diff --git a/src/main/target/BROTHERHOBBYH743/CMakeLists.txt b/src/main/target/BROTHERHOBBYH743/CMakeLists.txt
new file mode 100644
index 00000000000..b40fef552fe
--- /dev/null
+++ b/src/main/target/BROTHERHOBBYH743/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32h743xi(BROTHERHOBBYH743)
diff --git a/src/main/target/BROTHERHOBBYH743/config.c b/src/main/target/BROTHERHOBBYH743/config.c
new file mode 100644
index 00000000000..1065971614a
--- /dev/null
+++ b/src/main/target/BROTHERHOBBYH743/config.c
@@ -0,0 +1,32 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight. If not, see .
+ */
+
+#include
+
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+#include "fc/config.h"
+
+#include "io/piniobox.h"
+
+void targetConfiguration(void)
+{
+ pinioBoxConfigMutable()->permanentId[0] = BOX_PERMANENT_ID_USER1;
+ pinioBoxConfigMutable()->permanentId[1] = BOX_PERMANENT_ID_USER2;
+ beeperConfigMutable()->pwmMode = true;
+}
diff --git a/src/main/target/BROTHERHOBBYH743/target.c b/src/main/target/BROTHERHOBBYH743/target.c
new file mode 100644
index 00000000000..f9aff080788
--- /dev/null
+++ b/src/main/target/BROTHERHOBBYH743/target.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV. If not, see .
+ */
+
+#include
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+BUSDEV_REGISTER_SPI_TAG(busdev_icm42605, DEVHW_ICM42605, ICM42605_SPI_BUS, ICM42605_CS_PIN, NONE, 0, DEVFLAGS_NONE, IMU_ICM42605_ALIGN);
+BUSDEV_REGISTER_SPI_TAG(busdev_icm42605_2, DEVHW_ICM42605, ICM42605_SPI_BUS_2, ICM42605_CS_PIN_2, NONE, 0, DEVFLAGS_NONE, IMU_ICM42605_ALIGN_2);
+
+timerHardware_t timerHardware[] = {
+ DEF_TIM(TIM3, CH3, PB0, TIM_USE_OUTPUT_AUTO, 0, 0), // S1
+ DEF_TIM(TIM3, CH4, PB1, TIM_USE_OUTPUT_AUTO, 0, 1), // S2
+
+ DEF_TIM(TIM5, CH1, PA0, TIM_USE_OUTPUT_AUTO, 0, 2), // S3
+ DEF_TIM(TIM5, CH2, PA1, TIM_USE_OUTPUT_AUTO, 0, 3), // S4
+ DEF_TIM(TIM5, CH3, PA2, TIM_USE_OUTPUT_AUTO, 0, 4), // S5
+ DEF_TIM(TIM5, CH4, PA3, TIM_USE_OUTPUT_AUTO, 0, 5), // S6
+
+ DEF_TIM(TIM4, CH1, PD12, TIM_USE_OUTPUT_AUTO, 0, 6), // S7
+ DEF_TIM(TIM4, CH2, PD13, TIM_USE_OUTPUT_AUTO, 0, 7), // S8
+ DEF_TIM(TIM4, CH3, PD14, TIM_USE_OUTPUT_AUTO, 0, 0), // S9
+ DEF_TIM(TIM4, CH4, PD15, TIM_USE_OUTPUT_AUTO, 0, 0), // S10 DMA_NONE
+
+ DEF_TIM(TIM15, CH1, PE5, TIM_USE_OUTPUT_AUTO, 0, 0), // S11
+ DEF_TIM(TIM15, CH2, PE6, TIM_USE_OUTPUT_AUTO, 0, 0), // S12 DMA_NONE
+
+ DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 9), // LED_2812
+ DEF_TIM(TIM2, CH1, PA15, TIM_USE_BEEPER, 0, 0), // BEEPER PWM
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/BROTHERHOBBYH743/target.h b/src/main/target/BROTHERHOBBYH743/target.h
new file mode 100644
index 00000000000..b069f0ccfd0
--- /dev/null
+++ b/src/main/target/BROTHERHOBBYH743/target.h
@@ -0,0 +1,187 @@
+/*
+ * This file is part of INAV Project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License Version 3, as described below:
+ *
+ * This file is free software: you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see http://www.gnu.org/licenses/.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "BROT"
+#define USBD_PRODUCT_STRING "BROTHERHOBBYH743"
+
+#define USE_TARGET_CONFIG
+
+#define LED0 PE9
+#define LED1 PA7
+
+#define BEEPER PA15
+#define BEEPER_INVERTED
+#define BEEPER_PWM_FREQUENCY 2000
