gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match

Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.

However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().

gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
			       struct dwapb_port_property *pp,
			       unsigned int offs);
port->gc.fwnode = pp->fwnode;

693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);

When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.

Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.

Fixes: 5062e4c ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1 ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Author: Devyn Liu

drivers/gpio/gpiolib-acpi.c

@@ -128,7 +128,24 @@ static bool acpi_gpio_deferred_req_irqs_done;
 
 static int acpi_gpiochip_find(struct gpio_chip *gc, const void *data)
 {
-	return device_match_acpi_handle(&gc->gpiodev->dev, data);
+	/* First check the actual GPIO device */
+	if (device_match_acpi_handle(&gc->gpiodev->dev, data))
+		return true;
+
+	/*
+	 * When the ACPI device is artificially split to the banks of GPIOs,
+	 * where each of them is represented by a separate GPIO device,
+	 * the firmware node of the physical device may not be shared among
+	 * the banks as they may require different values for the same property,
+	 * e.g., number of GPIOs in a certain bank. In such case the ACPI handle
+	 * of a GPIO device is NULL and can not be used. Hence we have to check
+	 * the parent device to be sure that there is no match before bailing
+	 * out.
+	 */
+	if (gc->parent)
+		return device_match_acpi_handle(gc->parent, data);
+
+	return false;
 }
 
 /**