[Bug]: When I try to run ModelScope text2video it does nothing after pressing 'Generate'.

[rookiemann]

Is there an existing issue for this?

• I have searched the existing issues and checked the recent builds/commits of both this extension and the webui

Are you using the latest version of the extension?

• I have the modelscope text2video extension updated to the lastest version and I still have the issue.

What happened?

When I try to generate a video from text, nothing at all happens. The button is activated, yet on the console of the webui it does nothing as if nothing was pressed.

This is a fresh install of all extensions, and I had to jump through a few hoops to even get it to start up properly. First issue I had was this one - #239

Which I corrected using the fix there.

I then encountered another issue as I do have animatediff extension installed here - continue-revolution/sd-webui-animatediff#118

I fixed the issue using the fix there

Now everything starts fine, as far as the webui console gives no errors at all. Just when I press Generate:

It says it's running but on webui console:

It doesn't run at all.

Steps to reproduce the problem

1. Go to text2video
2. Press generate
3. Expect generation

What should have happened?

Text2video should have started to generate

WebUI and Deforum extension Commit IDs

webui commit id - bef51aed032c0aaa5cfd80445bc4cf0d85b408b5
txt2vid commit id - 989f5cf

Torch version

absl-py 2.1.0
accelerate 0.21.0
aenum 3.1.15
aiofiles 23.2.1
aiohttp 3.9.3
aiosignal 1.3.1
albumentations 1.4.1
altair 5.2.0
antlr4-python3-runtime 4.9.3
anyio 3.7.1
async-timeout 4.0.3
attrs 23.2.0
av 11.0.0
beautifulsoup4 4.12.3
blendmodes 2022
certifi 2024.2.2
cffi 1.16.0
chardet 5.2.0
charset-normalizer 3.3.2
clean-fid 0.1.35
click 8.1.7
clip 1.0
colorama 0.4.6
coloredlogs 15.0.1
colorlog 6.8.2
contourpy 1.2.0
cssselect2 0.7.0
cycler 0.12.1
Cython 3.0.9
decorator 4.0.11
deprecation 2.1.0
depth_anything 2024.1.22.0
easydict 1.13
einops 0.4.1
embreex 2.17.7.post4
exceptiongroup 1.2.0
facexlib 0.3.0
fake-useragent 1.5.1
fastapi 0.94.0
ffmpy 0.3.2
filelock 3.13.1
filterpy 1.4.5
flatbuffers 24.3.7
fonttools 4.50.0
frozenlist 1.4.1
fsspec 2024.3.0
ftfy 6.2.0
fvcore 0.1.5.post20221221
gdown 5.1.0
gitdb 4.0.11
GitPython 3.1.32
gradio 3.41.2
gradio_client 0.5.0
h11 0.12.0
handrefinerportable 2024.2.12.0
httpcore 0.15.0
httpx 0.24.1
huggingface-hub 0.21.4
humanfriendly 10.0
idna 3.6
imageio 2.34.0
imageio-ffmpeg 0.4.9
importlib-resources 5.12.0
inflection 0.5.1
insightface 0.7.3
iopath 0.1.9
jax 0.4.25
Jinja2 3.1.3
joblib 1.3.2
jsonmerge 1.8.0
jsonschema 4.21.1
jsonschema-specifications 2023.12.1
kiwisolver 1.4.5
kornia 0.6.7
lark 1.1.2
lazy_loader 0.3
lightning-utilities 0.10.1
llvmlite 0.42.0
lxml 5.1.0
mapbox-earcut 1.0.1
markdown-it-py 3.0.0
MarkupSafe 2.1.5
matplotlib 3.8.3
mdurl 0.1.2
mediapipe 0.10.11
ml-dtypes 0.3.2
moviepy 0.2.3.2
mpmath 1.3.0
multidict 6.0.5
mutagen 1.47.0
natsort 8.4.0
networkx 3.2.1
numba 0.59.0
numexpr 2.9.0
numpy 1.26.2
omegaconf 2.2.3
onnx 1.15.0
onnxruntime 1.17.1
open-clip-torch 2.20.0
opencv-contrib-python 4.9.0.80
opencv-python 4.9.0.80
opencv-python-headless 4.9.0.80
OpenPIV 0.25.2
opt-einsum 3.3.0
orjson 3.9.15
packaging 24.0
pandas 2.2.1
piexif 1.1.3
Pillow 9.5.0
PIMS 0.6.0
pip 24.0
portalocker 2.8.2
prettytable 3.10.0
protobuf 3.20.3
psutil 5.9.5
pycollada 0.8
pycparser 2.21
pydantic 1.10.14
pydub 0.25.1
Pygments 2.17.2
pyparsing 3.1.2
pyreadline3 3.4.1
PySocks 1.7.1
python-dateutil 2.9.0.post0
python-multipart 0.0.9
pytorch-lightning 1.9.4
pytz 2024.1
PyWavelets 1.5.0
pywin32 306
PyYAML 6.0.1
referencing 0.34.0
regex 2023.12.25
reportlab 4.1.0
requests 2.31.0
resize-right 0.0.2
rich 13.7.1
rpds-py 0.18.0
Rtree 1.2.0
safetensors 0.4.2
scikit-image 0.21.0
scikit-learn 1.4.1.post1
scipy 1.12.0
semantic-version 2.10.0
Send2Trash 1.8.2
sentencepiece 0.2.0
setuptools 63.2.0
shapely 2.0.3
six 1.16.0
slicerator 1.1.0
smmap 5.0.1
sniffio 1.3.1
sounddevice 0.4.6
soupsieve 2.5
spandrel 0.1.6
starlette 0.26.1
svg.path 6.3
svglib 1.5.1
sympy 1.12
tabulate 0.9.0
termcolor 2.4.0
threadpoolctl 3.3.0
tifffile 2024.2.12
timm 0.9.16
tinycss2 1.2.1
tokenizers 0.13.3
tomesd 0.1.3
toolz 0.12.1
torch 2.1.2+cu121
torchdiffeq 0.2.3
torchmetrics 1.3.2
torchsde 0.2.6
torchvision 0.16.2+cu121
tqdm 4.66.2
trampoline 0.1.2
transformers 4.30.2
trimesh 4.2.0
typing_extensions 4.10.0
tzdata 2024.1
urllib3 2.2.1
uvicorn 0.28.0
vhacdx 0.0.6
wcwidth 0.2.13
webencodings 0.5.1
websockets 11.0.3
xatlas 0.0.9
xformers 0.0.23.post1
xxhash 3.4.1
yacs 0.1.8
yarl 1.9.4
ZipUnicode 1.1.1

