Überskalierung bei zwei Smart-Battery-Speichern? #1705

dk7td · 2025-03-06T20:21:11Z

dk7td
Mar 6, 2025

Hallo zusammen!

Heute habe ich die Overscaling-Option im DPL entdeckt, die lt. Info-Bubble für ungenutzte Eingänge oder Verschattungen gedacht ist.

Hier läuft ein HM-800, der an jedem Eingang einen Zendure-Hub1200 mit einem AB2000 hängen hat. Nun kommt es durchaus vor, daß einer der Speicher zuerst die von mir festgelegte Einspeise-Schwelle erreicht oder nachts einer zuerst leer ist, und somit nur noch einer der beiden Eingänge bestromt wird. Damit geht dann auch die Einspeiseleistung auf die Hälfte runter.
Das sollte doch ein idealer Einsatzfall für dieses Overscaling sein, falls ich das nicht falsch verstanden habe?

Jetzt ist mir allerdings nicht ganz klar, was es mit dem „Schwellenwert für Überskalierung“ genau auf sich hat, bzw. worauf sich dieser bezieht.

Bin für jeden Tip und Hinweis dankbar!
Beste Grüße, Didi

Harisjems · 2025-03-06T20:26:53Z

Harisjems
Mar 6, 2025

Du hast dein WR an Batterie hängen und Überskalirung ist für die Solarbetrieben WR gedacht.Für deine Szenario sollte man Smart Buffer Batterie als Quelle nehmen.

5 replies

dk7td Mar 6, 2025
Author

Das habe ich schon verstanden. Aber wenn einer der beiden Speicher leer ist, dann ist das Verhalten doch vergleichbar mit einem verschatteten Modul an einem Eingang. Daher nahm ich an, daß das eine sinnvolle Lösung sein könnte.

Smart Buffer Battery hab ich natürlich eingestellt.

Außerdem möchte ich gerne die prozentuale Einstellung der Überskalierung verstehen.

Danke!

AndreasBoehm Mar 6, 2025
Maintainer

@Harisjems diese Aussage ist falsch.

Überskalierung kann genuzt werden um unbenutzte Eingänge oder Eingänge die zu wenig Leistung liefern (verschattetes Modul oder Smart Buffer der unterschiedlich viel Leistung an seinen Ausgängen abgibt) auszugleichen. Dieses Feature ist genau für das gemacht was du vor hast @dk7td .

In der Info Box steht folgendes: „Minimale Eingangsleistungsschwelle (%). Eingänge unterhalb dieses Prozentsatzes werden als verschattet/ungenutzt bewertet.“

Tatsächliche Leistung vs erwartete Leistung aufgrund des aktuellen WR Limits

Harisjems Mar 7, 2025

Okay. Sorry @dk7td für die Falschinformation :-) Ich bin mir aber sicher, dass ich in irgendeiner Diskussion mitbekommen habe, dass es nur für solargespeiste WR gedacht war. Aber man kann sich irren. Ich dachte nur, wenn ein Akku nur z. B. 800 W maximal ausgeben kann( 400w pro mppt, beim Marstek zb.)und der DPL 600 W verlangt, ändert das nichts am sinnlose Zappeln des DPL. Bei dee Sonne sieht es anders aus.
Aber Andreas har es entwickelt, der weiss es besser:-)

spcqike Mar 7, 2025

sinnlose Zappeln

kannst du das erklären? Der DPL sollte nicht sinnlos zappeln. Er schwingt höchstens, und zwar dann, wenn irgendwas nicht richtig passt. Also, wenn ein Eingang als verschattet erkannt wird und dann beim folgenden hochskalieren doch auch mehr liefert. Das hat aber meist andere Hardware Probleme als Ursache und kann ggf. mit dem schwellwert etwas abgemildert werden.

dk7td Mar 7, 2025
Author

Moin Andreas!

Überskalierung kann genuzt werden um unbenutzte Eingänge oder Eingänge die zu wenig Leistung liefern (verschattetes Modul oder Smart Buffer der unterschiedlich viel Leistung an seinen Ausgängen abgibt) auszugleichen. Dieses Feature ist genau für das gemacht was du vor hast @dk7td .

Das klingt primär mal sehr gut - danke!

In der Info Box steht folgendes: „Minimale Eingangsleistungsschwelle (%). Eingänge unterhalb dieses Prozentsatzes werden als verschattet/ungenutzt bewertet.“
Tatsächliche Leistung vs erwartete Leistung aufgrund des aktuellen WR Limits

Kannst Du das nochmal genauer ausführen bitte? Ich stehe immer noch auf dem Schlauch.

Ich hatte heute nacht mal probeweise 80% eingestellt und das war das Ergebnis:

Oben sind die beiden Akkus zu sehen. Bei 15% hört die Einspeisung auf. Nachdem der gelbe leer war, ging die Einspeisung auf das 400W-Maximum des verbleibenden Eingangs hoch und die Nulleinspeisung funktionierte nicht mehr. Jetzt stellt sich mir die Frage, woran das liegt.

Schon mal danke für die Hilfe!

Harisjems · 2025-03-07T07:39:34Z

Harisjems
Mar 7, 2025

@spcqike Ich will ja nicht ausschließlich, dass ich es falsch interpretiert habe, ich kann aber nur mit dem Input helfen, was ich habe :-)

0 replies

dk7td · 2025-03-07T07:55:41Z

dk7td
Mar 7, 2025
Author

Hier mal ein Logauszug ohne Überskalierung:

Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:24.261 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 143.00, total: 143.00
08:54:24.307 > Websocket: [/livedata][85] disconnect
08:54:24.574 > Fetch inverter: 114184847551
08:54:24.802 > Request SystemConfigPara
08:54:24.906 > Queue size - NRF: 5 CMT: 0
08:54:25.007 > RX Period End
08:54:25.057 > Success
08:54:25.214 > [DPL inverter 114190550241]: actual limit is 44.1 % (353 W respectively), effective 9483 ms after update started, requested were 44.1 %
08:54:25.260 > [DPL] waiting for sufficiently recent inverter data
08:54:25.321 > TX RealTimeRunData Channel: 75 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 2C 00 00 00 00 00 00 00 00 06 23 33
08:54:25.366 > Interrupt received
08:54:25.519 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 D2 01 AC 07 C6 00 04 00 01 00 00 00 08 27 | -80 dBm
08:54:25.566 > Interrupt received
08:54:25.635 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 02 4A F0 00 08 02 80 00 39 00 00 08 DA 13 8D 07 67 B2 | -80 dBm
08:54:25.682 > Interrupt received
08:54:25.827 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 01 00 54 03 E8 00 84 00 0F 88 C9 62 | -80 dBm
08:54:25.929 > RX Period End
08:54:25.979 > Success
08:54:26.030 > [DPL] waiting for sufficiently recent power meter reading
08:54:26.078 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 31 00 00 00 00 00 00 00 00 56 B6 49
08:54:26.339 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:26.442 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 137.00, total: 137.00
08:54:26.488 > RX Period End
08:54:26.547 > All missing
08:54:26.598 > Nothing received, resend whole request
08:54:26.646 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 31 00 00 00 00 00 00 00 00 56 B6 49
08:54:26.701 > RX Period End
08:54:26.850 > All missing
08:54:26.902 > Nothing received, resend whole request
08:54:26.958 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 31 00 00 00 00 00 00 00 00 56 B6 49
08:54:27.055 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:27.164 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 147.00, total: 147.00
08:54:27.224 > RX Period End
08:54:27.285 > All missing
08:54:27.364 > Nothing received, resend whole request
08:54:27.466 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 31 00 00 00 00 00 00 00 00 56 B6 49
08:54:27.514 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:27.567 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 140.00, total: 140.00
08:54:27.632 > RX Period End
08:54:27.682 > All missing
08:54:27.733 > Nothing received, resend whole request
08:54:27.875 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 31 00 00 00 00 00 00 00 00 56 B6 49
08:54:27.942 > RX Period End
08:54:27.998 > All missing
08:54:28.069 > Nothing received, resend count exeeded
08:54:28.128 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 31 00 00 00 00 00 00 00 00 8C AD 92
08:54:28.192 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:28.235 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 155.00, total: 155.00
08:54:28.285 > [DPL] up 339830 s, NO next inverter restart at 0 s (set to -1)
08:54:28.336 > [DPL] targeting -20 W, base load is 150 W, power meter reads 155.0 W (valid)
08:54:28.490 > [DPL] inverter 114190550241 is behind power meter producing 189 W
08:54:28.536 > [DPL] requesting 364 W from 1 smart-buffer-powered inverter currently producing 189 W (diff 175 W, hysteresis 10 W)
08:54:28.585 > [DPL] will cover 364 W using 1 smart-buffer-powered inverter
08:54:28.642 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:54:28.878 > [DPL inverter 114190550241]:
08:54:28.937 > smart-buffer-powered, producing 189 W
08:54:29.006 > lower/current/upper limit: 50/352/800 W, output capability: 800 W
08:54:29.058 > sending commands enabled, reachable, eligible
08:54:29.105 > max reduction production/standby: 139/189 W, max increase: 448 W
08:54:29.169 > target limit/output/state: 364 W (update)/364 W/production, 0 update timeouts
08:54:29.222 > MPPTs AC power: a: 190 W b: 0 W
08:54:29.271 > [DPL inverter 114190550241]: sending limit of 45.5 % (364 W respectively), max output is 800 W
08:54:29.340 > [DPL] waiting for a start/stop/restart/limit command to complete
08:54:29.390 > RX Period End
08:54:29.447 > All missing
08:54:29.497 > Nothing received, resend whole request
08:54:29.641 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 31 00 00 00 00 00 00 00 00 8C AD 92
08:54:29.717 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:29.923 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 152.00, total: 152.00
08:54:30.216 > Fetch inverter: 114190550241
08:54:30.283 > Queue size - NRF: 5 CMT: 0
08:54:30.538 > RX Period End
08:54:30.583 > All missing
08:54:30.638 > Nothing received, resend whole request
08:54:30.686 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 31 00 00 00 00 00 00 00 00 8C AD 92
08:54:30.732 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:30.776 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 158.00, total: 158.00
08:54:30.823 > RX Period End
08:54:30.872 > All missing
08:54:31.050 > Nothing received, resend whole request
08:54:31.103 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 31 00 00 00 00 00 00 00 00 8C AD 92
08:54:31.163 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:31.228 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 153.00, total: 153.00
08:54:31.307 > RX Period End
08:54:31.355 > All missing
08:54:31.409 > Nothing received, resend whole request
08:54:31.475 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 31 00 00 00 00 00 00 00 00 8C AD 92
08:54:32.067 > RX Period End
08:54:32.120 > All missing
08:54:32.172 > Nothing received, resend count exeeded
08:54:32.229 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 31 00 00 00 00 00 00 00 00 98 B9 86
08:54:32.292 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:32.338 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 154.00, total: 154.00
08:54:32.392 > RX Period End
08:54:32.440 > All missing
08:54:32.487 > Nothing received, resend whole request
08:54:32.587 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 31 00 00 00 00 00 00 00 00 98 B9 86
08:54:32.640 > RX Period End
08:54:32.892 > All missing
08:54:32.995 > Nothing received, resend whole request
08:54:33.040 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 31 00 00 00 00 00 00 00 00 98 B9 86
08:54:33.089 > RX Period End
08:54:33.144 > All missing
08:54:33.221 > Nothing received, resend whole request
08:54:33.295 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 31 00 00 00 00 00 00 00 00 98 B9 86
08:54:33.354 > RX Period End
08:54:33.609 > All missing
08:54:33.711 > Nothing received, resend whole request
08:54:33.766 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 31 00 00 00 00 00 00 00 00 98 B9 86
08:54:33.831 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:34.122 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 144.00, total: 144.00
08:54:34.168 > RX Period End
08:54:34.213 > All missing
08:54:34.260 > Nothing received, resend count exeeded
08:54:34.324 > TX ActivePowerControl (01) Channel: 3 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 C7 00 01 A1 70 62
08:54:34.379 > Interrupt received
08:54:34.642 > RX Channel: 75 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:54:34.838 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:34.940 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 160.00, total: 160.00
08:54:35.007 > Fetch inverter: 114184847551
08:54:35.050 > Request SystemConfigPara
08:54:35.145 > Queue size - NRF: 6 CMT: 0
08:54:35.197 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:35.265 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 141.00, total: 141.00
08:54:35.358 > RX Period End
08:54:35.483 > Success
08:54:35.555 > [DPL inverter 114190550241]: actual limit is 45.5 % (364 W respectively), effective 7190 ms after update started, requested were 45.5 %
08:54:35.601 > [DPL] waiting for sufficiently recent inverter data
08:54:35.650 > TX RealTimeRunData Channel: 23 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 36 00 00 00 00 00 00 00 00 66 90 FA
08:54:35.702 > Interrupt received
08:54:35.863 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 D3 01 A2 07 9B 00 04 00 01 00 00 00 08 75 | -80 dBm
08:54:35.964 > Interrupt received
08:54:36.017 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 02 4A F1 00 08 02 80 00 3A 00 00 08 DD 13 8D 07 3D ED | -80 dBm
08:54:36.074 > Interrupt received
08:54:36.169 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 52 03 E8 00 84 00 0F 1A 06 3A | -80 dBm
08:54:36.229 > RX Period End
08:54:36.276 > Success
08:54:36.322 > [DPL] waiting for sufficiently recent power meter reading
08:54:36.369 > TX AlarmData Channel: 40 --> 15 90 55 02 41 80 18 83 32 80 11 00 67 CA A6 36 00 00 00 00 00 00 00 00 BC 8B 21
08:54:36.420 > Interrupt received
08:54:36.481 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 01 00 01 80 01 00 01 6B 52 6B 52 00 00 00 00 80 02 97 | -80 dBm
08:54:36.528 > Interrupt received
08:54:36.682 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 02 00 02 6B 92 6B 92 00 00 00 0D 00 D0 00 03 6C 86 A1 | -80 dBm
08:54:36.886 > Interrupt received
08:54:36.939 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 03 00 00 00 00 00 DC 00 D2 00 04 6D B2 00 00 00 00 43 | -80 dBm
08:54:36.996 > Interrupt received
08:54:37.091 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 04 00 00 80 02 00 05 6D E6 6D E6 FF FF FF FB 80 02 90 | -80 dBm
08:54:37.140 > Interrupt received
08:54:37.204 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 05 00 06 6E 0F 6E 0F FF FF FF F4 80 02 00 07 6E 1C 6A | -80 dBm
08:54:37.260 > Interrupt received
08:54:37.323 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:37.369 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 139.00, total: 139.00
08:54:37.500 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 06 6E 1C 00 00 00 11 80 02 00 08 6E 53 6E 53 FF FF 7A | -80 dBm
08:54:37.603 > Interrupt received
08:54:37.834 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 09 6E D3 00 00 00 07 80 02 00 0C 6E ED 6E ED FF FF A8 | -80 dBm
08:54:37.911 > Interrupt received
08:54:38.012 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 0A FF FA 80 02 00 0D 6E F1 6E F1 00 00 00 06 80 02 91 | -30 dBm
08:54:38.079 > Interrupt received
08:54:38.159 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 0B 00 0E 6F 14 6F 14 FF FF FF FB 80 02 00 0F 6F 22 54 | -80 dBm
08:54:38.204 > Interrupt received
08:54:38.313 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 8C 6F 22 00 00 00 06 CF A7 3A | -80 dBm
08:54:38.524 > RX Period End
08:54:38.570 > Middle missing
08:54:38.732 > Request retransmit: 7
08:54:38.947 > TX RequestFrame Channel: 61 --> 15 90 55 02 41 80 18 83 32 87 3D
08:54:39.002 > RX Period End
08:54:39.054 > Middle missing
08:54:39.138 > Request retransmit: 7
08:54:39.185 > TX RequestFrame Channel: 75 --> 15 90 55 02 41 80 18 83 32 87 3D
08:54:39.229 > Interrupt received
08:54:39.277 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 07 FF E7 80 02 00 09 6E 5C 6E 5C 00 00 00 18 80 02 9B | -80 dBm
08:54:39.322 > RX Period End
08:54:39.446 > Middle missing
08:54:39.492 > Request retransmit: 8
08:54:39.549 > TX RequestFrame Channel: 3 --> 15 90 55 02 41 80 18 83 32 88 32
08:54:39.602 > Interrupt received
08:54:39.651 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 08 00 0A 6E C6 6E C6 FF FF FF FB 80 02 00 0B 6E D3 A7 | -80 dBm
08:54:39.750 > RX Period End
08:54:39.800 > Success
08:54:39.855 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 3B 00 00 00 00 00 00 00 00 F6 C8 9D
08:54:39.905 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:39.956 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 137.00, total: 137.00
08:54:40.046 > RX Period End
08:54:40.164 > All missing
08:54:40.229 > Nothing received, resend whole request
08:54:40.276 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 3B 00 00 00 00 00 00 00 00 F6 C8 9D
08:54:40.322 > RX Period End
08:54:40.490 > All missing
08:54:40.539 > Nothing received, resend whole request
08:54:40.582 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 3B 00 00 00 00 00 00 00 00 F6 C8 9D
08:54:40.645 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:40.777 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 141.00, total: 141.00
08:54:40.826 > [DPL] up 339840 s, NO next inverter restart at 0 s (set to -1)
08:54:40.982 > [DPL] targeting -20 W, base load is 150 W, power meter reads 141.0 W (valid)
08:54:41.035 > [DPL] inverter 114190550241 is behind power meter producing 185 W
08:54:41.088 > [DPL] requesting 346 W from 1 smart-buffer-powered inverter currently producing 185 W (diff 161 W, hysteresis 10 W)
08:54:41.133 > [DPL] will cover 346 W using 1 smart-buffer-powered inverter
08:54:41.183 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:54:41.233 > [DPL inverter 114190550241]:
08:54:41.317 > smart-buffer-powered, producing 185 W
08:54:41.369 > lower/current/upper limit: 50/364/800 W, output capability: 800 W
08:54:41.494 > sending commands enabled, reachable, eligible
08:54:41.547 > max reduction production/standby: 135/185 W, max increase: 436 W
08:54:41.599 > target limit/output/state: 346 W (update)/346 W/production, 0 update timeouts
08:54:41.652 > MPPTs AC power: a: 185 W b: 0 W
08:54:41.802 > [DPL inverter 114190550241]: sending limit of 43.2 % (346 W respectively), max output is 800 W
08:54:41.903 > [DPL] waiting for a start/stop/restart/limit command to complete
08:54:42.006 > RX Period End
08:54:42.057 > All missing
08:54:42.210 > Nothing received, resend whole request
08:54:42.260 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 3B 00 00 00 00 00 00 00 00 F6 C8 9D
08:54:42.325 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:42.519 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 148.00, total: 148.00
08:54:42.566 > RX Period End
08:54:42.724 > All missing
