Configurtion option ist nich verfügbar

[J1990c]

The Problem

Hallo Zusammen,

nach dem ich das Problem gelöst hatte welches ich nach dem neu aufsetzen der Version 16.0.0 Ai on the edge nicht starten wollte weil die Version.txt gefehlt hatte, habe ich das nächste Problem und möchte dafür nicht wieder 3 Tage versenken.

Aktuell komme ich nicht in die Configuration rein da bekomme ich eine Fehlermeldung:

Wenn ich dahin möchte

Somit kann ich aktuell mein System nicht konfigurieren und in MQTT einbinden.
Hat wer eine Idee wie ich das Problem lösen kann bzw Abhilfe schaffen kann.

beste Grüße
CJ

Version

v16.0.0

Logfile

[0d00h00m12s] 2025-06-02T21:26:56	<INF>	[SNTP] =================================================
[0d00h00m12s] 2025-06-02T21:26:56	<INF>	[SNTP] ==================== Start ======================
[0d00h00m12s] 2025-06-02T21:26:56	<INF>	[SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m12s] 2025-06-02T21:26:56	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2025-06-02 21:26:56
[0d00h00m13s] 2025-06-02T21:26:57	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m13s] 2025-06-02T21:26:57	<INF>	[MAIN] SD card info: Name: SC16G, Capacity: 15193MB, Free: 15170MB
[0d00h00m15s] 2025-06-02T21:26:59	<INF>	[MAIN] Initialization completed successfully
[0d00h00m17s] 2025-06-02T21:27:01	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m18s] 2025-06-02T21:27:01	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m18s] 2025-06-02T21:27:01	<INF>	[LOGFILE] Set log level to ERROR
[0d00h00m00s] 2025-06-02T19:54:57	<INF>	[MAIN] =================================================
[0d00h00m00s] 2025-06-02T19:54:57	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2025-06-02T19:54:57	<INF>	[MAIN] =================================================
[0d00h00m00s] 2025-06-02T19:54:57	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-06-02T19:54:57	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-06-02T19:54:58	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-06-02T19:54:58	<INF>	[MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-06-02T19:55:00	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m03s] 2025-06-02T19:55:00	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2025-06-02T19:55:00	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[SNTP] Time is already set: 2025-06-02 21:55:00
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
0d00h00m03s] 2025-06-02T21:55:00	<INF>	[MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WLANINI] SSID: XXXXXXXXXXXXXXXXXXXXX
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WLANINI] Hostname: Powermeter
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WIFI] Set hostname to: Powermeter
[0d00h00m03s] 2025-06-02T21:55:00	<INF>	[WIFI] Init successful
[0d00h00m06s] 2025-06-02T21:55:03	<INF>	[WIFI] Connected to: W-Lan, RSSI: -59
[0d00h00m07s] 2025-06-02T21:55:04	<INF>	[WIFI] Assigned IP: 192.168.X.X
[0d00h00m23s] 2025-06-02T21:55:20	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m23s] 2025-06-02T21:55:20	<INF>	[MAIN] SD card info: Name: SC16G, Capacity: 15193MB, Free: 15170MB
[0d00h00m25s] 2025-06-02T21:55:22	<INF>	[MAIN] Initialization completed successfully
[0d00h00m27s] 2025-06-02T21:55:25	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m27s] 2025-06-02T21:55:25	<INF>	[LOGFILE] Set log level to ERROR

Expected Behavior

No response

Screenshots

No response

Additional Context

No response

[caco3]

weil die Version.txt gefehlt hatte

Das bedeutet, Du hast es nicht gemäss Anleitung aufgesetzt!
Du darfst nicht direkt die Dateien aus dem Repo nehmen sondern musst die generierten ZIP-Dateien verwenden!
Dadurch wird sich auch dein nächstes Problem lösen.

Falls Du http://192.168.X.X/ota_page.html erreichen kannst, kannst Du einfach nochmals ein Update einspielen. Ansonsten musst du die SD-Karte gemäss Anleitung vorbereiten.