Error during creation of HLS IP cores

[lizajoseph]

When I do “make all”, I seem to get the same error on HLS ip cores as seen below.

WARNING: [Vivado 12-3523] Attempt to change 'Component_Name' from 'axis_256_to_64_converter' to 'axis_256to_64_converter' is not allowed and is ignored.
ERROR: [Coretcl 2-1134] No IP matching VLNV 'ethz.systems:hls:toe:1.6' was found. Please check your repository configuration.

while executing

"source $path_to_pack_tcl/network_stack.tcl"
(file "kernel/network_krnl/package_network_krnl.tcl" line 85)

while executing

"source -notrace ${package_tcl_path}"
(file "scripts/gen_xo.tcl" line 53)
INFO: [Common 17-206] Exiting Vivado at Thu Mar 14 15:29:41 2024...
make: *** [config_rtl.mk:4: _x.hw.xilinx_u50_gen3x16_xdma_5_202210_1/network_krnl.xo] Error 1

Has anyone able to fix this issue?

[Mishmeria]

i have same issue. Are you fix this already? if fixed pls to me how to. thank you!

[Seong-yeop]

The issue likely arises from selecting the wrong version of the device during the CMake configuration in the 'make ip' process.

To resolve this, follow these steps:

1. Delete your build directory.
2. Re-run the CMake configuration with the correct device by using the following command:

cmake .. -DFDEV_NAME=<your_device> -DTCP_STACK_EN=1

Make sure to replace <your_device> with the correct device name you intend to use. Then proceed with the build process.