What GPU were you using for launching?

RTX 2080 Super 8 vram

On which platform are you launching the webui backend with the extension?

Local PC setup (Windows)

Settings

This screenshot

Console logs

venv "D:\stable-diffusion-webui\venv\Scripts\Python.exe"
Python 3.10.6 (tags/v3.10.6:9c7b4bd, Aug  1 2022, 21:53:49) [MSC v.1932 64 bit (AMD64)]
Version: v1.8.0
Commit hash: bef51aed032c0aaa5cfd80445bc4cf0d85b408b5
Launching Web UI with arguments: --xformers --medvram --api
CivitAI Browser+: Aria2 RPC started
ControlNet preprocessor location: D:\stable-diffusion-webui\extensions\sd-webui-controlnet\annotator\downloads
2024-03-28 07:47:11,206 - ControlNet - INFO - ControlNet v1.1.441
2024-03-28 07:47:11,445 - ControlNet - INFO - ControlNet v1.1.441
Loading weights [6ce0161689] from D:\stable-diffusion-webui\models\Stable-diffusion\v1-5-pruned-emaonly.safetensors
Creating model from config: D:\stable-diffusion-webui\configs\v1-inference.yaml
Applying attention optimization: xformers... done.
Model loaded in 3.2s (load weights from disk: 0.1s, create model: 0.5s, apply weights to model: 1.8s, apply half(): 0.4s, calculate empty prompt: 0.4s).
2024-03-28 07:47:15,763 - ControlNet - INFO - ControlNet UI callback registered.
*Deforum ControlNet support: enabled*
Running on local URL:  http://127.0.0.1:7860

To create a public link, set `share=True` in `launch()`.
Startup time: 35.5s (prepare environment: 8.1s, import torch: 9.8s, import gradio: 2.1s, setup paths: 2.3s, initialize shared: 0.5s, other imports: 1.2s, load scripts: 4.9s, create ui: 5.0s, gradio launch: 0.6s, add APIs: 1.0s).

Additional information

This is my submission.

[nemodleo]

Dooray! 메일 발송 실패 안내 메일 발송 실패 안내 ***@***.***) 님께 보낸 메일이 전송되지 못하였습니다. 실패 사유를 확인해보세요. * 받는 사람 :  ***@***.***) * 발송 시간 :  2024-03-29T00:09:40 * 메일 제목 :  [kabachuha/sd-webui-text2video] [Bug]: When I try to run ModelScope text2video it does nothing after pressing 'Generate'. (Issue #243) * 실패 사유 :  대외비/기밀 메일은 외부 계정으로 발송이 제한되어 일부 메일 발송 실패(수신자가 전달 설정한 경우 포함) 이 메일은 발신전용으로 회신되지 않습니다. 더 궁금하신 사항은 ***@***.*** 으로 문의해 주시기 바랍니다. © Dooray!.

[fmnt-whoa]

I'm having the same issue. I can see my ModelScope and Zeroscope v2 XL models in the Model dropdown within the txt2video tab.

But when I click on "Generate", no generation begins. No progress in the Stable Diffusion command prompt. It's like it's not making the connection. Just like you, @rookiemann, the orange "Generate" button switches to the two gray buttons "Interrupt" and "Skip".

One thought, I have Stable Diffusion installed on a different drive (d:/) - not my system drive (win11, c:/). @rookiemann - Any chance your SD installation is also on a different drive? I wonder if it's not reading something.