08:54:42.830 > Nothing received, resend whole request
08:54:42.927 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 3B 00 00 00 00 00 00 00 00 F6 C8 9D
08:54:43.030 > Fetch inverter: 114190550241
08:54:43.133 > Queue size - NRF: 5 CMT: 0
08:54:43.183 > RX Period End
08:54:43.242 > All missing
08:54:43.291 > Nothing received, resend count exeeded
08:54:43.352 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 3B 00 00 00 00 00 00 00 00 2C D3 46
08:54:43.398 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:43.444 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 145.00, total: 145.00
08:54:43.488 > RX Period End
08:54:43.644 > All missing
08:54:43.746 > Nothing received, resend whole request
08:54:43.793 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 3B 00 00 00 00 00 00 00 00 2C D3 46
08:54:43.845 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:43.951 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 153.00, total: 153.00
08:54:43.998 > RX Period End
08:54:44.158 > All missing
08:54:44.212 > Nothing received, resend whole request
08:54:44.259 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 3B 00 00 00 00 00 00 00 00 2C D3 46
08:54:44.320 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:44.363 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 157.00, total: 157.00
08:54:44.464 > RX Period End
08:54:44.566 > All missing
08:54:44.668 > Nothing received, resend whole request
08:54:44.770 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 3B 00 00 00 00 00 00 00 00 2C D3 46
08:54:44.873 > RX Period End
08:54:44.943 > All missing
08:54:45.068 > Nothing received, resend whole request
08:54:45.128 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 3B 00 00 00 00 00 00 00 00 2C D3 46
08:54:45.181 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:45.231 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 159.00, total: 159.00
08:54:45.386 > RX Period End
08:54:45.590 > All missing
08:54:45.651 > Nothing received, resend count exeeded
08:54:45.697 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 3B 00 00 00 00 00 00 00 00 38 C7 52
08:54:45.747 > RX Period End
08:54:45.792 > All missing
08:54:45.916 > Nothing received, resend whole request
08:54:45.963 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 3B 00 00 00 00 00 00 00 00 38 C7 52
08:54:46.012 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:46.112 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 141.00, total: 141.00
08:54:46.165 > RX Period End
08:54:46.226 > All missing
08:54:46.309 > Nothing received, resend whole request
08:54:46.364 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 3B 00 00 00 00 00 00 00 00 38 C7 52
08:54:46.410 > RX Period End
08:54:46.614 > All missing
08:54:46.665 > Nothing received, resend whole request
08:54:46.714 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 3B 00 00 00 00 00 00 00 00 38 C7 52
08:54:46.764 > Fetch inverter: 114184847551
08:54:46.807 > Request SystemConfigPara
08:54:46.884 > Queue size - NRF: 5 CMT: 0
08:54:46.933 > RX Period End
08:54:46.999 > All missing
08:54:47.060 > Nothing received, resend whole request
08:54:47.217 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 3B 00 00 00 00 00 00 00 00 38 C7 52
08:54:47.267 > RX Period End
08:54:47.332 > All missing
08:54:47.434 > Nothing received, resend count exeeded
08:54:47.486 > TX ActivePowerControl (01) Channel: 23 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 B0 00 01 BB C0 BF
08:54:47.554 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:47.653 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 145.00, total: 145.00
08:54:47.697 > Interrupt received
08:54:47.844 > RX Channel: 3 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:54:47.914 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:47.975 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 163.00, total: 163.00
08:54:48.151 > RX Period End
08:54:48.196 > Success
08:54:48.239 > [DPL inverter 114190550241]: actual limit is 43.2 % (346 W respectively), effective 8991 ms after update started, requested were 43.2 %
08:54:48.321 > [DPL] waiting for sufficiently recent inverter data
08:54:48.370 > TX RealTimeRunData Channel: 40 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 40 00 00 00 00 00 00 00 00 04 DE A0
08:54:48.457 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:48.511 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 150.00, total: 150.00
08:54:48.577 > Interrupt received
08:54:48.649 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 D3 01 96 07 60 00 04 00 01 00 00 00 08 BA | -80 dBm
08:54:48.866 > Interrupt received
08:54:48.919 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 02 4A F1 00 08 02 80 00 3A 00 00 08 CE 13 8D 07 06 C5 | -80 dBm
08:54:48.965 > Interrupt received
08:54:49.015 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 50 03 E8 00 84 00 0F EA 10 DE | -80 dBm
08:54:49.276 > RX Period End
08:54:49.365 > Success
08:54:49.409 > [DPL] waiting for sufficiently recent power meter reading
08:54:49.483 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 45 00 00 00 00 00 00 00 00 54 E1 68
08:54:49.689 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:49.791 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 147.00, total: 147.00
08:54:49.891 > RX Period End
08:54:49.993 > All missing
08:54:50.060 > Nothing received, resend whole request
08:54:50.114 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 45 00 00 00 00 00 00 00 00 54 E1 68
08:54:50.175 > RX Period End
08:54:50.231 > All missing
08:54:50.324 > Nothing received, resend whole request
08:54:50.505 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 45 00 00 00 00 00 00 00 00 54 E1 68
08:54:50.577 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:50.652 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 145.00, total: 145.00
08:54:50.703 > RX Period End
08:54:50.813 > All missing
08:54:50.915 > Nothing received, resend whole request
08:54:50.963 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 45 00 00 00 00 00 00 00 00 54 E1 68
08:54:51.018 > Fetch inverter: 114190550241
08:54:51.104 > Queue size - NRF: 3 CMT: 0
08:54:51.153 > RX Period End
08:54:51.202 > All missing
08:54:51.252 > Nothing received, resend whole request
08:54:51.312 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 45 00 00 00 00 00 00 00 00 54 E1 68
08:54:51.381 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:51.428 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 149.00, total: 149.00
08:54:51.491 > [DPL] up 339852 s, NO next inverter restart at 0 s (set to -1)
08:54:51.536 > [DPL] targeting -20 W, base load is 150 W, power meter reads 149.0 W (valid)
08:54:51.587 > [DPL] inverter 114190550241 is behind power meter producing 179 W
08:54:51.652 > [DPL] requesting 348 W from 1 smart-buffer-powered inverter currently producing 179 W (diff 169 W, hysteresis 10 W)
08:54:51.697 > [DPL] will cover 348 W using 1 smart-buffer-powered inverter
08:54:51.744 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:54:51.823 > [DPL inverter 114190550241]:
08:54:51.902 > smart-buffer-powered, producing 179 W
08:54:51.963 > lower/current/upper limit: 50/345/800 W, output capability: 800 W
08:54:52.011 > sending commands enabled, reachable, eligible
08:54:52.161 > max reduction production/standby: 129/179 W, max increase: 455 W
08:54:52.232 > target limit/output/state: 348 W (update)/348 W/production, 0 update timeouts
08:54:52.309 > MPPTs AC power: a: 180 W b: 0 W
08:54:52.451 > [DPL inverter 114190550241]: sending limit of 43.5 % (348 W respectively), max output is 800 W
08:54:52.500 > [DPL] waiting for a start/stop/restart/limit command to complete
08:54:52.655 > RX Period End
08:54:52.758 > All missing
08:54:52.809 > Nothing received, resend count exeeded
08:54:52.856 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 45 00 00 00 00 00 00 00 00 8E FA B3
08:54:52.963 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:53.013 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 148.00, total: 148.00
08:54:53.078 > RX Period End
08:54:53.172 > All missing
08:54:53.240 > Nothing received, resend whole request
08:54:53.327 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 45 00 00 00 00 00 00 00 00 8E FA B3
08:54:53.397 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:53.444 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 166.00, total: 166.00
08:54:53.494 > RX Period End
08:54:53.542 > All missing
08:54:53.589 > Nothing received, resend whole request
08:54:53.655 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 45 00 00 00 00 00 00 00 00 8E FA B3
08:54:53.884 > RX Period End
08:54:53.930 > All missing
08:54:54.090 > Nothing received, resend whole request
08:54:54.142 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 45 00 00 00 00 00 00 00 00 8E FA B3
08:54:54.204 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:54.256 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 145.00, total: 145.00
08:54:54.327 > RX Period End
08:54:54.499 > All missing
08:54:54.601 > Nothing received, resend whole request
08:54:54.656 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 45 00 00 00 00 00 00 00 00 8E FA B3
08:54:54.806 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:54.856 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 144.00, total: 144.00
08:54:55.011 > Fetch inverter: 114184847551
08:54:55.076 > Request SystemConfigPara
08:54:55.119 > Queue size - NRF: 5 CMT: 0
08:54:55.172 > RX Period End
08:54:55.231 > All missing
08:54:55.318 > Nothing received, resend count exeeded
08:54:55.367 > TX RealTimeRunData Channel: 61 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 4A 00 00 00 00 00 00 00 00 A4 A0 74
08:54:55.626 > Interrupt received
08:54:55.669 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 D3 01 8C 07 33 00 04 00 01 00 00 00 08 F3 | -80 dBm
08:54:55.714 > Interrupt received
08:54:55.759 > RX Channel: 61 --> 95 90 55 02 41 90 55 02 41 02 4A F2 00 08 02 80 00 3B 00 00 08 CB 13 8D 06 DA 1F | -80 dBm
08:54:55.806 > Interrupt received
08:54:55.932 > RX Channel: 61 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 4E 03 E8 00 84 00 10 CF 35 DD | -80 dBm
08:54:56.138 > RX Period End
08:54:56.201 > Success
08:54:56.330 > TX ActivePowerControl (01) Channel: 75 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 B3 00 01 BB 30 4C
08:54:56.374 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:56.422 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 157.00, total: 157.00
08:54:56.474 > Interrupt received
08:54:56.649 > RX Channel: 61 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:54:56.751 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:56.803 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 154.00, total: 154.00
08:54:57.189 > RX Period End
08:54:57.247 > Success
08:54:57.293 > [DPL inverter 114190550241]: actual limit is 43.5 % (348 W respectively), effective 7028 ms after update started, requested were 43.5 %
08:54:57.340 > [DPL] waiting for sufficiently recent inverter data
08:54:57.388 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:57.453 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 162.00, total: 162.00
08:54:57.570 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 4F 00 00 00 00 00 00 00 00 F4 9F BC
08:54:57.928 > RX Period End
08:54:57.976 > All missing
08:54:58.027 > Nothing received, resend whole request
08:54:58.103 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 4F 00 00 00 00 00 00 00 00 F4 9F BC
08:54:58.159 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:58.213 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 147.00, total: 147.00
08:54:58.470 > RX Period End
08:54:58.595 > All missing
08:54:58.663 > Nothing received, resend whole request
08:54:58.878 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 4F 00 00 00 00 00 00 00 00 F4 9F BC
08:54:59.010 > RX Period End
08:54:59.062 > All missing
08:54:59.107 > Nothing received, resend whole request
08:54:59.151 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 4F 00 00 00 00 00 00 00 00 F4 9F BC
08:54:59.197 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:54:59.245 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 138.00, total: 138.00
08:54:59.555 > RX Period End
08:54:59.602 > All missing
08:54:59.721 > Nothing received, resend whole request
08:54:59.823 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 4F 00 00 00 00 00 00 00 00 F4 9F BC
08:54:59.926 > Fetch inverter: 114190550241
08:54:59.976 > Queue size - NRF: 4 CMT: 0
08:55:00.053 > RX Period End
08:55:00.114 > All missing
08:55:00.166 > Nothing received, resend count exeeded
08:55:00.213 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 4F 00 00 00 00 00 00 00 00 3A 90 73
08:55:00.261 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:55:00.308 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 157.00, total: 157.00
08:55:00.362 > RX Period End
08:55:00.540 > All missing
08:55:00.599 > Nothing received, resend whole request
08:55:00.658 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 4F 00 00 00 00 00 00 00 00 3A 90 73
08:55:00.704 > RX Period End
08:55:00.847 > All missing
08:55:00.894 > Nothing received, resend whole request
08:55:00.946 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 4F 00 00 00 00 00 00 00 00 3A 90 73
08:55:01.096 > RX Period End
08:55:01.258 > All missing
08:55:01.307 > Nothing received, resend whole request
08:55:01.379 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 4F 00 00 00 00 00 00 00 00 3A 90 73
08:55:01.429 > RX Period End
08:55:01.499 > All missing
08:55:01.666 > Nothing received, resend whole request
08:55:01.770 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 4F 00 00 00 00 00 00 00 00 3A 90 73
08:55:01.890 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:55:01.945 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: 144.00, total: 144.00
08:55:01.988 > RX Period End
08:55:02.079 > All missing
08:55:02.181 > Nothing received, resend count exeeded

