Replies: 13 comments 6 replies
-
|
Revert to last Backup? I just have a cronjob in the background that does an DB-Backup every 15 min on the workdays… |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I am not so savvy at the development environment
But I am finding source to help me out
I cN see the old network environment folder on my server
I need to find a way the restore it or install the new nebox I just pushed
…On Fri, Jun 2, 2023, 4:44 PM martinum4 ***@***.***> wrote:
Revert to last Backup? I just have a cronjob in the background that does
an DB-Backup every 15 min on the workdays…
Maybe enable debug, check all your logs, restart the daemon
—
Reply to this email directly, view it on GitHub
<#12804 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PQPCQDZ5CCWFWWQ3S3XJJGDRANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Did you follow the upgrade guide at https://docs.netbox.dev/en/stable/installation/upgrading/ ? Or just run the upgrade.sh without any of the steps? Helping gets kinda difficult when you don't know what has and hasn't been done… |
Beta Was this translation helpful? Give feedback.
-
|
Yes I saw the script and ran it
But it was clearly stated to back up and follow the steps
I was getting errors because was not running the right Python and also not
in the right directory
…On Fri, Jun 2, 2023, 5:01 PM martinum4 ***@***.***> wrote:
Did you follow the upgrade guide at
https://docs.netbox.dev/en/stable/installation/upgrading/ ? Or just run
the upgrade.sh without any of the steps? Helping gets kinda difficult when
you don't know what has and hasn't been done…
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PSISYFSA6KDBY3ADMLXJJIC3ANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Show the output from: |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
● netbox.service - NetBox WSGI Service
Loaded: loaded (/etc/systemd/system/netbox.service; enabled; vendor
preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Sat
2023-06-03 06:17:52 >
Docs: https://netbox.readthedocs.io/en/stable/
Process: 273809 ExecStart=/opt/netbox/venv/bin/gunicorn --pid
/var/tmp/netbox.pid --p>
Main PID: 273809 (code=exited, status=203/EXEC)
journalctl -n100 --no-pager -u netbox
[root@]# journalctl -n100 --no-pager -u netbox
-- Logs begin at Fri 2023-06-02 11:26:04 CDT, end at Sat 2023-06-03
06:20:05 CDT. --
Jun 03 06:11:49 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:11:49 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:11:49 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:11:49 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:12:19 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:12:19 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2234.
Jun 03 06:12:19 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:12:19 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:12:19 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:12:19 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:12:50 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:12:50 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2235.
Jun 03 06:12:50 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:12:50 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:12:50 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:12:50 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:13:20 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:13:20 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2236.
Jun 03 06:13:20 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:13:20 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:13:20 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:13:20 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:13:50 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:13:50 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2237.
Jun 03 06:13:50 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:13:50 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:13:50 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:13:50 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:14:20 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:14:20 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2238.
Jun 03 06:14:20 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:14:20 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:14:20 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:14:20 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:14:51 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:14:51 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2239.
Jun 03 06:14:51 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:14:51 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:14:51 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:14:51 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:15:21 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:15:21 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2240.
Jun 03 06:15:21 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:15:21 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:15:21 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:15:21 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:15:51 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:15:51 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2241.
Jun 03 06:15:51 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:15:51 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:15:51 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:15:51 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:16:21 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:16:21 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2242.
Jun 03 06:16:21 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:16:21 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:16:21 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:16:21 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:16:52 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:16:52 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2243.
Jun 03 06:16:52 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:16:52 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:16:52 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:16:52 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:17:22 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:17:22 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2244.
Jun 03 06:17:22 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:17:22 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:17:22 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:17:22 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:17:52 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:17:52 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2245.
Jun 03 06:17:52 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:17:52 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:17:52 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:17:52 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:18:22 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:18:22 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2246.
Jun 03 06:18:22 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:18:22 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:18:22 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:18:22 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:18:53 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:18:53 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2247.
Jun 03 06:18:53 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:18:53 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:18:53 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:18:53 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:19:23 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:19:23 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2248.
Jun 03 06:19:23 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:19:23 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:19:23 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:19:23 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
Jun 03 06:19:53 NBserver systemd[1]: netbox.service: Service RestartSec=30s
expired, scheduling restart.
