Welcome to go-snmp-olt-zte-c320 Discussions!

[sumitroajiprabowo]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[cherlow]

Do you have more OIDs for instance for onu uptime and onu distance. Is there a resource where they are documented?

[sumitroajiprabowo]

You can search for it using snmp trap or using the mib browser application to search for the oid value you want..

[cherlow]

I did use MIB Browser for most of the stuff I got. A few of them OID's don't seem to be documented anywhere. For the titan series I realised that OID's occuring at .1.3.6.1.4.1.3902.1082.500.10. and .1.3.6.1.4.1.3902.1082.500.20. even in oid info sites such as http://oid-info.com don't exist. Do you have the MIB's ? They would be of good help. Thankyou

[sumitroajiprabowo]

You can check this

[cherlow]

Thank you. I got this information from ZTE OLT Titan series and Huawei OLT SmartAX.

[sumitroajiprabowo]

are you using olt zte c3xx?

[cherlow]

No. zte olt c6xx but seems to be somehow compatible with c3xx from the OIDs you had.

[sumitroajiprabowo]

in the documentation that I read, I just saw that there is an ois to show last downtime, last uptime, last down cause and distance as you sent in the image. can you show the OID? Is it compatible with the C3xx OLT that I use? Thanks

[MuhammadAlfiFauzul]

Thank you. I got this information from ZTE OLT Titan series and Huawei OLT SmartAX.

sir what oid tx power and rx power?

[cherlow]

I don't have a zte olt c3xx but you can try

• {name: gpon.ont.LastOnlineTime, oid: .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.5}

• {name: gpon.ont.LastOfflineTime, oid: .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.6}

• {name: gpon.ont.LastOfflineReason, oid: .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.7, values: { 1: unknown, 2: LOS, 3: LOSi, 4: LOFi, 5: sfi, 6: loai, 7: loami, 8: AuthFail, 9: PowerOff, 10: deactiveSucc, 11: deactiveFail, 12: Reboot, 13: Shutdown }}

• {name: gpon.optical.distance, oid: .1.3.6.1.4.1.3902.1082.500.10.2.3.10.1.2}

The lastoffline and lastonline time are octet strings that can be converted to datetime

[sumitroajiprabowo]

thanks its work for OLT ZTE c3xx

gpon ont last online time

gpon ont last offline time

gpon ont Last offline reason

gpon optical distance

Thanks

[Dieg0CLima]

Hello, I am working in a monitoring platform and i am searching for oid bandwidth information to extract from the OLT ZTE (bytes and packets),

[Dieg0CLima]

Thats Ok, Thanks for reply.

I found some doc about this, now i am working to implement performance improvements

work pretty well but i want to do using SNMP Traps, i am have some issues to find MIBs and Doc about it, I would be very grateful if you have any information about.

This print is from the system i am building, i am creating one ERP to consolidate in one place NMS, MAP, Billing, Contract, etc.

[sumitroajiprabowo]

Wow. in your picture shows the bandwidth usage?
i think you are using snmp trap..
would you like to share oid for display bandwidth usage?

[sumitroajiprabowo]

i see in the picture you sent there are some buttons like add onu, and delete onu.

are you using snmp write to do that?

[Dieg0CLima]

The actions on this screen are automated using templates, basically telnet commands.

SNMP trap that I will use to obtain the event when my ONU has signal loss, I will receive this event from the OLT via SNMP Trap and record it in my relational database and inform my neutral network partners or register a maintenance service order, in these screens I create a JavaScript function that makes a request to my server (every 5 seconds, i make like this because it is simples, later i will change for Websockets ) that will use SNMP to obtain bandwidth usage, for example. The SNMP Trap in my case is for the source of the data to be issued from the OLT and not my server requesting SNMP data

The oids i am using:

zxAnPonOnuIfRxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.3
zxAnPonOnuIfTxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.46

[Dieg0CLima]

My difficulty with SNMP Trap is that I receive it from the OLT, but I don't have the MIBs to translate the information, I searched on ZTE and Zabbix blogs and had no success. Can you help me with this?

[suciptonetwork]

cara mengkoneksikan snmp dari olt ke snmp go bagaimana om

[sumitroajiprabowo]

bisa cek disini om README.md
selamat mencoba omku. 👨‍💻👩‍💻

[dimmascool]

Anyone have oid's for getting tx-power?

[Dieg0CLima]

.1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.44 (TX Octects)

.1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.45 (TX Packets)

.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.14 (TX Power)

[dimmascool]

why the value between snmp and telnet is different, any idea ?

[Dieg0CLima]

Thats OIDs is for C320, try these instead:

.1.3.6.1.4.1.3902.1082.30.40.2.4.1.3

[dimmascool]

Does anyone know how to get the OID index, such as "gpon-olt_1/1/1," from an unconfigured ONT, like in the image?

[sumitroajiprabowo]

do you mean like this?

[dimmascool]

Yup, btw i solved my problem by reading oids in your code "Monitoring OLT ZTE C320 with SNMP", thx a lot bro. Sorry my English is bad kwwkkw

[dimmascool]

Oh iya, untuk melihat onu yang belum ter registrasi apakah sudah ada di project anda bang ? saya lihat belum ada oid yang menunjukan data onu ter registrasi

[sumitroajiprabowo]

Kalo untuk unauthenticate onu saya pake interactive ssh bang.
Untuk projectnya udah ada masih tahap development

[infiplusonesolo]

does anyone know what is the zte SNMP OID to get mac addresses, like when using command

show mac

on ssh

here are some output example, using the ssh command

80f7.a6ef.17ad 219 Dynamic gpon-onu_1/2/1:2 vport 1
80f7.a6ef.1831 219 Dynamic gpon-onu_1/2/1:3 vport 1
80f7.a6f7.c1c9 219 Dynamic gpon-onu_1/2/1:4 vport 1
80f7.a6ef.1765 219 Dynamic gpon-onu_1/2/1:5 vport 1

[sumitroajiprabowo]

Get mac address per pon? 🤔

[achyar10]

Hallo, kalau untuk register apa sudah ada?

[sumitroajiprabowo]

register gimana kak?

[achyar10]

untuk aktivasi, authenticate ontnya..

[seisoci]

ada info untuk oid C320 V2.1 RX & TX Power yang yml tidak terbaca