Adafruit nRF52840 Feather support #1424
Description
I read on the forums and from the documentation that the nRF5 series are supported to some extent. I am wondering what does it actually take to get the gateway sketch running on the device?
Right now it didn't even detect the board properly so I had to help it a bit - I changed Flash.h to load the NRF5 HAL and nRF52840 flash parameters.
But now it's just erroring out further:
In file included from /home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/architecture/NRF5/MyHwNRF5.h:51:0,
from /home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/architecture/NRF5/MyHwNRF5.cpp:23,
from /home/a/Programming/Workspace/Arduino/libraries/MySensors/MySensors.h:74,
from /tmp/arduino_modified_sketch_572985/GatewaySerial.ino:89:
/home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/architecture/NRF5/drivers/nrf5_wiring_digital.c: In function 'void nrf5_pinMode(uint32_t, uint32_t)':
/home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/architecture/NRF5/drivers/nrf5_wiring_digital.c:37:10: error: 'g_APinDescription' was not declared in this scope
ulPin = g_APinDescription[ulPin].ulPin;
^~~~~~~~~~~~~~~~~
In file included from /home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/transport/NRF5_ESB/driver/Radio.cpp:1:0,
from /home/a/Programming/Workspace/Arduino/libraries/MySensors/MySensors.h:364,
from /tmp/arduino_modified_sketch_572985/GatewaySerial.ino:89:
/home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/transport/NRF5_ESB/driver/Radio.h: At global scope:
/home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/transport/NRF5_ESB/driver/Radio.h:68:17: error: 'RADIO_MODE_MODE_Nrf_250Kbit' was not declared in this scope
NRF5_250KBPS = RADIO_MODE_MODE_Nrf_250Kbit, // Deprecated!!!
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/a/Programming/Workspace/Arduino/libraries/MySensors/hal/transport/NRF5_ESB/driver/Radio.h:68:17: note: suggested alternative: 'RADIO_MODE_MODE_Nrf_2Mbit'
NRF5_250KBPS = RADIO_MODE_MODE_Nrf_250Kbit, // Deprecated!!!
^~~~~~~~~~~~~~~~~~~~~~~~~~~
RADIO_MODE_MODE_Nrf_2Mbit
Compilation flags used by Arduino IDE:
-mcpu=cortex-m4 -mthumb -c -g -w -mfloat-abi=hard -mfpu=fpv4-sp-d16 -u _printf_float -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -DF_CPU=64000000 -DARDUINO=10813 -DARDUINO_NRF52840_FEATHER -DARDUINO_ARCH_NRF52 "-DARDUINO_BSP_VERSION=\"0.20.1\"" -DNRF52840_XXAA -DUSBCON -DUSE_TINYUSB -DUSB_VID=0x239A -DUSB_PID=0x8029 "-DUSB_MANUFACTURER=\"Adafruit LLC\"" "-DUSB_PRODUCT=\"Feather nRF52840 Express\"" -DSOFTDEVICE_PRESENT -DARDUINO_NRF52_ADAFRUIT -DNRF52_SERIES -DLFS_NAME_MAX=64 -Ofast -DCFG_DEBUG=0 -DCFG_LOGGER=1 -DCFG_SYSVIEW=0 -