Skip to content

Commit b395bf8

Browse files
fpistmfpistm
committed
Add all generated STM32F3xx generic variant files
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
1 parent f60e945 commit b395bf8

File tree

240 files changed

+29658
-0
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

240 files changed

+29658
-0
lines changed

‎variants/STM32F3xx/F301C(6-8)Tx_F301C8Yx/PeripheralPins.c

Lines changed: 232 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,232 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32F301C(6-8)Tx.xml, STM32F301C8Yx.xml
15+
* STM32F318C8Tx.xml, STM32F318C8Yx.xml
16+
* CubeMX DB release 6.0.20
17+
*/
18+
#if !defined(CUSTOM_PERIPHERAL_PINS)
19+
#include "Arduino.h"
20+
#include "PeripheralPins.h"
21+
22+
/* =====
23+
* Notes:
24+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
25+
* HW peripheral instances. You can use them the same way as any other "normal"
26+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
27+
*
28+
* - Commented lines are alternative possibilities which are not used per default.
29+
* If you change them, you will have to know what you do
30+
* =====
31+
*/
32+
33+
//*** ADC ***
34+
35+
#ifdef HAL_ADC_MODULE_ENABLED
36+
WEAK const PinMap PinMap_ADC[] = {
37+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
38+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
39+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
40+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
41+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
42+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
43+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
44+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
45+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
46+
{PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
47+
{PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
48+
{NC, NP, 0}
49+
};
50+
#endif
51+
52+
//*** DAC ***
53+
54+
#ifdef HAL_DAC_MODULE_ENABLED
55+
WEAK const PinMap PinMap_DAC[] = {
56+
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
57+
{NC, NP, 0}
58+
};
59+
#endif
60+
61+
//*** I2C ***
62+
63+
#ifdef HAL_I2C_MODULE_ENABLED
64+
WEAK const PinMap PinMap_I2C_SDA[] = {
65+
{PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
66+
{PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
67+
{PB_5, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)},
68+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
69+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
70+
{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
71+
{NC, NP, 0}
72+
};
73+
#endif
74+
75+
#ifdef HAL_I2C_MODULE_ENABLED
76+
WEAK const PinMap PinMap_I2C_SCL[] = {
77+
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
78+
{PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
79+
{PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
80+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
81+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
82+
{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
83+
{NC, NP, 0}
84+
};
85+
#endif
86+
87+
//*** TIM ***
88+
89+
#ifdef HAL_TIM_MODULE_ENABLED
90+
WEAK const PinMap PinMap_TIM[] = {
91+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
92+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
93+
{PA_1_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
94+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
95+
{PA_2_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
96+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
97+
{PA_3_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
98+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
99+
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
100+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
101+
{PA_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
102+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
103+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
104+
{PA_9_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
105+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
106+
{PA_10_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
107+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
108+
{PA_11_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
109+
{PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
110+
{PA_12_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
111+
{PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
112+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
113+
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
114+
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
115+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
116+
{PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
117+
{PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1
118+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
119+
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
120+
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
121+
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
122+
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
123+
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
124+
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
125+
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
126+
{PB_14_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
127+
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
128+
{PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
129+
{PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
130+
{PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N
131+
{PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
132+
{NC, NP, 0}
133+
};
134+
#endif
135+
136+
//*** UART ***
137+
138+
#ifdef HAL_UART_MODULE_ENABLED
139+
WEAK const PinMap PinMap_UART_TX[] = {
140+
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
141+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
142+
{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
143+
{PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
144+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
145+
{PB_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
146+
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
147+
{NC, NP, 0}
148+
};
149+
#endif
150+
151+
#ifdef HAL_UART_MODULE_ENABLED
152+
WEAK const PinMap PinMap_UART_RX[] = {
153+
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
154+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
155+
{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
156+
{PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
158+
{PB_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159+
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
160+
{NC, NP, 0}
161+
};
162+
#endif
163+
164+
#ifdef HAL_UART_MODULE_ENABLED
165+
WEAK const PinMap PinMap_UART_RTS[] = {
166+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
167+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
168+
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
169+
{NC, NP, 0}
170+
};
171+
#endif
172+
173+
#ifdef HAL_UART_MODULE_ENABLED
174+
WEAK const PinMap PinMap_UART_CTS[] = {
175+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
176+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
177+
{PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
178+
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
179+
{NC, NP, 0}
180+
};
181+
#endif
182+
183+
//*** SPI ***
184+
185+
#ifdef HAL_SPI_MODULE_ENABLED
186+
WEAK const PinMap PinMap_SPI_MOSI[] = {
187+
{PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
188+
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
189+
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
190+
{NC, NP, 0}
191+
};
192+
#endif
193+
194+
#ifdef HAL_SPI_MODULE_ENABLED
195+
WEAK const PinMap PinMap_SPI_MISO[] = {
196+
{PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
197+
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
198+
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
199+
{NC, NP, 0}
200+
};
201+
#endif
202+
203+
#ifdef HAL_SPI_MODULE_ENABLED
204+
WEAK const PinMap PinMap_SPI_SCLK[] = {
205+
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
206+
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
207+
{PF_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
208+
{NC, NP, 0}
209+
};
210+
#endif
211+
212+
#ifdef HAL_SPI_MODULE_ENABLED
213+
WEAK const PinMap PinMap_SPI_SSEL[] = {
214+
{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
215+
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
216+
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
217+
{PF_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
218+
{NC, NP, 0}
219+
};
220+
#endif
221+
222+
//*** No CAN ***
223+
224+
//*** No ETHERNET ***
225+
226+
//*** No QUADSPI ***
227+
228+
//*** No USB ***
229+
230+
//*** No SD ***
231+
232+
#endif /* !CUSTOM_PERIPHERAL_PINS */

