Merge tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

gregkh · gregkh · commit ffd1f150fffe · 2023-10-06T16:58:28.000+02:00
Jonathan writes: 1st set of IIO fixes for 6.6 Note last minute rebase to fix up a stale Fixes tag. All patches have been in Linux-next for some time. adi,ad3552r - Fix swapped device IDs for the two parts that are supported. adi,ad7192 - Use the right reference voltage source. adi,ad7292 - Fix additionalProperties to be false, not true. adi,ad74413 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER adi,admv1013 - Fix up some corner cases for the mixer vgate register value. bosch,bmp280 - Fix a null pointer dereference caused by a wrong boolean operator. bosch,bno055 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER freescale,imx8eqxp - Fix some wrong register addresses. google,cros_ec - Fix a use after free if very badly timed buffer disable occurs by holding the device in buffered mode. infineon,dps310 - Expand a timeout so we don't hit it on working parts. meas,m5611 - Allow for a ROM CRC of 0 as it is a valid value and there are devices out there where it happens. murata,irsd200 - Make sure the buffer used to build up the scan is large enough to take the timestamp. rohm,bu27010 binding - Add a missing required vdd-supply vishay,vcnl4000 - Don't power down chip in wrong place. * tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: pressure: ms5611: ms5611_prom_is_valid false negative bug dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes iio: adc: ad7192: Correct reference voltage iio: light: vcnl4000: Don't power on/off chip in config iio: addac: Kconfig: update ad74413r selections iio: pressure: dps310: Adjust Timeout Settings iio: imu: bno055: Fix missing Kconfig dependencies iio: adc: imx8qxp: Fix address for command buffer registers iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data() iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example iio: admv1013: add mixer_vgate corner cases iio: pressure: bmp280: Fix NULL pointer exception iio: dac: ad3552r: Correct device IDs
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -61,7 +61,7 @@ patternProperties:
     required:
       - reg
 
-    additionalProperties: true
+    additionalProperties: false
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -45,5 +45,6 @@ examples:
       light-sensor@38 {
         compatible = "rohm,bu27010";
         reg = <0x38>;
+        vdd-supply = <&vdd>;
       };
     };
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
@@ -177,6 +177,7 @@ struct ad7192_chip_info {
 struct ad7192_state {
 	const struct ad7192_chip_info	*chip_info;
 	struct regulator		*avdd;
+	struct regulator		*vref;
 	struct clk			*mclk;
 	u16				int_vref_mv;
 	u32				fclk;
@@ -1008,10 +1009,30 @@ static int ad7192_probe(struct spi_device *spi)
 	if (ret)
 		return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
 
-	ret = regulator_get_voltage(st->avdd);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
-		return ret;
+	st->vref = devm_regulator_get_optional(&spi->dev, "vref");
+	if (IS_ERR(st->vref)) {
+		if (PTR_ERR(st->vref) != -ENODEV)
+			return PTR_ERR(st->vref);
+
+		ret = regulator_get_voltage(st->avdd);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, AVdd voltage undefined\n");
+	} else {
+		ret = regulator_enable(st->vref);
+		if (ret) {
+			dev_err(&spi->dev, "Failed to enable specified Vref supply\n");
+			return ret;
+		}
+
+		ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->vref);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(st->vref);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, Vref voltage undefined\n");
 	}
 	st->int_vref_mv = ret / 1000;
 
diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c
@@ -38,8 +38,8 @@
 #define IMX8QXP_ADR_ADC_FCTRL		0x30
 #define IMX8QXP_ADR_ADC_SWTRIG		0x34
 #define IMX8QXP_ADR_ADC_TCTRL(tid)	(0xc0 + (tid) * 4)
-#define IMX8QXP_ADR_ADC_CMDH(cid)	(0x100 + (cid) * 8)
-#define IMX8QXP_ADR_ADC_CMDL(cid)	(0x104 + (cid) * 8)
+#define IMX8QXP_ADR_ADC_CMDL(cid)	(0x100 + (cid) * 8)
+#define IMX8QXP_ADR_ADC_CMDH(cid)	(0x104 + (cid) * 8)
 #define IMX8QXP_ADR_ADC_RESFIFO		0x300
 #define IMX8QXP_ADR_ADC_TST		0xffc
 
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
@@ -24,6 +24,8 @@ config AD74413R
 	depends on GPIOLIB && SPI
 	select REGMAP_SPI
 	select CRC8
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD74412R/AD74413R
 	  quad-channel software configurable input/output solution.
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -190,8 +190,11 @@ int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
 	/*
 	 * Ignore samples if the buffer is not set: it is needed if the ODR is
 	 * set but the buffer is not enabled yet.
+	 *
+	 * Note: iio_device_claim_buffer_mode() returns -EBUSY if the buffer
+	 * is not enabled.
 	 */
-	if (!iio_buffer_enabled(indio_dev))
+	if (iio_device_claim_buffer_mode(indio_dev) < 0)
 		return 0;
 
 	out = (s16 *)st->samples;
@@ -210,6 +213,7 @@ int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
 	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
 					   timestamp + delta);
 