Jun 03 06:19:53 NBserver systemd[1]: netbox.service: Scheduled restart job,
restart counter is at 2249.
Jun 03 06:19:53 NBserver systemd[1]: Stopped NetBox WSGI Service.
Jun 03 06:19:53 NBserver systemd[1]: Started NetBox WSGI Service.
Jun 03 06:19:53 NBserver systemd[1]: netbox.service: Main process exited,
code=exited, status=203/EXEC
Jun 03 06:19:53 NBserver systemd[1]: netbox.service: Failed with result
'exit-code'.
…On Sat, Jun 3, 2023 at 3:42 AM Brian Candler ***@***.***> wrote:
Show the output from:
systemctl status netbox
journalctl -n100 --no-pager -u netbox
—
Reply to this email directly, view it on GitHub
<#12804 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PX35532GCONZ4UBELLXJLTGPANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Error 203 from systemd means: "The actual process execution failed (specifically, the Check in Now try running it by hand: You should see the error. It could be a permissions error - e.g. the gunicorn script is not executable - or you might have missed one of several installation steps. Another possible problem is that you've upgraded the underlying OS and now the python version is different. If so, you'll need to rebuild the netbox virtualenv by re-running |
Beta Was this translation helpful? Give feedback.
-
|
Perfect!
As soon as I get to the box I will try those.
The dev team is looking at it but I am a networking guy and wanted to
expand my skill not knowing it break easily specially in production.
I owe that repair to my team.
Tha m you
…On Sat, Jun 3, 2023, 12:34 PM Brian Candler ***@***.***> wrote:
Error 203 from systemd means
<https://www.freedesktop.org/software/systemd/man/systemd.exec.html>: *"The
actual process execution failed (specifically, the execve(2) system call).
Most likely this is caused by a missing or non-accessible executable file."*
Check in /etc/systemd/system/netbox.service to see what you have in the
"User" and "ExecStart" lines:
User=netbox
...
ExecStart=/opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
Now try running it by hand:
cd /var/tmp
sudo -u netbox /opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
You should see the error. It could be a permissions error - e.g. the
gunicorn script is not executable - or you might have missed one of several
installation steps.
Another possible problem is that you've upgraded the underlying OS and now
the python version is different. If so, you'll need to rebuild the netbox
virtualenv by re-running /opt/netbox/upgrade.sh
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PTTJQY44ND3EFY3EN3XJNRS3ANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
when i try running the upgrade I get this error
File "<frozen importlib._bootstrap>", line 955, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 665, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 219, in
_call_with_frames_removed
File "/opt/netbox-3.0.10/netbox/netbox/settings.py", line 31, in <module>
f"NetBox requires Python 3.7 or higher (current: Python
{platform.python_version()})"
RuntimeError: NetBox requires Python 3.7 or higher (current: Python 3.6.8)
however the server has the python in the opt
I am at lost I am sure if the correct python is available in my user
directory I can upgrade it
…On Sat, Jun 3, 2023 at 12:34 PM Brian Candler ***@***.***> wrote:
Error 203 from systemd means
<https://www.freedesktop.org/software/systemd/man/systemd.exec.html>: *"The
actual process execution failed (specifically, the execve(2) system call).
Most likely this is caused by a missing or non-accessible executable file."*
Check in /etc/systemd/system/netbox.service to see what you have in the
"User" and "ExecStart" lines:
User=netbox
...
ExecStart=/opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
Now try running it by hand:
cd /var/tmp
sudo -u netbox /opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
You should see the error. It could be a permissions error - e.g. the
gunicorn script is not executable - or you might have missed one of several
installation steps.
Another possible problem is that you've upgraded the underlying OS and now
the python version is different. If so, you'll need to rebuild the netbox
virtualenv by re-running /opt/netbox/upgrade.sh
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PTTJQY44ND3EFY3EN3XJNRS3ANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
I think that error message is pretty clear!! Try running If you believe you have a newer version, then it must be runnable using a different command. Suppose to tell the upgrade script to use that different version. |
Beta Was this translation helpful? Give feedback.