0 replies

dk7td · 2025-03-07T07:58:18Z

dk7td
Mar 7, 2025
Author

Und hier das ganze mit aktiver Überskalierung:

RX Period End
08:56:57.116 > All missing
08:56:57.167 > Nothing received, resend whole request
08:56:57.217 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 C8 00 00 00 00 00 00 00 00 02 D8 8A
08:56:57.266 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:56:57.312 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -73.00, total: -73.00
08:56:57.603 > RX Period End
08:56:57.652 > All missing
08:56:57.788 > Nothing received, resend whole request
08:56:57.856 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 C8 00 00 00 00 00 00 00 00 02 D8 8A
08:56:58.106 > RX Period End
08:56:58.167 > All missing
08:56:58.215 > Nothing received, resend count exeeded
08:56:58.328 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:56:58.378 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -77.00, total: -77.00
08:56:58.447 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 C8 00 00 00 00 00 00 00 00 D8 C3 51
08:56:58.502 > [DPL] up 339980 s, NO next inverter restart at 0 s (set to -1)
08:56:58.608 > [DPL] targeting -20 W, base load is 150 W, power meter reads -77.0 W (valid)
08:56:58.874 > [DPL] inverter 114190550241 is behind power meter producing 408 W
08:56:58.939 > [DPL] requesting 351 W from 1 smart-buffer-powered inverter currently producing 408 W (diff -57 W, hysteresis 10 W)
08:56:59.008 > [DPL inverter 114190550241]:
08:56:59.053 > expected AC power per MPPT 200 W
08:56:59.223 > MPPT-a AC power 408 W
08:56:59.322 > MPPT-b AC power 0 W
08:56:59.429 > 1/2 mppts are not-producing/shaded, scaling 1486 W
08:56:59.528 > [DPL] will cover 743 W using 1 smart-buffer-powered inverter
08:56:59.594 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:56:59.751 > [DPL inverter 114190550241]:
08:56:59.795 > smart-buffer-powered, producing 408 W
08:56:59.842 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
08:56:59.902 > sending commands enabled, reachable, eligible
08:57:00.054 > max reduction production/standby: 358/408 W, max increase: 392 W
08:57:00.143 > target limit/output/state: 1486 W (update)/743 W/production, 0 update timeouts
08:57:00.198 > MPPTs AC power: a: 408 W b: 0 W
08:57:00.246 > [DPL inverter 114190550241]: sending limit of 185.8 % (1486 W respectively), max output is 800 W
08:57:00.292 > [DPL] waiting for a start/stop/restart/limit command to complete
08:57:00.358 > RX Period End
08:57:00.450 > All missing
08:57:00.498 > Nothing received, resend whole request
08:57:00.654 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 C8 00 00 00 00 00 00 00 00 D8 C3 51
08:57:00.859 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:00.911 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -97.00, total: -97.00
08:57:00.985 > RX Period End
08:57:01.067 > All missing
08:57:01.186 > Nothing received, resend whole request
08:57:01.230 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 C8 00 00 00 00 00 00 00 00 D8 C3 51
08:57:01.277 > Fetch inverter: 114190550241
08:57:01.328 > Queue size - NRF: 4 CMT: 0
08:57:01.611 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:01.679 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -83.00, total: -83.00
08:57:01.753 > RX Period End
08:57:01.799 > All missing
08:57:01.884 > Nothing received, resend whole request
08:57:01.932 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 C8 00 00 00 00 00 00 00 00 D8 C3 51
08:57:01.978 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:02.093 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -97.00, total: -97.00
08:57:02.192 > RX Period End
08:57:02.263 > All missing
08:57:02.312 > Nothing received, resend whole request
08:57:02.357 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 C8 00 00 00 00 00 00 00 00 D8 C3 51
08:57:02.401 > RX Period End
08:57:02.498 > All missing
08:57:02.606 > Nothing received, resend count exeeded
08:57:02.651 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:02.805 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:02.857 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 C8 00 00 00 00 00 00 00 00 CC D7 45
08:57:03.034 > RX Period End
08:57:03.113 > All missing
08:57:03.168 > Nothing received, resend whole request
08:57:03.214 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 C8 00 00 00 00 00 00 00 00 CC D7 45
08:57:03.282 > RX Period End
08:57:03.415 > All missing
08:57:03.477 > Nothing received, resend whole request
08:57:03.536 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 C8 00 00 00 00 00 00 00 00 CC D7 45
08:57:03.596 > RX Period End
08:57:03.726 > All missing
08:57:03.777 > Nothing received, resend whole request
08:57:03.932 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 C8 00 00 00 00 00 00 00 00 CC D7 45
08:57:03.981 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:04.041 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -76.00, total: -76.00
08:57:04.138 > RX Period End
08:57:04.182 > All missing
08:57:04.250 > Nothing received, resend whole request
08:57:04.296 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 C8 00 00 00 00 00 00 00 00 CC D7 45
08:57:04.547 > RX Period End
08:57:04.651 > All missing
08:57:04.702 > Nothing received, resend count exeeded
08:57:04.749 > TX ActivePowerControl (01) Channel: 75 --> 51 90 55 02 41 80 18 83 32 81 0B 00 03 E8 00 01 D0 40 0E
08:57:04.797 > Interrupt received
08:57:04.956 > RX Channel: 40 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:57:05.005 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:05.059 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:05.103 > Fetch inverter: 114184847551
08:57:05.159 > Request SystemConfigPara
08:57:05.219 > Queue size - NRF: 5 CMT: 0
08:57:05.468 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:05.570 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -80.00, total: -80.00
08:57:05.617 > RX Period End
08:57:05.670 > Success
08:57:05.719 > [DPL inverter 114190550241]: actual limit is 100.0 % (800 W respectively), effective 7213 ms after update started, requested were 185.8 %
08:57:05.772 > [DPL inverter 114190550241]: NOTE: expected limit of 185.8 % and actual limit of 100.0 % mismatch by more than 2 %, is the DPL in exclusive control over the inverter?
08:57:05.819 > [DPL] waiting for sufficiently recent inverter data
08:57:05.868 > TX RealTimeRunData Channel: 3 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 CD 00 00 00 00 00 00 00 00 52 E7 42
08:57:06.082 > Interrupt received
08:57:06.136 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 C3 03 BA 10 BE 00 05 00 01 00 00 00 08 4C | -80 dBm
08:57:06.184 > Interrupt received
08:57:06.250 > RX Channel: 61 --> 95 90 55 02 41 90 55 02 41 02 4A FB 00 08 02 80 00 44 00 00 08 E5 13 89 0F F0 60 | -80 dBm
08:57:06.301 > Interrupt received
08:57:06.352 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 03 00 B3 03 E8 00 87 00 12 6B 76 C5 | -80 dBm
08:57:06.492 > RX Period End
08:57:06.538 > Success
08:57:06.599 > [DPL] waiting for sufficiently recent power meter reading
08:57:06.656 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 D2 00 00 00 00 00 00 00 00 62 6B 43
08:57:06.701 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:06.753 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -74.00, total: -74.00
08:57:06.803 > RX Period End
08:57:06.855 > All missing
08:57:06.903 > Nothing received, resend whole request
08:57:06.959 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 D2 00 00 00 00 00 00 00 00 62 6B 43
08:57:07.134 > RX Period End
08:57:07.187 > All missing
08:57:07.238 > Nothing received, resend whole request
08:57:07.285 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 D2 00 00 00 00 00 00 00 00 62 6B 43
08:57:07.349 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:07.402 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -79.00, total: -79.00
08:57:07.675 > RX Period End
08:57:07.719 > All missing
08:57:07.769 > Nothing received, resend whole request
08:57:07.819 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 D2 00 00 00 00 00 00 00 00 62 6B 43
08:57:08.223 > RX Period End
08:57:08.269 > All missing
08:57:08.319 > Nothing received, resend whole request
08:57:08.370 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 D2 00 00 00 00 00 00 00 00 62 6B 43
08:57:08.417 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:08.470 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:08.518 > [DPL] up 339990 s, NO next inverter restart at 0 s (set to -1)
08:57:08.643 > [DPL] targeting -20 W, base load is 150 W, power meter reads -82.0 W (valid)
08:57:08.870 > [DPL] inverter 114190550241 is behind power meter producing 408 W
08:57:08.918 > [DPL] requesting 346 W from 1 smart-buffer-powered inverter currently producing 408 W (diff -62 W, hysteresis 10 W)
08:57:08.998 > [DPL inverter 114190550241]:
08:57:09.058 > expected AC power per MPPT 200 W
08:57:09.104 > MPPT-a AC power 408 W
08:57:09.152 > MPPT-b AC power 0 W
08:57:09.205 > 1/2 mppts are not-producing/shaded, scaling 1476 W
08:57:09.359 > [DPL] will cover 738 W using 1 smart-buffer-powered inverter
08:57:09.462 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:57:09.519 > [DPL inverter 114190550241]:
08:57:09.665 > smart-buffer-powered, producing 408 W
08:57:09.724 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
08:57:09.878 > sending commands enabled, reachable, eligible
08:57:10.076 > max reduction production/standby: 358/408 W, max increase: 392 W
08:57:10.177 > target limit/output/state: 1476 W (update)/738 W/production, 0 update timeouts
08:57:10.225 > MPPTs AC power: a: 408 W b: 0 W
08:57:10.485 > [DPL inverter 114190550241]: sending limit of 184.5 % (1476 W respectively), max output is 800 W
