Correct minor DRC and net labelling from merge

Author: artursilva0

PCB/harp analog input v1.0.brd

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="9.5.1">
+<eagle version="9.6.2">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
@@ -4867,117 +4867,87 @@ new: Attribute TP_SIGNAL_NAME&lt;br&gt;
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="eC_2Layer_PClass6_BaseCopperO18_eCDefault *">
-<description language="de">
-
-&lt;p&gt;
-&lt;b&gt;Eurocircuits-EAGLE design rules&lt;/b&gt;&lt;br&gt;
-&lt;br&gt;
-Setup for &lt;b&gt;2-layer PatternClass6 BaseCopperO18 eCDefault&lt;/b&gt;
-&lt;p&gt;
- The option &lt;b&gt;Sizes-Minimum Drill&lt;/b&gt; is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview.
-&lt;p&gt;
-&lt;u&gt;Extra Notes:&lt;/u&gt;&lt;br&gt;
-- The option &lt;b&gt;Distance-Copper/Dimension&lt;/b&gt; is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.&lt;br&gt;
-- The option &lt;b&gt;Supply-Generate thermals for vias&lt;/b&gt; is on by default but may be changed if required.&lt;br&gt;
-- The option &lt;b&gt;Mask-Stop&lt;/b&gt; is set to 0mm oversize which is the preffered value.&lt;br&gt;
-- The option &lt;b&gt;Mask-Cream&lt;/b&gt; is set to 0mm oversize by default, but may be changed if required&lt;br&gt;
-- The option &lt;b&gt;Mask-Limit&lt;/b&gt; is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.&lt;br&gt;
-- The options &lt;b&gt;Shapes&lt;/b&gt; and &lt;b&gt;Misc&lt;/b&gt; are not relevant. Values for &lt;b&gt;Shapes-Smds-Roundness&lt;/b&gt; are not critical and can be set as you require.
-&lt;p&gt;
-&lt;p&gt;
-You can set higher minimum values if you wish, setting lower minimum values is &lt;u&gt;not advisable&lt;/u&gt;.&lt;br&gt;
-If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table.
-&lt;p&gt;
-Your Eurocircuits Team
-</description>
-<description language="en">
-
-&lt;p&gt;
-&lt;b&gt;Eurocircuits-EAGLE design rules&lt;/b&gt;&lt;br&gt;
-&lt;br&gt;
-Setup for &lt;b&gt;2-layer PatternClass6 BaseCopperO18 eCDefault&lt;/b&gt;
-&lt;p&gt;
- The option &lt;b&gt;Sizes-Minimum Drill&lt;/b&gt; is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview.
-&lt;p&gt;
-&lt;u&gt;Extra Notes:&lt;/u&gt;&lt;br&gt;
-- The option &lt;b&gt;Distance-Copper/Dimension&lt;/b&gt; is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.&lt;br&gt;
-- The option &lt;b&gt;Supply-Generate thermals for vias&lt;/b&gt; is on by default but may be changed if required.&lt;br&gt;
-- The option &lt;b&gt;Mask-Stop&lt;/b&gt; is set to 0mm oversize which is the preffered value.&lt;br&gt;
-- The option &lt;b&gt;Mask-Cream&lt;/b&gt; is set to 0mm oversize by default, but may be changed if required&lt;br&gt;
-- The option &lt;b&gt;Mask-Limit&lt;/b&gt; is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.&lt;br&gt;
-- The options &lt;b&gt;Shapes&lt;/b&gt; and &lt;b&gt;Misc&lt;/b&gt; are not relevant. Values for &lt;b&gt;Shapes-Smds-Roundness&lt;/b&gt; are not critical and can be set as you require.
-&lt;p&gt;
+<designrules name="SeeedStudio_2layer_DRU_no_angle_20140221 *">
+<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
-You can set higher minimum values if you wish, setting lower minimum values is &lt;u&gt;not advisable&lt;/u&gt;.&lt;br&gt;
-If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table.