-
|
systemctl status netbox
● netbox.service - NetBox WSGI Service
Loaded: loaded (/etc/systemd/system/netbox.service; enabled; vendor
preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Sat
2023-06-03 20:38:54 CDT; 15s ago
Docs: https://netbox.readthedocs.io/en/stable/
Process: 433439 ExecStart=/opt/netbox/venv/bin/gunicorn --pid
/var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config
/opt/netbox/gunicorn.py netbox.wsgi (code=exited, status=1/FAILURE)
Main PID: 433439 (code=exited, status=1/FAILURE)
…On Sat, Jun 3, 2023 at 9:41 PM Regis TB ***@***.***> wrote:
when i try running the upgrade I get this error
File "<frozen importlib._bootstrap>", line 955, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 665, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 219, in
_call_with_frames_removed
File "/opt/netbox-3.0.10/netbox/netbox/settings.py", line 31, in <module>
f"NetBox requires Python 3.7 or higher (current: Python
{platform.python_version()})"
RuntimeError: NetBox requires Python 3.7 or higher (current: Python 3.6.8)
however the server has the python in the opt
I am at lost I am sure if the correct python is available in my user
directory I can upgrade it
On Sat, Jun 3, 2023 at 12:34 PM Brian Candler ***@***.***>
wrote:
> Error 203 from systemd means
> <https://www.freedesktop.org/software/systemd/man/systemd.exec.html>: *"The
> actual process execution failed (specifically, the execve(2) system call).
> Most likely this is caused by a missing or non-accessible executable file."*
>
> Check in /etc/systemd/system/netbox.service to see what you have in the
> "User" and "ExecStart" lines:
>
> User=netbox
> ...
> ExecStart=/opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
>
> Now try running it by hand:
>
> cd /var/tmp
> sudo -u netbox /opt/netbox/venv/bin/gunicorn --pid /var/tmp/netbox.pid --pythonpath /opt/netbox/netbox --config /opt/netbox/gunicorn.py netbox.wsgi
>
> You should see the error. It could be a permissions error - e.g. the
> gunicorn script is not executable - or you might have missed one of several
> installation steps.
>
> Another possible problem is that you've upgraded the underlying OS and
> now the python version is different. If so, you'll need to rebuild the
> netbox virtualenv by re-running /opt/netbox/upgrade.sh
>
> —
> Reply to this email directly, view it on GitHub
> <#12804 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AIAU4PTTJQY44ND3EFY3EN3XJNRS3ANCNFSM6AAAAAAYYSBQYY>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***
> com>
>
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I will point the upgrade to that version and see what happens.
Thank you for your help
…On Sun, Jun 4, 2023, 3:30 AM Brian Candler ***@***.***> wrote:
RuntimeError: NetBox requires Python 3.7 or higher (current: Python 3.6.8)
I think that error message is pretty clear!! Try running python3 -V to
see what version of python you have installed.
If you believe you have a newer version, then it must be runnable using a
different command. Suppose python3.8 -V works, then you can do:
PYTHON=python3.8 ./upgrade.sh
to tell the upgrade script to use that different version.
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PU574HGA2T54EPSC5DXJQ2SDANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Hello and thank you for looking into this
The upgrade has been completed using the new version of Python.
However after restarting the service I am still getting the same error
message.
502 Bad Gateway
nginx/1.14.1
…On Sun, Jun 4, 2023 at 3:30 AM Brian Candler ***@***.***> wrote:
RuntimeError: NetBox requires Python 3.7 or higher (current: Python 3.6.8)
I think that error message is pretty clear!! Try running python3 -V to
see what version of python you have installed.
If you believe you have a newer version, then it must be runnable using a
different command. Suppose python3.8 -V works, then you can do:
PYTHON=python3.8 ./upgrade.sh
to tell the upgrade script to use that different version.
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PU574HGA2T54EPSC5DXJQ2SDANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
That just means Netbox isn't running. So once again, show new output from: |
Beta Was this translation helpful? Give feedback.
-
|
Hello,
I involved the dev team and we ran the upgrade with Python 3.8.12
the upgrade looking for the config file
*” (netbox.configuration) not found*
Applying database migrations (python3 netbox/manage.py migrate)...