08:57:10.604 > [DPL] waiting for a start/stop/restart/limit command to complete
08:57:10.651 > RX Period End
08:57:10.697 > All missing
08:57:10.755 > Nothing received, resend count exeeded
08:57:10.894 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 D2 00 00 00 00 00 00 00 00 B8 70 98
08:57:11.001 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:11.051 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -77.00, total: -77.00
08:57:11.101 > RX Period End
08:57:11.161 > All missing
08:57:11.222 > Nothing received, resend whole request
08:57:11.267 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 D2 00 00 00 00 00 00 00 00 B8 70 98
08:57:11.315 > Fetch inverter: 114190550241
08:57:11.363 > Queue size - NRF: 4 CMT: 0
08:57:11.414 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:11.463 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -83.00, total: -83.00
08:57:11.611 > RX Period End
08:57:11.715 > All missing
08:57:11.766 > Nothing received, resend whole request
08:57:11.815 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 D2 00 00 00 00 00 00 00 00 B8 70 98
08:57:11.920 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:11.966 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -91.00, total: -91.00
08:57:12.124 > RX Period End
08:57:12.185 > All missing
08:57:12.258 > Nothing received, resend whole request
08:57:12.330 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 D2 00 00 00 00 00 00 00 00 B8 70 98
08:57:12.385 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:12.435 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -81.00, total: -81.00
08:57:12.483 > RX Period End
08:57:12.540 > All missing
08:57:12.605 > Nothing received, resend whole request
08:57:12.653 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 D2 00 00 00 00 00 00 00 00 B8 70 98
08:57:12.994 > RX Period End
08:57:13.051 > All missing
08:57:13.116 > Nothing received, resend count exeeded
08:57:13.168 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 D2 00 00 00 00 00 00 00 00 AC 64 8C
08:57:13.221 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:13.268 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:13.318 > RX Period End
08:57:13.367 > All missing
08:57:13.418 > Nothing received, resend whole request
08:57:13.473 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 D2 00 00 00 00 00 00 00 00 AC 64 8C
08:57:13.558 > RX Period End
08:57:13.659 > All missing
08:57:13.766 > Nothing received, resend whole request
08:57:13.830 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 D2 00 00 00 00 00 00 00 00 AC 64 8C
08:57:13.969 > RX Period End
08:57:14.025 > All missing
08:57:14.179 > Nothing received, resend whole request
08:57:14.233 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 D2 00 00 00 00 00 00 00 00 AC 64 8C
08:57:14.289 > RX Period End
08:57:14.352 > All missing
08:57:14.400 > Nothing received, resend whole request
08:57:14.469 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 D2 00 00 00 00 00 00 00 00 AC 64 8C
08:57:14.514 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:14.566 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -80.00, total: -80.00
08:57:14.617 > RX Period End
08:57:14.667 > All missing
08:57:14.718 > Nothing received, resend count exeeded
08:57:14.773 > TX ActivePowerControl (01) Channel: 23 --> 51 90 55 02 41 80 18 83 32 81 0B 00 03 E8 00 01 D0 40 0E
08:57:14.834 > Interrupt received
08:57:15.011 > RX Channel: 75 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:57:15.195 > Fetch inverter: 114184847551
08:57:15.249 > Request SystemConfigPara
08:57:15.299 > Queue size - NRF: 5 CMT: 0
08:57:15.445 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:15.605 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -70.00, total: -70.00
08:57:16.240 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:16.339 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -65.00, total: -65.00
08:57:16.430 > RX Period End
08:57:16.480 > Success
08:57:16.526 > [DPL inverter 114190550241]: actual limit is 100.0 % (800 W respectively), effective 8127 ms after update started, requested were 184.5 %
08:57:16.606 > [DPL inverter 114190550241]: NOTE: expected limit of 184.5 % and actual limit of 100.0 % mismatch by more than 2 %, is the DPL in exclusive control over the inverter?
08:57:16.734 > [DPL] waiting for sufficiently recent inverter data
08:57:16.781 > TX RealTimeRunData Channel: 40 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 D7 00 00 00 00 00 00 00 00 32 54 8B
08:57:16.940 > Interrupt received
08:57:17.004 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 C3 03 BA 10 BE 00 05 00 01 00 00 00 08 4C | -80 dBm
08:57:17.140 > Interrupt received
08:57:17.209 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 02 4A FC 00 08 02 80 00 45 00 00 08 EA 13 8A 0F F0 6A | -80 dBm
08:57:17.259 > Interrupt received
08:57:17.313 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 03 00 B3 03 E8 00 88 00 12 3D 9B 71 | -80 dBm
08:57:17.359 > RX Period End
08:57:17.437 > Success
08:57:17.554 > [DPL] waiting for sufficiently recent power meter reading
08:57:17.607 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 DC 00 00 00 00 00 00 00 00 02 27 61
08:57:17.699 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:17.762 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -66.00, total: -66.00
08:57:17.809 > RX Period End
08:57:17.959 > All missing
08:57:18.025 > Nothing received, resend whole request
08:57:18.165 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 DC 00 00 00 00 00 00 00 00 02 27 61
08:57:18.212 > RX Period End
08:57:18.263 > All missing
08:57:18.311 > Nothing received, resend whole request
08:57:18.359 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 DC 00 00 00 00 00 00 00 00 02 27 61
08:57:18.416 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:18.462 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:18.550 > RX Period End
08:57:18.609 > All missing
08:57:18.870 > Nothing received, resend whole request
08:57:18.999 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 DC 00 00 00 00 00 00 00 00 02 27 61
08:57:19.092 > RX Period End
08:57:19.139 > All missing
08:57:19.195 > Nothing received, resend whole request
08:57:19.261 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 DC 00 00 00 00 00 00 00 00 02 27 61
08:57:19.310 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:19.367 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -84.00, total: -84.00
08:57:19.439 > [DPL] up 340001 s, NO next inverter restart at 0 s (set to -1)
08:57:19.499 > [DPL] targeting -20 W, base load is 150 W, power meter reads -84.0 W (valid)
08:57:19.564 > [DPL] inverter 114190550241 is behind power meter producing 408 W
08:57:19.612 > [DPL] requesting 344 W from 1 smart-buffer-powered inverter currently producing 408 W (diff -64 W, hysteresis 10 W)
08:57:19.671 > [DPL inverter 114190550241]:
08:57:19.730 > expected AC power per MPPT 200 W
08:57:19.790 > MPPT-a AC power 408 W
08:57:19.905 > MPPT-b AC power 0 W
08:57:20.007 > 1/2 mppts are not-producing/shaded, scaling 1472 W
08:57:20.064 > [DPL] will cover 736 W using 1 smart-buffer-powered inverter
08:57:20.111 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:57:20.174 > [DPL inverter 114190550241]:
08:57:20.229 > smart-buffer-powered, producing 408 W
08:57:20.279 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
08:57:20.329 > sending commands enabled, reachable, eligible
08:57:20.382 > max reduction production/standby: 358/408 W, max increase: 392 W
08:57:20.433 > target limit/output/state: 1472 W (update)/736 W/production, 0 update timeouts
08:57:20.482 > MPPTs AC power: a: 408 W b: 0 W
08:57:20.531 > [DPL inverter 114190550241]: sending limit of 184.0 % (1472 W respectively), max output is 800 W
08:57:20.574 > [DPL] waiting for a start/stop/restart/limit command to complete
08:57:20.634 > RX Period End
08:57:20.724 > All missing
08:57:20.774 > Nothing received, resend count exeeded
08:57:20.928 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 DC 00 00 00 00 00 00 00 00 D8 3C BA
08:57:20.995 > Fetch inverter: 114190550241
08:57:21.065 > Queue size - NRF: 4 CMT: 0
08:57:21.113 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:21.164 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:21.213 > RX Period End
08:57:21.341 > All missing
08:57:21.442 > Nothing received, resend whole request
08:57:21.646 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 DC 00 00 00 00 00 00 00 00 D8 3C BA
08:57:21.852 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:21.900 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -66.00, total: -66.00
08:57:21.951 > RX Period End
08:57:22.002 > All missing
08:57:22.059 > Nothing received, resend whole request
08:57:22.159 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 DC 00 00 00 00 00 00 00 00 D8 3C BA
08:57:22.221 > RX Period End
08:57:22.268 > All missing
08:57:22.319 > Nothing received, resend whole request
08:57:22.389 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 DC 00 00 00 00 00 00 00 00 D8 3C BA
08:57:22.434 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:22.486 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:22.926 > RX Period End
08:57:23.080 > All missing
08:57:23.183 > Nothing received, resend whole request
08:57:23.236 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 DC 00 00 00 00 00 00 00 00 D8 3C BA
08:57:23.285 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:23.335 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:23.682 > RX Period End
08:57:23.798 > All missing
08:57:23.899 > Nothing received, resend count exeeded
08:57:23.952 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 DC 00 00 00 00 00 00 00 00 CC 28 AE
