ROS2 Calibration Using Kalibr

Kalibr requires ROS1 to run. If you are on a ROS2 system and do not want to corrupt your environmental variables, we recommend using the docker container to run all Kalibr commands. Either using a ROS1 system or the docker will require getting your camera and IMU data into the ROS1 rosbag format. This guide will have you install a helper toolbox called rosbags to handle this conversion. The ROS2 bag must only have ROS2 standard types in it (such as Image and IMU standard messages). Please checkout the official documentation and project:

• Documentation: https://ternaris.gitlab.io/rosbags/
• Source Code: https://gitlab.com/ternaris/rosbags

First convert the ROS2 folder (contains the database and metadata file) into the ROS1 bag file.

pip3 install rosbags>=0.9.11
rosbags-convert <ros2_bag_folder> --dst calib_01.bag

From here you can enter your docker (this assumes you have clone and build the docker already):

FOLDER=$(pwd)
xhost +local:root
docker run -it -e "DISPLAY" -e "QT_X11_NO_MITSHM=1" \
    -v "/tmp/.X11-unix:/tmp/.X11-unix:rw" \
    -v "$FOLDER:/data" kalibr

and then run your calibration commands:

source devel/setup.bash
rosrun kalibr kalibr_calibrate_cameras \
    --bag /data/calib_01.bag --target /data/april_6x6.yaml \
    --models pinhole-radtan pinhole-radtan \
    --topics /cam0/image_raw /cam1/image_raw

To go the opposite way from bagcreater, we can do the following:

pip3 install rosbags>=0.9.11
rosbags-convert calib_01.bag --dst <ros2_bag_folder>