Nodemcu + lora sx1262

[frogg1ven]

Hi,
I have problem with nodemcu and RadioLib library, I uploaded example "SX126x_Receive" and setup correct pins, after that nodemcu keeps reseting after while in loop with console output:
[SX1262] Initializing ... H⸮⸮⸮�!⸮⸮⸮⸮

Correct pin settings: NSS pin: 8, DIO1 pin: 3, NRST pin: 2, BUSY pin: 4.

With default (wrong) pins, serial console output looks like this:
H!⸮⸮�!⸮⸮⸮⸮[SX1262] Initializing ... failed, code -705 18:23:49.766 -> 18:23:49.766 -> --------------- CUT HERE FOR EXCEPTION DECODER --------------- 18:23:49.813 -> 18:23:49.813 -> Soft WDT reset 18:23:49.813 -> 18:23:49.813 -> >>>stack>>> 18:23:49.861 -> 18:23:49.861 -> ctx: cont 18:23:49.861 -> sp: 3ffffde0 end: 3fffffc0 offset: 01a0 18:23:49.909 -> 3fffff80: fffffd3f 0000000a 3ffee364 402010a1 18:23:49.956 -> 3fffff90: 0000000a 00000008 3fcccccd 00000000 18:23:50.001 -> 3fffffa0: 3fffdad0 00000000 3ffee38c 40204660 18:23:50.047 -> 3fffffb0: feefeffe feefeffe 3ffe84e0 40100ff9 18:23:50.094 -> <<<stack<<< 18:23:50.141 -> 18:23:50.141 -> --------------- CUT HERE FOR EXCEPTION DECODER ---------------

It seems that, it's reseting at radio.begin() function. Can you help me with this problem?

[frogg1ven]

problem solver, pins were wrong, nodemcu has separate pin numbers

[jgromes]

The pins provided in the examples are just that - examples, you can set them to pretty much anything you want. Of course it has match the hardware ;)