08:57:24.005 > RX Period End
08:57:24.054 > All missing
08:57:24.104 > Nothing received, resend whole request
08:57:24.151 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 DC 00 00 00 00 00 00 00 00 CC 28 AE
08:57:24.204 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:24.271 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:24.318 > RX Period End
08:57:24.412 > All missing
08:57:24.462 > Nothing received, resend whole request
08:57:24.617 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 DC 00 00 00 00 00 00 00 00 CC 28 AE
08:57:24.719 > RX Period End
08:57:24.768 > All missing
08:57:24.818 > Nothing received, resend whole request
08:57:24.885 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 DC 00 00 00 00 00 00 00 00 CC 28 AE
08:57:24.938 > RX Period End
08:57:25.019 > All missing
08:57:25.128 > Nothing received, resend whole request
08:57:25.185 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 DC 00 00 00 00 00 00 00 00 CC 28 AE
08:57:25.244 > RX Period End
08:57:25.333 > All missing
08:57:25.384 > Nothing received, resend count exeeded
08:57:25.538 > TX ActivePowerControl (01) Channel: 61 --> 51 90 55 02 41 80 18 83 32 81 0B 00 03 E8 00 01 D0 40 0E
08:57:25.584 > Fetch inverter: 114184847551
08:57:25.743 > Request SystemConfigPara
08:57:25.947 > Queue size - NRF: 5 CMT: 0
08:57:25.998 > Interrupt received
08:57:26.041 > RX Channel: 75 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:57:26.095 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:26.276 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -76.00, total: -76.00
08:57:26.323 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:26.369 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:26.997 > RX Period End
08:57:27.041 > Success
08:57:27.087 > [DPL inverter 114190550241]: actual limit is 100.0 % (800 W respectively), effective 7832 ms after update started, requested were 184.0 %
08:57:27.135 > [DPL inverter 114190550241]: NOTE: expected limit of 184.0 % and actual limit of 100.0 % mismatch by more than 2 %, is the DPL in exclusive control over the inverter?
08:57:27.182 > [DPL] waiting for sufficiently recent inverter data
08:57:27.244 > TX RealTimeRunData Channel: 75 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 E1 00 00 00 00 00 00 00 00 93 2B 63
08:57:27.293 > Interrupt received
08:57:27.400 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 02 4A FE 00 08 02 80 00 47 00 00 08 E8 13 8A 0F F0 68 | -80 dBm
08:57:27.448 > Interrupt received
08:57:27.495 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 B3 03 E8 00 88 00 12 6A D7 69 | -80 dBm
08:57:27.541 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:27.615 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -89.00, total: -89.00
08:57:27.688 > RX Period End
08:57:27.734 > Middle missing
08:57:27.781 > Request retransmit: 1
08:57:27.839 > TX RequestFrame Channel: 3 --> 15 90 55 02 41 80 18 83 32 81 3B
08:57:27.882 > Interrupt received
08:57:27.939 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 C2 03 BA 10 BE 00 05 00 01 00 00 00 08 4D | -80 dBm
08:57:28.097 > RX Period End
08:57:28.150 > Success
08:57:28.198 > [DPL] waiting for sufficiently recent power meter reading
08:57:28.248 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 E6 00 00 00 00 00 00 00 00 A3 0D D0
08:57:28.292 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:28.337 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -79.00, total: -79.00
08:57:28.383 > RX Period End
08:57:28.430 > All missing
08:57:28.480 > Nothing received, resend whole request
08:57:28.532 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 E6 00 00 00 00 00 00 00 00 A3 0D D0
08:57:28.912 > RX Period End
08:57:28.963 > All missing
08:57:29.068 > Nothing received, resend whole request
08:57:29.122 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 E6 00 00 00 00 00 00 00 00 A3 0D D0
08:57:29.168 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:29.213 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -84.00, total: -84.00
08:57:29.451 > RX Period End
08:57:29.494 > All missing
08:57:29.634 > Nothing received, resend whole request
08:57:29.685 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 E6 00 00 00 00 00 00 00 00 A3 0D D0
08:57:29.991 > RX Period End
08:57:30.035 > All missing
08:57:30.146 > Nothing received, resend whole request
08:57:30.201 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 E6 00 00 00 00 00 00 00 00 A3 0D D0
08:57:30.278 > Fetch inverter: 114190550241
08:57:30.351 > Queue size - NRF: 4 CMT: 0
08:57:30.421 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:30.477 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -83.00, total: -83.00
08:57:30.530 > [DPL] up 340012 s, NO next inverter restart at 0 s (set to -1)
08:57:30.579 > [DPL] targeting -20 W, base load is 150 W, power meter reads -83.0 W (valid)
08:57:30.638 > [DPL] inverter 114190550241 is behind power meter producing 408 W
08:57:30.682 > [DPL] requesting 345 W from 1 smart-buffer-powered inverter currently producing 408 W (diff -63 W, hysteresis 10 W)
08:57:30.729 > [DPL inverter 114190550241]:
08:57:30.778 > expected AC power per MPPT 200 W
08:57:30.832 > MPPT-a AC power 408 W
08:57:30.877 > MPPT-b AC power 0 W
08:57:30.923 > 1/2 mppts are not-producing/shaded, scaling 1474 W
08:57:31.085 > [DPL] will cover 737 W using 1 smart-buffer-powered inverter
08:57:31.136 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:57:31.181 > [DPL inverter 114190550241]:
08:57:31.225 > smart-buffer-powered, producing 408 W
08:57:31.269 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
08:57:31.373 > sending commands enabled, reachable, eligible
08:57:31.427 > max reduction production/standby: 358/408 W, max increase: 392 W
08:57:31.477 > target limit/output/state: 1474 W (update)/737 W/production, 0 update timeouts
08:57:31.527 > MPPTs AC power: a: 408 W b: 0 W
08:57:31.682 > [DPL inverter 114190550241]: sending limit of 184.2 % (1474 W respectively), max output is 800 W
08:57:31.729 > [DPL] waiting for a start/stop/restart/limit command to complete
08:57:31.776 > RX Period End
08:57:31.887 > All missing
08:57:31.934 > Nothing received, resend count exeeded
08:57:32.091 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 E6 00 00 00 00 00 00 00 00 79 16 0B
08:57:32.195 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:32.254 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:32.307 > RX Period End
08:57:32.360 > All missing
08:57:32.443 > Nothing received, resend whole request
08:57:32.496 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 E6 00 00 00 00 00 00 00 00 79 16 0B
08:57:32.729 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:32.783 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:32.829 > RX Period End
08:57:32.876 > All missing
08:57:32.920 > Nothing received, resend whole request
08:57:32.982 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 E6 00 00 00 00 00 00 00 00 79 16 0B
08:57:33.058 > RX Period End
08:57:33.104 > All missing
08:57:33.162 > Nothing received, resend whole request
08:57:33.221 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 E6 00 00 00 00 00 00 00 00 79 16 0B
08:57:33.267 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:33.525 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -87.00, total: -87.00
08:57:33.848 > RX Period End
08:57:33.934 > All missing
08:57:33.983 > Nothing received, resend whole request
08:57:34.140 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 E6 00 00 00 00 00 00 00 00 79 16 0B
08:57:34.191 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:34.247 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -82.00, total: -82.00
08:57:34.601 > RX Period End
08:57:34.651 > All missing
08:57:34.776 > Nothing received, resend count exeeded
08:57:34.855 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 E6 00 00 00 00 00 00 00 00 6D 02 1F
08:57:34.905 > RX Period End
08:57:35.061 > All missing
08:57:35.164 > Nothing received, resend whole request
08:57:35.225 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 E6 00 00 00 00 00 00 00 00 6D 02 1F
08:57:35.271 > Fetch inverter: 114184847551
08:57:35.369 > Request SystemConfigPara
08:57:35.421 > Queue size - NRF: 5 CMT: 0
08:57:35.474 > RX Period End
08:57:35.527 > All missing
08:57:35.573 > Nothing received, resend whole request
08:57:35.638 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 E6 00 00 00 00 00 00 00 00 6D 02 1F
08:57:35.683 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:35.779 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:35.834 > RX Period End
08:57:35.894 > All missing
08:57:35.942 > Nothing received, resend whole request
08:57:36.085 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 E6 00 00 00 00 00 00 00 00 6D 02 1F
08:57:36.188 > RX Period End
08:57:36.240 > All missing
08:57:36.293 > Nothing received, resend whole request
08:57:36.342 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 E6 00 00 00 00 00 00 00 00 6D 02 1F
08:57:36.390 > RX Period End
08:57:36.444 > All missing
08:57:36.510 > Nothing received, resend count exeeded
08:57:36.557 > TX RealTimeRunData Channel: 23 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 EB 00 00 00 00 00 00 00 00 33 55 B7
08:57:36.623 > Interrupt received
08:57:36.666 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 C2 03 BB 10 BE 00 05 00 01 00 00 00 08 4C | -80 dBm
08:57:36.905 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:37.016 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -79.00, total: -79.00
08:57:37.124 > RX Period End
08:57:37.175 > Last missing
08:57:37.230 > Request retransmit: 2
08:57:37.314 > TX RequestFrame Channel: 40 --> 15 90 55 02 41 80 18 83 32 82 38
