Ethernet port is 100Mbps instead of 1Gbps on trixie

[sharicov]

Device Information | 设备信息

• SOC: S095x3
• Model X96 Max Plus2

**Armbian Version |

• Kernel Version: 6.1.152-ophub
• Release: Trixie

Describe the bug | 问题描述
Ethernet port shows as 100Mbps, worked as 1Gbps on Bookworkn on the same box after installing to emmc. On trixie installed it on emmc as well but port shows 100Mbos
Please provide a detailed description of the issue and, if necessary, attach a screenshot.
详细描述问题，并在必要时附上屏幕截图。

ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
Supports Wake-on: ug
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes

cat /proc/device-tree/model
AMedia X96 Max+ (eth0 speed:100Mb/s)

armbian:~:# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mmcblk2 179:0 0 58.2G 0 disk
├─mmcblk2p1 179:1 0 511M 0 part /boot
└─mmcblk2p2 179:2 0 57.6G 0 part /var/log.hdd
/
mmcblk2boot0 179:32 0 4M 1 disk
mmcblk2boot1 179:64 0 4M 1 disk
zram0 254:0 0 1.8G 0 disk [SWAP]
zram1 254:1 0 50M 0 disk
zram2 254:2 0 0B 0 disk

Also MAC adress of the ethernet appears to be different that what it was on bookworm.

[ophub]

You are using the default dtb for the S905X3 firmware, which is a 100M (Fast Ethernet) version designed to make USB booting easier.
When you install the system to eMMC, simply select the appropriate device in the installation options, and it will automatically update to the correct Gigabit version dtb.
If you continue to use the system from USB, please manually correct the dtb name in /boot/uEnv.txt.

You can check the corresponding dtb for your device in the device list here:
https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/build-armbian/armbian-files/common-files/etc/model_database.conf

[sharicov]

Thanks for quick response, I've choosen 502 option, which is X96-MAX+_1GB, is this correct? My device is X96 Max+ 4GB RAM and 1Gbps.
cat /proc/meminfo shows MemTotal: 3747656 kB

BTW name of the option should be X96-MAX+_1Gb, not X96-MAX+_1GB (there is typo B insted of b in gigabits).

[sharicov]

Just ran batocera for the check, runs with 1Gbps

[ophub]

1 Gb refers to the network card speed, not the memory capacity.

[sharicov]

Yes, my problem is trixie installs with 100Mb on eMMC unlike Bookworm that was booting from MicroSD as 100Mb, but after installed to eMMC became 1Gb in Trixie case both MicroSD and eMMC are 100Mb

[sharicov]

Thanks for clarifications, I did choose 502 option, which is X96-MAX+_1GB on install, and after installed and booted from eMMC still getting 100Mb

[ophub]

edit /boot/uEnv.txt

[sharicov]

Didn't help, the only thing worked so far is installing your old build Armbian_22.02.0_Aml_s905x3_bullseye_5.10.96_2022.02.04.1252.img.gz and using meson-sm1-x96-max-plus.dtb
4GB RAM recognized and 1Gbps is working
How do I upgrade from it to trixie
Will this way work?

armbian-sync
armbian-fix

sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get dist-upgrade -y

after apt upgrade system sopped booting and deleted meson-sm1-x96-max-plus.dtb
copied it back, but still stuck in boot logo.
not installing to emmc because don't want to mess with the box until I am able to boot trixie from the microsd card