+	iio_device_release_buffer_mode(indio_dev);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
@@ -140,8 +140,8 @@ enum ad3552r_ch_vref_select {
 };
 
 enum ad3542r_id {
-	AD3542R_ID = 0x4008,
-	AD3552R_ID = 0x4009,
+	AD3542R_ID = 0x4009,
+	AD3552R_ID = 0x4008,
 };
 
 enum ad3552r_ch_output_range {
diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
@@ -351,9 +351,9 @@ static int admv1013_update_mixer_vgate(struct admv1013_state *st)
 	if (vcm < 0)
 		return vcm;
 
-	if (vcm < 1800000)
+	if (vcm <= 1800000)
 		mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
-	else if (vcm > 1800000 && vcm < 2600000)
+	else if (vcm > 1800000 && vcm <= 2600000)
 		mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
 	else
 		return -EINVAL;
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
@@ -2,6 +2,8 @@
 
 config BOSCH_BNO055
 	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 
 config BOSCH_BNO055_SERIAL
 	tristate "Bosch BNO055 attached via UART"
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
@@ -1513,7 +1513,6 @@ static int vcnl4040_write_event_config(struct iio_dev *indio_dev,
 
 out:
 	mutex_unlock(&data->vcnl4000_lock);
-	data->chip_spec->set_power_state(data, data->ps_int || data->als_int);
 
 	return ret;
 }
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
@@ -2179,7 +2179,7 @@ int bmp280_common_probe(struct device *dev,
 	 * however as it happens, the BMP085 shares the chip ID of BMP180
 	 * so we look for an IRQ if we have that.
 	 */
-	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
+	if (irq > 0 && (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
 			return ret;
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
@@ -57,8 +57,8 @@
 #define  DPS310_RESET_MAGIC	0x09
 #define DPS310_COEF_BASE	0x10
 
-/* Make sure sleep time is <= 20ms for usleep_range */
-#define DPS310_POLL_SLEEP_US(t)		min(20000, (t) / 8)
+/* Make sure sleep time is <= 30ms for usleep_range */
+#define DPS310_POLL_SLEEP_US(t)		min(30000, (t) / 8)
 /* Silently handle error in rate value here */
 #define DPS310_POLL_TIMEOUT_US(rc)	((rc) <= 0 ? 1000000 : 1000000 / (rc))
 
@@ -402,8 +402,8 @@ static int dps310_reset_wait(struct dps310_data *data)
 	if (rc)
 		return rc;
 
-	/* Wait for device chip access: 2.5ms in specification */
-	usleep_range(2500, 12000);
+	/* Wait for device chip access: 15ms in specification */
+	usleep_range(15000, 55000);
 	return 0;
 }
 
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
@@ -76,7 +76,7 @@ static bool ms5611_prom_is_valid(u16 *prom, size_t len)
 
 	crc = (crc >> 12) & 0x000F;
 
-	return crc_orig != 0x0000 && crc == crc_orig;
+	return crc == crc_orig;
 }
 
 static int ms5611_read_prom(struct iio_dev *indio_dev)
diff --git a/drivers/iio/proximity/irsd200.c b/drivers/iio/proximity/irsd200.c
@@ -759,14 +759,14 @@ static irqreturn_t irsd200_trigger_handler(int irq, void *pollf)
 {
 	struct iio_dev *indio_dev = ((struct iio_poll_func *)pollf)->indio_dev;
 	struct irsd200_data *data = iio_priv(indio_dev);
-	s16 buf = 0;
+	s64 buf[2] = {};
 	int ret;
 
-	ret = irsd200_read_data(data, &buf);
+	ret = irsd200_read_data(data, (s16 *)buf);
 	if (ret)
 		goto end;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, &buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, buf,
 					   iio_get_time_ns(indio_dev));
 
 end:

Original file line number	Diff line number	Diff line change
`@@ -1513,7 +1513,6 @@ static int vcnl4040_write_event_config(struct iio_dev *indio_dev,`
`1513`	`1513`
`1514`	`1514`	`out:`
`1515`	`1515`	`mutex_unlock(&data->vcnl4000_lock);`
`1516`		`- data->chip_spec->set_power_state(data, data->ps_int \|\| data->als_int);`
`1517`	`1516`
`1518`	`1517`	`return ret;`
`1519`	`1518`	`}`