Help setup Growatt PV MID 20KTL3-X1

[shocker2]

Hello,
I'm trying to congure evcc for the first time. My setup at home is with 3 phase and I'm using Go-E Charger Gemini 22kW with a Tesla EV. I already have the GO-E controller to use the PV surplus and Load balancing but I would like to try evcc as well.
I have managed to install the go-e charger and the tesla car but during the evcc configure there is no Growatt invertor to choose from the list.
What should I add in the config for the Growatt PV MID 20KTL3-X1? The system is connected with SDM630 Modbus v3 and ShineWiFi-X via USB.

Attached my config generated so far:
config.txt

[shocker2]

Can anyone confirm if Growatt PV MID 20KTL3-X1 is supported?

[premultiply]

I don't know. But you can simply try the existing Growatt templates.
You add a meter and try by running evcc meter. If you get valid data it will be fine.

[avantgarde0707]

@shocker2
were you successful with your setup? if so, what does your config look like?
tnx

[shocker2]

@shocker2

were you successful with your setup? if so, what does your config look like?

tnx

No, got no luck with Growatt. I'm using another solution that is working. If you will get lucky let me know 😀

[avantgarde0707]

Can I ask what is your solution?