Solar PV divert

[rcmad]

Hi. I have just got this integration up and running and want to setup the solar divert part. I have a sensor in homassistant that pulls house load in watts

I have added that into the openevse setup

But I am showing unavailable for PV available current.

What have I got wrong with the config?

[firstof9]

You have no solar production sensor setup.

[rcmad]

Doh!

[rcmad]

I did actually have the same sensor in the solar sensor setup, so I still have something else wrong.

[firstof9]

Once you have a solar production sensor or grid import/export sensor set, if you toggle on PV divert in eco mode it'll charge by only what solar output is allowing.

[thekeymeister]

I've just been trying to get this working myself, I got there in the end, the bit that was missing was changing mode to "Export" in the Openevse's own config page under Self Production. Before that, no matter what I tried, the OpenEVSE PV Available Current was always showing 0A. Probably my own misunderstanding of the device, but thought I should post in case it helps someone else get it working.

Not sure if it's a bug with this integration or my misunderstanding again, I noticed that once you reconfigure to add the sensors, it's impossible to remove them, you can only replace them with others. If you remove them it seems to accept it when you press submit, however when you go to reconfigure the old values are still there. This made testing a little bit difficult!