SKR PRO 1.2

[DenEric]

I am trying to get grblhal installed on my SKR pro 1.2 with a STM32F407ZGT6 processor running at 168MHz and TMC2209 drivers. Can someone tell which files I need to update/create to be able to compile for this board

[terjeio]

Using the Web Builder is the easiest? If you choose the bootloader version copy the generated binary to a SD card to flash it.

[terjeio]

Did you reboot (power up) the controller after inserting the SD card? And did the filename change?
BTW I see that I have missed a symbol in the Web Builder configuration for the board, this may prevent grblHAL starting. I have added this now.

[DenEric]

I did reboot but the filename did not change, I'll have a test with the updated configuration

[DenEric]

Not working, it seems the card completely ignores the sd card.

[terjeio]

Has the bootloader been overwritten?
A way to test if it is working is to flash a new version of Marlin, does this work?

Do you have access to a ST-Link programmer?

[DenEric]

Found it, the sd card was formatted in 'ext4' and the board needs FAT32. Thank you for the assistance