How to escape commas in per-device input configuration?

[charging1948]

I tried matching the touchscreen of my Lenovo M14t to that display only. Unfortunately the device includes , in its device name. Seeing that a similar issue was already discussed in #2130, i decided to open this discussion.

Output of hyprctl devices:

Touch:
        Touch Device at 55efd0840610:
                wacom-co.,ltd.-pen-and-multitouch-sensor
        Touch Device at 55efce916500:
                wacom-co.,ltd.-pen-and-multitouch-sensor-unknown
        Touch Device at 55efcec56910:
                wacom-co.,ltd.-pen-and-multitouch-sensor-1

Here is the config, which i tried to use:

device {
    name = wacom-co.,ltd.-pen-and-multitouch-sensor
    output = desc:Lenovo Group Limited M14t V3071PA9
}

device {
    name = wacom-co.,ltd.-pen-and-multitouch-sensor-1
    output = desc:Lenovo Group Limited M14t V3071PA9
}

device {
    name = wacom-co.,ltd.-pen-and-multitouch-sensor-unknown
    output = desc:Lenovo Group Limited M14t V3071PA9
}

I guess that is just a matter of sanitization, like the other discussion.

[vaxerski]

they should be sanitized yeaa

[vaxerski]

just pushed a commit that fixes this

[Dregu]

There are still a ton of things that can't be done because of the real issue, which is we can't escape commas...

[vaxerski]

like?

[Dregu]

Can't set rgba colors with window rules, can't set css style gaps with workspace rules seem to at least pop up every week...

[vaxerski]

right. I think we have escaping support in hyprutils now we could use that