+
+// *************** IMU generic ***********************
+#define USE_DUAL_GYRO
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+// *************** SPI1 IMU0 ICM42605 ****************
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN PA5
+#define SPI1_MISO_PIN PA6
+#define SPI1_MOSI_PIN PD7
+
+#define USE_IMU_ICM42605
+
+#define IMU_ICM42605_ALIGN CW90_DEG
+#define ICM42605_SPI_BUS BUS_SPI1
+#define ICM42605_CS_PIN PC15
+
+// *************** SPI4 IMU1 ICM42605 **************
+#define USE_SPI_DEVICE_4
+#define SPI4_SCK_PIN PE12
+#define SPI4_MISO_PIN PE13
+#define SPI4_MOSI_PIN PE14
+
+#define USE_IMU_ICM42605
+
+#define IMU_ICM42605_ALIGN_2 CW0_DEG
+#define ICM42605_SPI_BUS_2 BUS_SPI4
+#define ICM42605_CS_PIN_2 PE11
+
+// *************** SPI2 OSD ***********************
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS BUS_SPI2
+#define MAX7456_CS_PIN PB12
+
+// *************** SPI3 ************************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN PB3
+#define SPI3_MISO_PIN PB4
+#define SPI3_MOSI_PIN PB5
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL PB6
+#define I2C1_SDA PB7
+
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL PB10
+#define I2C2_SDA PB11
+
+#define USE_BARO
+#define BARO_I2C_BUS BUS_I2C2
+#define USE_BARO_ALL
+
+#define USE_MAG
+#define MAG_I2C_BUS BUS_I2C1
+#define USE_MAG_ALL
+
+#define TEMPERATURE_I2C_BUS BUS_I2C1
+#define PITOT_I2C_BUS BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS BUS_I2C1
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+
+#define USE_UART2
+#define UART2_TX_PIN PD5
+#define UART2_RX_PIN PD6
+
+#define USE_UART3
+#define UART3_TX_PIN PD8
+#define UART3_RX_PIN PD9
+
+#define USE_UART4
+#define UART4_TX_PIN PB9
+#define UART4_RX_PIN PB8
+
+#define USE_UART6
+#define UART6_TX_PIN PC6
+#define UART6_RX_PIN PC7
+
+#define USE_UART7
+#define UART7_TX_PIN PE8
+#define UART7_RX_PIN PE7
+
+#define USE_UART8
+#define UART8_TX_PIN PE1
+#define UART8_RX_PIN PE0
+
+#define SERIAL_PORT_COUNT 8
+
+#define DEFAULT_RX_TYPE RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER SERIALRX_CRSF
+#define SERIALRX_UART SERIAL_PORT_USART2
+
+// *************** SDIO SD BLACKBOX*******************
+#define USE_SDCARD
+#define USE_SDCARD_SDIO
+#define SDCARD_SDIO_DEVICE SDIODEV_1
+#define SDCARD_SDIO_4BIT
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE ADC1
+
+#define ADC_CHANNEL_1_PIN PC0 //ADC123 VBAT1
+#define ADC_CHANNEL_2_PIN PC1 //ADC123 CURR1
+#define ADC_CHANNEL_3_PIN PC5 //ADC12 RSSI
+
+#define VBAT_ADC_CHANNEL ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL ADC_CHN_2
+#define RSSI_ADC_CHANNEL ADC_CHN_3
+
+// *************** PINIO ***************************
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN PD10
+#define PINIO2_PIN PD11
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN PA8
+
+#define DEFAULT_FEATURES (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL | FEATURE_BLACKBOX)
+#define CURRENT_METER_SCALE 250
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA (0xffff & ~(BIT(14) | BIT(13)))
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+#define TARGET_IO_PORTE 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS 15
+#define USE_DSHOT
+#define USE_ESC_SENSOR