Wlan connection

[KiWyFox]

i cant connect to my home wlan.
what i noticed over serial monitor is the following:
it only picks up the first word of my ssid.
my ssid contains three words with a space after the first and second word.

Is there a way to fix this in the code?

Can i flip the image permanently horizontal and vertical from the code?

[jameszah]

ESP32-CAM-Video-Recorder-junior/v62/ESP32-CAM-Video-Recorder-junior-62/ESP32-CAM-Video-Recorder-junior-62.ino

Line 627 in ee65f22

cname = config_file.readStringUntil(' ');

All these lines read the config file until they find a space " " separator.
You could change it to find a tilde "~" or colon ":" separator

from this:
cname = config_file.readStringUntil(' ');

to this:
cname = config_file.readStringUntil('~');

ESP32-CAM-Video-Recorder-junior/v62/ESP32-CAM-Video-Recorder-junior-62/config.h

Line 237 in ee65f22

const char config_txt[] PROGMEM =

And then the file would change from

desklens  // camera name
13  // framesize  13=hd
1800  // length of video in seconds
0  // interval - ms between recording frames 
1  // speedup - multiply framerate 
0  // streamdelay - ms between streaming frames
GMT  // timezone
ssid  // ssid #1 wifi name
12344321  // ssid password
ssid  // ssid $2 wifi name
12344321  // ssid password
ssid  // AP ssid wifi name - switch to camaera name if it is ssid
12344321  // ssid password

to

desklens~ // camera name
13~ // framesize  13=hd
1800~

etc.

You would probably change the entire file, rather than just ssid.
Might take a little debugging ????

[KiWyFox]

thanks for your fast reply.

i have replaced the space with a tilde "~" and on second try with colon ":" as separator.
also edited the config.h with added tilde or colon.
Sadly i still cant connect to the network with spaces in the ssid.

looks like i have no other choice then changing my routers ssid to one without spaces..

maybe you have an idea how to flip the image horizontal and vertical?

[jameszah]

Did you make all the changes ... 7 or 8 lines with read until space?

[jameszah]

ESP32-CAM-Video-Recorder-junior/v62/ESP32-CAM-Video-Recorder-junior-62/ESP32-CAM-Video-Recorder-junior-62.ino

Line 518 in ee65f22

ss->set_hmirror(ss, 1); // 0 = disable , 1 = enable

[jameszah]

https://randomnerdtutorials.com/esp32-cam-ov2640-camera-settings/

hmirror and vflip

[KiWyFox]

My mistake🙈.
I only changed line 627 first. Now that I've changed everything else, I can connect to my home network without any problems. Flipping the image horizontally also works perfectly.
Thank you so much for your help and the great project for saving the ESP32 cam locally on an SD card.