+Die Standard-Design-Rules sind so gewählt, dass sie für 
+die meisten Anwendungen passen. Sollte ihre Platine 
+besondere Anforderungen haben, treffen Sie die erforderlichen
+Einstellungen hier und speichern die Design Rules unter 
+einem neuen Namen ab.</description>
+<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
-Your Eurocircuits Team
+The default Design Rules have been set to cover
+a wide range of applications. Your particular design
+may have different requirements, so please make the
+necessary adjustments and save your customized
+design rules under a new name.</description>
+<description language="zh">&lt;b&gt;Seeed Studio EAGLE Design Rules&lt;/b&gt;
 </description>
 <param name="layerSetup" value="(1*16)"/>
-<param name="mtCopper" value="0.018mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.018mm"/>
-<param name="mtIsolate" value="1.55mm 0.71mm 0.36mm 0.2mm 0.2mm 0.2mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
-<param name="mdWireWire" value="0.15mm"/>
-<param name="mdWirePad" value="0.15mm"/>
-<param name="mdWireVia" value="0.15mm"/>
-<param name="mdPadPad" value="0.15mm"/>
-<param name="mdPadVia" value="0.15mm"/>
-<param name="mdViaVia" value="0.15mm"/>
+<param name="mtCopper" value="0.035mm 0.0175mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.0175mm 0.035mm"/>
+<param name="mtIsolate" value="1.5mm 1.1mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
+<param name="mdWireWire" value="6mil"/>
+<param name="mdWirePad" value="6mil"/>
+<param name="mdWireVia" value="6mil"/>
+<param name="mdPadPad" value="6mil"/>
+<param name="mdPadVia" value="6mil"/>
+<param name="mdViaVia" value="6mil"/>
 <param name="mdSmdPad" value="0mil"/>
 <param name="mdSmdVia" value="0mil"/>
 <param name="mdSmdSmd" value="0mil"/>
-<param name="mdViaViaSameLayer" value="0.2mm"/>
+<param name="mdViaViaSameLayer" value="8mil"/>
 <param name="mnLayersViaInSmd" value="2"/>
-<param name="mdCopperDimension" value="0.25mm"/>
-<param name="mdDrill" value="0.35mm"/>
+<param name="mdCopperDimension" value="10mil"/>
+<param name="mdDrill" value="10mil"/>
 <param name="mdSmdStop" value="0mil"/>
-<param name="msWidth" value="0.15mm"/>
-<param name="msDrill" value="0.15mm"/>
-<param name="msMicroVia" value="25mm"/>
+<param name="msWidth" value="6mil"/>
+<param name="msDrill" value="0.29971875mm"/>
+<param name="msMicroVia" value="12mil"/>
 <param name="msBlindViaRatio" value="0.5"/>
 <param name="rvPadTop" value="0.25"/>
 <param name="rvPadInner" value="0.25"/>
 <param name="rvPadBottom" value="0.25"/>
 <param name="rvViaOuter" value="0.25"/>
 <param name="rvViaInner" value="0.25"/>
-<param name="rvMicroViaOuter" value="0"/>
-<param name="rvMicroViaInner" value="0"/>
-<param name="rlMinPadTop" value="0.125mm"/>
-<param name="rlMaxPadTop" value="2.5mm"/>
-<param name="rlMinPadInner" value="0.125mm"/>
-<param name="rlMaxPadInner" value="2.5mm"/>
-<param name="rlMinPadBottom" value="0.125mm"/>
-<param name="rlMaxPadBottom" value="2.5mm"/>
-<param name="rlMinViaOuter" value="0.125mm"/>
-<param name="rlMaxViaOuter" value="2.5mm"/>
-<param name="rlMinViaInner" value="0.125mm"/>
-<param name="rlMaxViaInner" value="2.5mm"/>
-<param name="rlMinMicroViaOuter" value="2.5mm"/>