08:57:37.360 > Interrupt received
08:57:37.414 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 02 4A FF 00 08 02 80 00 48 00 00 08 E9 13 8A 0F F0 67 | -80 dBm
08:57:37.461 > RX Period End
08:57:37.529 > Last missing
08:57:37.572 > Request retransmit: 3
08:57:37.928 > TX RequestFrame Channel: 61 --> 15 90 55 02 41 80 18 83 32 83 39
08:57:38.030 > Interrupt received
08:57:38.078 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 83 00 03 00 B3 03 E8 00 88 00 12 E6 1D 2C | -80 dBm
08:57:38.153 > RX Period End
08:57:38.213 > Success
08:57:38.263 > TX ActivePowerControl (01) Channel: 75 --> 51 90 55 02 41 80 18 83 32 81 0B 00 03 E8 00 01 D0 40 0E
08:57:38.310 > Interrupt received
08:57:38.359 > RX Channel: 75 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
08:57:38.410 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:38.463 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -91.00, total: -91.00
08:57:38.512 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:38.645 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -76.00, total: -76.00
08:57:38.884 > RX Period End
08:57:38.952 > Success
08:57:39.017 > [DPL inverter 114190550241]: actual limit is 100.0 % (800 W respectively), effective 8485 ms after update started, requested were 184.2 %
08:57:39.079 > [DPL inverter 114190550241]: NOTE: expected limit of 184.2 % and actual limit of 100.0 % mismatch by more than 2 %, is the DPL in exclusive control over the inverter?
08:57:39.175 > [DPL] waiting for sufficiently recent inverter data
08:57:39.231 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 F0 00 00 00 00 00 00 00 00 C3 EB 40
08:57:39.278 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:39.330 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:39.445 > RX Period End
08:57:39.494 > All missing
08:57:39.548 > Nothing received, resend whole request
08:57:39.878 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 F0 00 00 00 00 00 00 00 00 C3 EB 40
08:57:39.988 > RX Period End
08:57:40.053 > All missing
08:57:40.110 > Nothing received, resend whole request
08:57:40.173 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 F0 00 00 00 00 00 00 00 00 C3 EB 40
08:57:40.229 > Fetch inverter: 114190550241
08:57:40.309 > Queue size - NRF: 3 CMT: 0
08:57:40.361 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:40.487 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:40.541 > RX Period End
08:57:40.588 > All missing
08:57:40.639 > Nothing received, resend whole request
08:57:40.682 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 F0 00 00 00 00 00 00 00 00 C3 EB 40
08:57:41.070 > RX Period End
08:57:41.119 > All missing
08:57:41.166 > Nothing received, resend whole request
08:57:41.212 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 F0 00 00 00 00 00 00 00 00 C3 EB 40
08:57:41.261 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:41.325 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -80.00, total: -80.00
08:57:41.575 > RX Period End
08:57:41.637 > All missing
08:57:41.706 > Nothing received, resend count exeeded
08:57:41.781 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 F0 00 00 00 00 00 00 00 00 19 F0 9B
08:57:42.440 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:42.539 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -80.00, total: -80.00
08:57:42.739 > RX Period End
08:57:43.214 > All missing
08:57:43.265 > Nothing received, resend whole request
08:57:43.310 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 F0 00 00 00 00 00 00 00 00 19 F0 9B
08:57:43.458 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:43.509 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -84.00, total: -84.00
08:57:43.661 > RX Period End
08:57:43.783 > All missing
08:57:43.827 > Nothing received, resend whole request
08:57:44.211 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 F0 00 00 00 00 00 00 00 00 19 F0 9B
08:57:44.273 > RX Period End
08:57:44.332 > All missing
08:57:44.385 > Nothing received, resend whole request
08:57:44.432 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 F0 00 00 00 00 00 00 00 00 19 F0 9B
08:57:44.477 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:45.210 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -85.00, total: -85.00
08:57:45.262 > RX Period End
08:57:45.308 > All missing
08:57:45.357 > Nothing received, resend whole request
08:57:45.463 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 CA A6 F0 00 00 00 00 00 00 00 00 19 F0 9B
08:57:45.508 > Fetch inverter: 114184847551
08:57:45.558 > Request SystemConfigPara
08:57:45.629 > Queue size - NRF: 4 CMT: 0
08:57:45.673 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:45.815 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:45.875 > RX Period End
08:57:45.922 > All missing
08:57:45.975 > Nothing received, resend count exeeded
08:57:46.129 > TX RealTimeRunData Channel: 3 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 CA A6 F5 00 00 00 00 00 00 00 00 93 D4 88
08:57:46.198 > Interrupt received
08:57:46.241 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 C2 03 BB 10 BE 00 05 00 01 00 00 00 08 4C | -80 dBm
08:57:46.429 > Interrupt received
08:57:46.474 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 02 4B 00 00 08 02 80 00 49 00 00 08 ED 13 8A 0F F0 9C | -80 dBm
08:57:46.524 > Interrupt received
08:57:46.576 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 B3 03 E8 00 89 00 12 32 9F 78 | -80 dBm
08:57:47.415 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:47.758 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -81.00, total: -81.00
08:57:47.807 > RX Period End
08:57:47.856 > Success
08:57:47.906 > [DPL] waiting for sufficiently recent power meter reading
08:57:48.065 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 FA 00 00 00 00 00 00 00 00 63 95 94
08:57:48.168 > RX Period End
08:57:48.215 > All missing
08:57:48.376 > Nothing received, resend whole request
08:57:48.424 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 FA 00 00 00 00 00 00 00 00 63 95 94
08:57:48.474 > RX Period End
08:57:48.523 > All missing
08:57:48.573 > Nothing received, resend whole request
08:57:48.633 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 FA 00 00 00 00 00 00 00 00 63 95 94
08:57:48.866 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:48.919 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -88.00, total: -88.00
08:57:48.965 > RX Period End
08:57:49.056 > All missing
08:57:49.101 > Nothing received, resend whole request
08:57:49.160 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 FA 00 00 00 00 00 00 00 00 63 95 94
08:57:49.222 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:49.268 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -80.00, total: -80.00
08:57:49.396 > [DPL] up 340030 s, NO next inverter restart at 0 s (set to -1)
08:57:49.518 > [DPL] targeting -20 W, base load is 150 W, power meter reads -80.0 W (valid)
08:57:49.572 > [DPL] inverter 114190550241 is behind power meter producing 408 W
08:57:49.630 > [DPL] requesting 348 W from 1 smart-buffer-powered inverter currently producing 408 W (diff -60 W, hysteresis 10 W)
08:57:49.684 > [DPL inverter 114190550241]:
08:57:49.735 > expected AC power per MPPT 200 W
08:57:49.806 > MPPT-a AC power 408 W
08:57:49.854 > MPPT-b AC power 0 W
08:57:50.012 > 1/2 mppts are not-producing/shaded, scaling 1480 W
08:57:50.081 > [DPL] will cover 740 W using 1 smart-buffer-powered inverter
08:57:50.216 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
08:57:50.264 > [DPL inverter 114190550241]:
08:57:50.325 > smart-buffer-powered, producing 408 W
08:57:50.377 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
08:57:50.424 > sending commands enabled, reachable, eligible
08:57:50.491 > max reduction production/standby: 358/408 W, max increase: 392 W
08:57:50.625 > target limit/output/state: 1480 W (update)/740 W/production, 0 update timeouts
08:57:50.727 > MPPTs AC power: a: 408 W b: 0 W
08:57:50.783 > [DPL inverter 114190550241]: sending limit of 185.0 % (1480 W respectively), max output is 800 W
08:57:50.831 > [DPL] waiting for a start/stop/restart/limit command to complete
08:57:50.948 > RX Period End
08:57:51.004 > All missing
08:57:51.057 > Nothing received, resend whole request
08:57:51.138 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 CA A6 FA 00 00 00 00 00 00 00 00 63 95 94
08:57:51.226 > RX Period End
08:57:51.342 > All missing
08:57:51.394 > Nothing received, resend count exeeded
08:57:51.546 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 FA 00 00 00 00 00 00 00 00 AD 9A 5B
08:57:51.649 > Received MQTT message on topic: vzlogger/data/chn2/raw
08:57:51.697 > [PowerMeterMqtt] Topic 'vzlogger/data/chn2/raw': new value: -86.00, total: -86.00
08:57:51.747 > RX Period End
08:57:51.803 > All missing
08:57:52.108 > Nothing received, resend whole request
08:57:52.151 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 FA 00 00 00 00 00 00 00 00 AD 9A 5B
08:57:52.207 > RX Period End
08:57:52.378 > All missing
08:57:52.428 > Nothing received, resend whole request
08:57:52.472 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 FA 00 00 00 00 00 00 00 00 AD 9A 5B
08:57:52.527 > RX Period End
08:57:52.573 > All missing
08:57:52.637 > Nothing received, resend whole request
08:57:52.683 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 FA 00 00 00 00 00 00 00 00 AD 9A 5B
08:57:52.740 > RX Period End
08:57:52.878 > All missing
08:57:52.943 > Nothing received, resend whole request
08:57:53.003 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 CA A6 FA 00 00 00 00 00 00 00 00 AD 9A 5B
08:57:53.054 > Fetch inverter: 114190550241
08:57:53.107 > Queue size - NRF: 3 CMT: 0