‎variants/STM32F3xx/F301C(6-8)Tx_F301C8Yx/PinNamesVar.h

Lines changed: 40 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,40 @@
1+
/* Alternate pin name */
2+
PA_1_ALT1 = PA_1 | ALT1,
3+
PA_2_ALT1 = PA_2 | ALT1,
4+
PA_3_ALT1 = PA_3 | ALT1,
5+
PA_7_ALT1 = PA_7 | ALT1,
6+
PA_9_ALT1 = PA_9 | ALT1,
7+
PA_10_ALT1 = PA_10 | ALT1,
8+
PA_11_ALT1 = PA_11 | ALT1,
9+
PA_12_ALT1 = PA_12 | ALT1,
10+
PB_14_ALT1 = PB_14 | ALT1,
11+
PB_15_ALT1 = PB_15 | ALT1,
12+
PB_15_ALT2 = PB_15 | ALT2,
13+
14+
/* SYS_WKUP */
15+
#ifdef PWR_WAKEUP_PIN1
16+
SYS_WKUP1 = PA_0,
17+
#endif
18+
#ifdef PWR_WAKEUP_PIN2
19+
SYS_WKUP2 = PC_13,
20+
#endif
21+
#ifdef PWR_WAKEUP_PIN3
22+
SYS_WKUP3 = NC,
23+
#endif
24+
#ifdef PWR_WAKEUP_PIN4
25+
SYS_WKUP4 = NC,
26+
#endif
27+
#ifdef PWR_WAKEUP_PIN5
28+
SYS_WKUP5 = NC,
29+
#endif
30+
#ifdef PWR_WAKEUP_PIN6
31+
SYS_WKUP6 = NC,
32+
#endif
33+
#ifdef PWR_WAKEUP_PIN7
34+
SYS_WKUP7 = NC,
35+
#endif
36+
#ifdef PWR_WAKEUP_PIN8
37+
SYS_WKUP8 = NC,
38+
#endif
39+
40+
/* No USB */

‎variants/STM32F3xx/F301C(6-8)Tx_F301C8Yx/boards_entry.txt

Lines changed: 29 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,29 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic F301C6Tx
7+
GenF3.menu.pnum.GENERIC_F301C6TX=Generic F301C6Tx
8+
GenF3.menu.pnum.GENERIC_F301C6TX.upload.maximum_size=32768
9+
GenF3.menu.pnum.GENERIC_F301C6TX.upload.maximum_data_size=16384
10+
GenF3.menu.pnum.GENERIC_F301C6TX.build.board=GENERIC_F301C6TX
11+
GenF3.menu.pnum.GENERIC_F301C6TX.build.product_line=STM32F301x8
12+
GenF3.menu.pnum.GENERIC_F301C6TX.build.variant=STM32F3xx/F301C(6-8)Tx_F301C8Yx
13+
14+
# Generic F301C8Tx
15+
GenF3.menu.pnum.GENERIC_F301C8TX=Generic F301C8Tx
16+
GenF3.menu.pnum.GENERIC_F301C8TX.upload.maximum_size=65536
17+
GenF3.menu.pnum.GENERIC_F301C8TX.upload.maximum_data_size=16384
18+
GenF3.menu.pnum.GENERIC_F301C8TX.build.board=GENERIC_F301C8TX
19+
GenF3.menu.pnum.GENERIC_F301C8TX.build.product_line=STM32F301x8
20+
GenF3.menu.pnum.GENERIC_F301C8TX.build.variant=STM32F3xx/F301C(6-8)Tx_F301C8Yx
21+
22+
# Generic F301C8Yx
23+
GenF3.menu.pnum.GENERIC_F301C8YX=Generic F301C8Yx
24+
GenF3.menu.pnum.GENERIC_F301C8YX.upload.maximum_size=65536
25+
GenF3.menu.pnum.GENERIC_F301C8YX.upload.maximum_data_size=16384
26+
GenF3.menu.pnum.GENERIC_F301C8YX.build.board=GENERIC_F301C8YX
27+
GenF3.menu.pnum.GENERIC_F301C8YX.build.product_line=STM32F301x8
28+
GenF3.menu.pnum.GENERIC_F301C8YX.build.variant=STM32F3xx/F301C(6-8)Tx_F301C8Yx
29+

‎variants/STM32F3xx/F301C(6-8)Tx_F301C8Yx/generic_clock.c

Lines changed: 28 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,28 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_F301C6TX) || defined(ARDUINO_GENERIC_F301C8TX) ||\
14+
defined(ARDUINO_GENERIC_F301C8YX)
15+
#include "pins_arduino.h"
16+
17+
/**
18+
* @brief System Clock Configuration
19+
* @param None
20+
* @retval None
21+
*/
22+
WEAK void SystemClock_Config(void)
23+
{
24+
/* SystemClock_Config can be generated by STM32CubeMX */
25+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
26+
}
27+
28+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)