Traceback (most recent call last):
File "/opt/netbox-3.4.7/netbox/netbox/settings.py", line 50, in <module>
configuration = importlib.import_module(config_path)
File "/opt/Python-3.8.12/Lib/importlib/__init__.py", line 127, in
import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "<frozen importlib._bootstrap>", line 1014, in _gcd_import
File "<frozen importlib._bootstrap>", line 991, in _find_and_load
File "<frozen importlib._bootstrap>", line 973, in _find_and_load_unlocked
ModuleNotFoundError: No module named 'netbox.configuration'
Please define netbox/netbox/configuration.py per the documentation
I am trying to find that file which I located
***@***.*** /]# find -name "configuration.py"
./usr/local/lib/python3.9/site-packages/pip/_internal/configuration.py
./usr/local/lib/python3.9/site-packages/pip/_internal/commands/configuration.py
./usr/local/lib/python3.8/site-packages/pip/_internal/configuration.py
./usr/local/lib/python3.8/site-packages/pip/_internal/commands/configuration.py
./opt/netbox-3.0.10/netbox/netbox/configuration.py
./opt/netbox-3.4.7/venv/lib/python3.8/site-packages/pip/_internal/configuration.py
./opt/netbox-3.4.7/venv/lib/python3.8/site-packages/pip/_internal/commands/configuration.py
I am not sure what to do at this point
…On Sun, Jun 4, 2023 at 3:30 AM Brian Candler ***@***.***> wrote:
RuntimeError: NetBox requires Python 3.7 or higher (current: Python 3.6.8)
I think that error message is pretty clear!! Try running python3 -V to
see what version of python you have installed.
If you believe you have a newer version, then it must be runnable using a
different command. Suppose python3.8 -V works, then you can do:
PYTHON=python3.8 ./upgrade.sh
to tell the upgrade script to use that different version.
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PU574HGA2T54EPSC5DXJQ2SDANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
I think you might have missed some steps from upgrade instructions. "Copy |
Beta Was this translation helpful? Give feedback.
-
|
I just reverted the server and will tey again
This time I will be careful following the steps.
Thank you
…On Mon, Jun 12, 2023, 4:02 PM Brian Candler ***@***.***> wrote:
I think you might have missed some steps from upgrade instructions
<https://docs.netbox.dev/en/stable/installation/upgrading/#option-a-download-a-release>
.
*"Copy local_requirements.txt, configuration.py, and ldap_config.py (if
present) from the current installation to the new version ... Be sure to
replicate your uploaded media as well ... Also make sure to copy or link
any custom scripts and reports that you've made ... If you followed the
original installation guide to set up gunicorn, be sure to copy its
configuration as well"*
—
Reply to this email directly, view it on GitHub
<#12804 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PXQESU3AARLQROYVDLXK5YWRANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
I gave it a try again and now after following all the steps carefully i ran
into this
File
"/opt/netbox-3.5.0/venv/lib64/python3.11/site-packages/django/db/backends/postgresql/base.py",
line 215, in get_new_connection
connection = Database.connect(**conn_params)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File
"/opt/netbox-3.5.0/venv/lib64/python3.11/site-packages/psycopg2/__init__.py",
line 122, in connect
conn = _connect(dsn, connection_factory=connection_factory, **kwasync)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
psycopg2.OperationalError: connection to server at "localhost" (::1), port
5432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
connection to server at "localhost" (127.0.0.1), port 5432 failed:
Connection refused
Is the server running on that host and accepting TCP/IP connections?
I tried to update teh postgresql.com file to allow the port but still the
same
i am not able to restart the service
…On Fri, Jun 2, 2023 at 4:44 PM martinum4 ***@***.***> wrote:
Revert to last Backup? I just have a cronjob in the background that does
an DB-Backup every 15 min on the workdays…
Maybe enable debug, check all your logs, restart the daemon
—
Reply to this email directly, view it on GitHub
<#12804 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIAU4PQPCQDZ5CCWFWWQ3S3XJJGDRANCNFSM6AAAAAAYYSBQYY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
1 reply
-
Most likely your postgres database is not running, or is running on a different host, or is firewalled off, or has been configured not to accept TCP connections. Try:
There is no "postgresql.com" file. Please say exactly what file you edited, and what change you made to it. Also show what database configuration you put in |
Beta Was this translation helpful? Give feedback.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
I had a running env with no issue and wanted to upgrade the box.
I ran the ./upgrade.sh without being cautious of all the red flag behing that action
what is the proecess to get back to where I was
I broke -- netbox 502 Bad Gateway
Beta Was this translation helpful? Give feedback.
All reactions