Nikon Z Cameras

[adrianuseless]

Hi

A friend has just got a Nikon Z8 and he found they too have no wireless remotes that don't need a receiver unit

Would the fuji one be able to work with it?

its strange how these modern cameras just rely on apps on your ophone

thanks

Adrian

[gkoh]

Hi

Thank you for raising a discussion topic, it is certainly an interesting question with an interesting answer.

A friend has just got a Nikon Z8 and he found they too have no wireless remotes that don't need a receiver unit

Would the fuji one be able to work with it?

The control protocols for each manufacturer are distinctly different, thus the Fujifilm implementation will not apply to the Nikon system. And as I have discovered, even within the same manufacturer different cameras operate differently.

Further to this, I have recently acquired a Nikon Coolpix B600 for implementing support. However, the Nikon remote situation is bizarre, to put it politely.
My current aim is to emulate the ML-L7 bluetooth remote, which appears to work with some of the Coolpix range and some of the Z range (but not the Z8, so this will not immediately help your friend).

According to Nikon's documentation:
https://nikonimglib.com/snbr/onlinehelp/en/compatible_cameras_44.html

the matrix of app vs ML-L7 support is perplexing.
Ultimately, if I can emulate the ML-L7, it should eventually be possible to also emulate the remote on SnapBridge (and thus support the Z8).

its strange how these modern cameras just rely on apps on your ophone

Agreed. It would be less irritating if the apps weren't terrible quality.

I'm in the midst of understanding the operation of the Nikon ML-L7 and the Coolpix B600.
The control protocol is 1000x more complex than Fujifilm or Canon. It is going to take quite some effort, I am not 100% confident I will succeed.
However, I will persist and provide updates here (but don't expect anything for weeks, if not months).

[gkoh]

Hi

I have tried to download but im not that good on the tech side

Please follow the install guide linked on the project page:

https://github.com/gkoh/furble/wiki/Easy-Web-Install

You will need a supported browser, like Chrome.

I have the m5stick c plus and the original firmware 1.2

There have been many additions since then, major features are, again, on the project page:

https://github.com/gkoh/furble?tab=readme-ov-file#what-works

[adrianuseless]

Thanks, updated and much better now!!

is there a way to cancel the auto connect if we just want to turn it off rather than holding the side button for 3/4 sec?

Cancel doesn’t do anything for me

great update

Adrian

[gkoh]

Thanks, updated and much better now!!

Good to hear!

is there a way to cancel the auto connect if we just want to turn it off rather than holding the side button for 3/4 sec?

Cancel doesn’t do anything for me

If Cancel doesn't do anything, that is a bug and should be fixed.
Please describe what you are doing and I will attempt to reproduce and identify the issue.

great update

Thank you!

[adrianuseless]

I have it connected to my camera and then when I turn off the camera to change lens it keeps trying to connect but the option to cancel doesn't work

[gkoh]

I have it connected to my camera and then when I turn off the camera to change lens it keeps trying to connect but the option to cancel doesn't work

Thank you, I can reproduce this and raised #175.

[adrianuseless]

Fyi I have tried the new firmware on the M5 stick plus 2 and its great but it will not turn off while charging where as the m5 stick c does

[gkoh]

Fyi I have tried the new firmware on the M5 stick plus 2 and its great but it will not turn off while charging where as the m5 stick c does

I managed to damage my Plus2 and currently waiting on parts to repair. I will look into this when possible.