-<param name="rlMaxMicroViaOuter" value="25mm"/>
-<param name="rlMinMicroViaInner" value="2.5mm"/>
-<param name="rlMaxMicroViaInner" value="25mm"/>
+<param name="rvMicroViaOuter" value="0.25"/>
+<param name="rvMicroViaInner" value="0.25"/>
+<param name="rlMinPadTop" value="10mil"/>
+<param name="rlMaxPadTop" value="20mil"/>
+<param name="rlMinPadInner" value="10mil"/>
+<param name="rlMaxPadInner" value="20mil"/>
+<param name="rlMinPadBottom" value="10mil"/>
+<param name="rlMaxPadBottom" value="20mil"/>
+<param name="rlMinViaOuter" value="6mil"/>
+<param name="rlMaxViaOuter" value="20mil"/>
+<param name="rlMinViaInner" value="6mil"/>
+<param name="rlMaxViaInner" value="20mil"/>
+<param name="rlMinMicroViaOuter" value="4mil"/>
+<param name="rlMaxMicroViaOuter" value="20mil"/>
+<param name="rlMinMicroViaInner" value="4mil"/>
+<param name="rlMaxMicroViaInner" value="20mil"/>
 <param name="psTop" value="-1"/>
 <param name="psBottom" value="-1"/>
-<param name="psFirst" value="-1"/>
+<param name="psFirst" value="0"/>
 <param name="psElongationLong" value="100"/>
 <param name="psElongationOffset" value="100"/>
-<param name="mvStopFrame" value="0"/>
+<param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
-<param name="mlMinStopFrame" value="0mil"/>
-<param name="mlMaxStopFrame" value="0mil"/>
+<param name="mlMinStopFrame" value="2mil"/>
+<param name="mlMaxStopFrame" value="2mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0.45mm"/>
+<param name="mlViaStopLimit" value="100mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
-<param name="slThermalIsolate" value="0.2mm"/>
+<param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
+<param name="checkRestrict" value="0"/>
 <param name="checkStop" value="0"/>
 <param name="checkValues" value="0"/>
 <param name="checkNames" value="1"/>
@@ -6407,9 +6377,7 @@ Your Eurocircuits Team
 <via x="9.55" y="69.45" extent="1-16" drill="0.3" diameter="0.6"/>
 <contactref element="JACK" pad="P1"/>
 <contactref element="C1" pad="+"/>
-<wire x1="2.402821875" y1="68.66781875" x2="2.402821875" y2="68.597178125" width="0.254" layer="16"/>
 <wire x1="10.1919" y1="63.0811625" x2="10.1919" y2="68.5581" width="1.27" layer="16"/>
-<wire x1="10.1919" y1="68.5581" x2="10" y2="68.75" width="1.27" layer="16"/>
 </signal>
 <signal name="N$12">
 <contactref element="IC2" pad="P5"/>
@@ -6677,14 +6645,14 @@ Your Eurocircuits Team
 <via x="65.0625" y="59" extent="1-16" drill="0.3" diameter="0.6"/>
 <wire x1="65.3125" y1="58.75" x2="65.0625" y2="59" width="0.2032" layer="16"/>
 </signal>
-<signal name="OUT03">
+<signal name="OUT0">
 <contactref element="IC8" pad="2"/>
 <contactref element="IC6" pad="5"/>
 <wire x1="63.3819" y1="52.343090625" x2="63.3194" y2="52.280590625" width="0.2032" layer="1"/>
-<wire x1="63.3194" y1="52.280590625" x2="60.844409375" y2="52.280590625" width="0.2032" layer="1"/>
-<wire x1="60.844409375" y1="52.280590625" x2="60.625" y2="52.5" width="0.2032" layer="1"/>
-<via x="60.625" y="52.5" extent="1-16" drill="0.3" diameter="0.6"/>
-<wire x1="60.625" y1="52.5" x2="60.625" y2="59.875" width="0.2032" layer="16"/>
+<wire x1="63.3194" y1="52.280590625" x2="60.781909375" y2="52.280590625" width="0.2032" layer="1"/>
+<wire x1="60.781909375" y1="52.280590625" x2="60.625" y2="52.4375" width="0.2032" layer="1"/>
