Skip to content

DTL H2000 reverse engineering

Nicolas Noble edited this page Feb 26, 2020 · 6 revisions

On the DTL-H2000, the SBUS of the PlayStation has several buffers and level translators, unlike the retail hardware. Tracing through it is therefore a bit more difficult.

The most important piece of information however is probably the pinout of the 100 pins bridge over the two cards. Note that most of these signals won't go directly to their respective devices, but instead will go over level translators. These will be noted in the table below.

signal CPU tr pin translator br tr pin br pin br tr pin translator PIO tr pin
!RESET 11 U65 38 67 8 U737 41
Clone this wiki locally