Can someone confirm I have purchasing the right equipment

[mdeakin99]

Hi

I want am using PredBat and what to be able to control my inverter via Home Assistant to be able to do this. Can someone confirm my shopping list looks correct.

I will be moving my Home Assistant instance to be close to the Inverter so will be using the 'standard' deployment from https://kellerza.github.io/sunsynk/guide/deployment-options

1. USB to RS485 (either with long cable or not from https://www.robotics.org.za/index.php?route=product/product&product_id=5947
2. I dont need a cable splitter as the attached photo means by CAN BUS and RS485 are seperated
3. I need to do something with a network cable but I dont quite understand what yet. I think I plug the RJ45 into the RS485 port on the inverter and then depending on the cable arrangement on the RJ45 end, I snip the wire at the USB-RS485 end and use either wiring from the table.

[mdeakin99]

I went for one of these in the end and wired up the network cable myself. Still not got it working but thought I would say anyways.

https://amzn.eu/d/1IVqSyL