+<via x="60.625" y="52.4375" extent="1-16" drill="0.3" diameter="0.6"/>
+<wire x1="60.625" y1="52.4375" x2="60.625" y2="59.875" width="0.2032" layer="16"/>
 <wire x1="50.3184" y1="58.002" x2="50.3184" y2="59.8184" width="0.2032" layer="1"/>
 <wire x1="50.3184" y1="59.8184" x2="50.5" y2="60" width="0.2032" layer="1"/>
 <wire x1="50.5" y1="60" x2="60.25" y2="60" width="0.2032" layer="1"/>
@@ -7152,7 +7120,7 @@ Your Eurocircuits Team
 <wire x1="66.0501" y1="36.55" x2="67.3375" y2="36.55" width="0.2032" layer="1"/>
 <wire x1="67.3375" y1="36.55" x2="67.6" y2="36.8125" width="0.2032" layer="1"/>
 </signal>
-<signal name="OUT02">
+<signal name="OUT1">
 <contactref element="IC9" pad="2"/>
 <contactref element="IC6" pad="40"/>
 <wire x1="63.4499" y1="47.25" x2="62.3125" y2="47.25" width="0.2032" layer="1"/>
@@ -7164,7 +7132,7 @@ Your Eurocircuits Team
 <wire x1="55.2684" y1="53.052" x2="62.1355" y2="53.052" width="0.2032" layer="1"/>
 <wire x1="62.1355" y1="53.052" x2="62.3125" y2="52.875" width="0.2032" layer="1"/>
 </signal>
-<signal name="OUT01">
+<signal name="OUT2">
 <contactref element="IC10" pad="2"/>
 <contactref element="IC6" pad="41"/>
 <wire x1="63.4499" y1="42.25" x2="62.5" y2="42.25" width="0.2032" layer="1"/>
@@ -7180,7 +7148,7 @@ Your Eurocircuits Team
 <wire x1="64" y1="54.5" x2="62.625" y2="54.5" width="0.2032" layer="16"/>
 <wire x1="62.5625" y1="54.4375" x2="62.625" y2="54.5" width="0.2032" layer="16"/>
 </signal>
-<signal name="OUT00">
+<signal name="OUT3">
 <contactref element="IC11" pad="2"/>
 <contactref element="IC6" pad="42"/>
 <wire x1="63.4499" y1="37.5" x2="64.53125" y2="37.5" width="0.2032" layer="1"/>

PCB/harp analog input v1.0.sch

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="9.5.1">
+<eagle version="9.6.2">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
@@ -16539,7 +16539,7 @@ Copyright 2021 Hardware Platform</text>
 <wire x1="256.54" y1="81.28" x2="264.16" y2="81.28" width="0.1524" layer="91"/>
 </segment>
 </net>
-<net name="OUT03" class="0">
+<net name="OUT0" class="0">
 <segment>
 <wire x1="165.1" y1="200.66" x2="144.78" y2="200.66" width="0.1524" layer="91"/>
 <label x="144.78" y="200.66" size="1.778" layer="95"/>
@@ -16551,7 +16551,7 @@ Copyright 2021 Hardware Platform</text>
 <label x="35.56" y="83.82" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="OUT00" class="0">
+<net name="OUT3" class="0">
 <segment>
 <wire x1="165.1" y1="223.52" x2="144.78" y2="223.52" width="0.1524" layer="91"/>
 <label x="144.78" y="223.52" size="1.778" layer="95"/>
@@ -16563,7 +16563,7 @@ Copyright 2021 Hardware Platform</text>
 <label x="119.38" y="50.8" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="OUT02" class="0">
+<net name="OUT1" class="0">
 <segment>
 <wire x1="165.1" y1="228.6" x2="144.78" y2="228.6" width="0.1524" layer="91"/>
 <label x="144.78" y="228.6" size="1.778" layer="95"/>
@@ -16575,7 +16575,7 @@ Copyright 2021 Hardware Platform</text>
 <label x="35.56" y="50.8" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="OUT01" class="0">
+<net name="OUT2" class="0">
 <segment>
 <wire x1="165.1" y1="226.06" x2="144.78" y2="226.06" width="0.1524" layer="91"/>
 <label x="144.78" y="226.06" size="1.778" layer="95"/>