,1077,1087,1097,1107,1127,1230;;GPS+GLO+GAL+BDS+QZS;NONE;NONE;48.000;2.000;1;0;PB-Virtual,0;NONE;N;N;;
# List of local STR corresponding to sources in sources.auth
STR;GRIG;Fontenay-Tresigny;RTCM3;1006,1033,1077,1087,1097,1107,1117,1127,1137;2;GLO+GAL+SBS+QZS+BDS+GPS;NONE;FRA;48.704;2.882;0;0;SEPT ASTERX4 4.10.0;none;N;N;15200;

no changes "caster.yml" file:

# Credentials to connect to remote hosts, especially for the proxy mode.
#
host_auth_file: /usr/local/etc/millipede/host.auth

#
# Blocklist file path (optional)
#
blocklist_file: blocklist

#
# Source credentials for local sources and their STR lines
#
source_auth_file: /usr/local/etc/millipede/source.auth
sourcetable_file: /usr/local/etc/millipede/sourcetable.dat

the ntrip client still can obtain RTCM corrections.

I know millipede is developed for Centipede and the streams are free, but this authentication feature is useful for test Mountpoints.

[pbeyssac]

host.auth is used for the caster to connect to outside hosts.
You're right that there is no provision currently for mountpoint access credentials.
Adding a new file would probably be needed. I'll think of that for a future feature.