RaMiX v1

[twofaktor]

RaMiX v1 has been released! 🍓🚀

The RaMiX guide is available at ~~ > ramix.minibolt.info < ~~

---

Based on MiniBolt guide

A step-by-step & updated guide to building a Bitcoin & Lightning node, and other stuff on a Raspberry Pi

Main changes to RaspiBolt v3

This guide has been adapted from RaspiBolt v3, those are the most relevant changes:

• Changed OS from Raspberry Pi OS Lite Bullseye (Debian 11 based - 64-bits) to Raspberry Pi OS Lite Bookworm (Debian 12 based - 64-bits).
• Adapted to Raspberry Pi 5, with the possibility of using internal storage: a PCIe to M.2 adapter + SSD NVMe.
• Updated all services that have been tested until now, to the latest version.
• Changed I2P, Fulcrum, and ThunderHub guides, to be part of the core guide.
• Included all UI & UX improvements of the MiniBolt guide.
• Fixed some links and wrong command issues.
• Some existing guides have been improved to clarify the flow of steps to follow.

Other notes

-> The RRSS will be the same as the MiniBolt original project. Check -> HERE
-> The common resources like the Roadmap or Networkmap have been merged and will be used together. Check -> HERE
-> The attempt to upgrade from Bullseye to Bookworm (RaspiBolt to RaMiX migration) has failed due to several difficult-to-resolve dependency conflicts, so unfortunately, there will be no dedicated migration guide and only the possibility to start from scratch ☹️

⚠️ Attention‼️-> This guide is in the WIP (work in progress) state and hasn't been completely tested yet. Many steps may be incorrect. Pay special attention to the "Status: Not tested on RaMiX" tag at the beginning of the guides. Be careful and act behind your responsibility.

For Raspberry Pi lovers!❤️🍓

---

This discussion was created from the release RaMiX v1.

[ghost]

Thanks for the initiative loving it so far.