0 replies

AndreasBoehm · 2025-03-07T08:06:58Z

AndreasBoehm
Mar 7, 2025
Maintainer

Danke für die Logs. Da läuft was richtig schief! Schau ich mir bei zeiten im code an.

15 replies

Zen-Samko Mar 8, 2025

Diese Schwinger sind mit der gefixten Version sind bei mir gerade etwas anders, bei konstanten 300W wird 35 W aus dem Netz gekauft, leider länger so dass es nervig ist.
werde wohl wieder zur aktuellen Version wechseln und ohne Verschattungs Option leben.

LG

Zen-Samko Mar 8, 2025

Habe die Verschattungs Option wieder aktiviert und auf Schwellwert 50 gestellt.
Auf einmal wird normal geregelt, mal schauen was passiert.

LG

Zen-Samko Mar 9, 2025

Kurze Info,
habe diesen Schwellwert auf Standard 98 belassen und getestet, es funktioniert.
Gerade kam ein Akku auf die untere Entladegrenze und ging in den Standby, war dann schön zu sehen wie DPL mehr angefordert hat.

LG

dk7td Mar 10, 2025
Author

Danke. Mir ist da was eingefallen, das Problem hab ich in einer Test Version schon behoben: https://github.com/hoylabs/OpenDTU-OnBattery/actions/runs/13462326933

Moin!
Diese Version läuft bei mir seit einigen Tagen einwandfrei! Ist abzusehen, daß diese Änderung in den Master Branch einfließen wird?
Danke!

schlimmchen Mar 10, 2025
Maintainer

Diese Anpassung ist schon im development Branch und wird auch im nächsten Release veröffentlicht werden.

Uh oh!

Überskalierung bei zwei Smart-Battery-Speichern? #1705

Uh oh!

Replies: 5 comments · 20 replies

Uh oh!

Uh oh!

dk7td Mar 6, 2025 Author

Uh oh!

AndreasBoehm Mar 6, 2025 Maintainer

Uh oh!

Uh oh!

Uh oh!

Uh oh!

dk7td Mar 7, 2025 Author

Uh oh!

Uh oh!

dk7td Mar 7, 2025 Author

Uh oh!

dk7td Mar 7, 2025 Author

Uh oh!

AndreasBoehm Mar 7, 2025 Maintainer

Uh oh!

Uh oh!

Uh oh!

Uh oh!

dk7td Mar 10, 2025 Author

Uh oh!

schlimmchen Mar 10, 2025 Maintainer

Replies: 5 comments 20 replies

dk7td Mar 6, 2025
Author

AndreasBoehm Mar 6, 2025
Maintainer

dk7td Mar 7, 2025
Author

dk7td
Mar 7, 2025
Author

dk7td
Mar 7, 2025
Author

AndreasBoehm
Mar 7, 2025
Maintainer

dk7td Mar 10, 2025
Author

schlimmchen Mar 10, 2025
Maintainer