[diegoparma]

Same problem here... I did no less than 5 fresh new install but no output at all :D

[rookiemann]

I'm having the same issue. I can see my ModelScope and Zeroscope v2 XL models in the Model dropdown within the txt2video tab.

But when I click on "Generate", no generation begins. No progress in the Stable Diffusion command prompt. It's like it's not making the connection. Just like you, @rookiemann, the orange "Generate" button switches to the two gray buttons "Interrupt" and "Skip".

One thought, I have Stable Diffusion installed on a different drive (d:/) - not my system drive (win11, c:/). @rookiemann - Any chance your SD installation is also on a different drive? I wonder if it's not reading something.

Yes I have my whole installation on an external D drive, but that was never a problem before.

[fmnt-whoa]

Yes I have my whole installation on an external D drive, but that was never a problem before.

Copy. Was text2vid working in a previous iteration for you?

[rookiemann]

Yes it was working on a older installation of automatic1111, I can't remember which. I was away from using the repo for a long time and decided to update it and all my extensions. After that it wasn't working. I then did entire new installs of both automatic1111 and latest text2video extension just to be sure and the problem persisted. I never tried installing on C:, I just don't have the room.

[fmnt-whoa]

Legacy versions may be the answer then in the interim. I only recently installed SD and t2v so latest versions for me as of a couple weeks ago.

But the fact that it doesn't actually initiate anything in the command prompt makes me think it's gotta be in the launch process, otherwise we'd have some indication or failure shown.

[rookiemann]

Legacy versions may be the answer then in the interim. I only recently installed SD and t2v so latest versions for me as of a couple weeks ago.

But the fact that it doesn't actually initiate anything in the command prompt makes me think it's gotta be in the launch process, otherwise we'd have some indication or failure shown.

I think I want to make a separate install of older repos because I really like this extension and want to use older version. Did you try that? Can you suggest which older versions and where to get them to make the separate install to use this?

[ninii3]

I have exactly same problem... took me a day to figure out but still got no solution ...

[rookiemann]

I have exactly same problem... took me a day to figure out but still got no solution ...

Do you have AnimateDiff extension as well? I'm wondering if there is a connection there.

[fmnt-whoa]

I have exactly same problem... took me a day to figure out but still got no solution ...

@ninii3 - Can you share your Command Prompt output as well? Does Text2Video even attempt to initiate?

Do you have AnimateDiff extension as well? I'm wondering if there is a connection there.

@rookiemann - I know that question is not for me, but I did install a few plugins prior text2video. I don't remember which. But you did say you did a clean install of Stable Diffusion and text2video and still had the issue, right? Was AnimateDiff a part of the clean install?

I think I want to make a separate install of older repos because I really like this extension and want to use older version. Did you try that? Can you suggest which older versions and where to get them to make the separate install to use this?

@rookiemann - I've only ever installed the most recent version of it, and it didn't work. I'd need to do the same as you and just start installing them one-by-one, working backwards, to see if we get a working one. I haven't had time to attempt that yet though.

[ninii3]

I have exactly same problem... took me a day to figure out but still got no solution ...

@ninii3 - Can you share your Command Prompt output as well? Does Text2Video even attempt to initiate?

Do you have AnimateDiff extension as well? I'm wondering if there is a connection there.

@rookiemann - I know that question is not for me, but I did install a few plugins prior text2video. I don't remember which. But you did say you did a clean install of Stable Diffusion and text2video and still had the issue, right? Was AnimateDiff a part of the clean install?

I think I want to make a separate install of older repos because I really like this extension and want to use older version. Did you try that? Can you suggest which older versions and where to get them to make the separate install to use this?

@rookiemann - I've only ever installed the most recent version of it, and it didn't work. I'd need to do the same as you and just start installing them one-by-one, working backwards, to see if we get a working one. I haven't had time to attempt that yet though.

nothing happened at all and no error in my terminal as well.

[ninii3]

I have exactly same problem... took me a day to figure out but still got no solution ...我也遇到了完全相同的问题...

@ninii3 - Can you share your Command Prompt output as well? Does Text2Video even attempt to initiate?- 你能分

Do you have AnimateDiff extension as well? I'm wondering if there is a connection there.你也安装了 AnimateDiff

@rookiemann - I know that question is not for me, but I did install a few plugins prior text2video. I don't remember which. But you did say you did a clean install of Stable Diffusion and text2video and still had the issue, right? Was AnimateDiff a part of the clean install?-

I think I want to make a separate install of older repos because I really like this extension and want to use older version. Did you try that? Can you suggest which older versions and where to get them to make the separate install to use this?

@rookiemann - I've only ever installed the most recent version of it, and it didn't work. I'd need to do the same as you and just start installing them one-by-one, working backwards, to see if we get a working one. I haven't had time to attempt that yet though.

do you know how to install the past version ?

[BigShaka77]

Same problem I still haven't found a solution, someone has?