Update libraries/SD_MMC/examples/SDMMC_time/SDMMC_time.ino

Co-authored-by: Lucas Saavedra Vaz <lucassvaz@yahoo.com.br>

Author: PilnyTomas

libraries/SD_MMC/examples/SDMMC_time/SDMMC_time.ino

@@ -213,7 +213,7 @@ void setup(){
     // If you are using any other ESP32-S3 board than ESP32-S3-USB-OTG which has preset default pins, you will
     //    need to specify the pins with the following example of SD_MMC.setPins()
     // If you want to use only 1-bit mode, you can use the line with only one data pin (d0) begin changed.
-    // Please note that ESP32 does not allow pin change and will fail unless you enter the same pin config as is the hardwired.
+    // Please note that ESP32 does not allow pin changes and will fail unless you enter the same pin config as is the hardwired.
 #if defined(SOC_SDMMC_USE_GPIO_MATRIX) && not defined(BOARD_HAS_SDMMC)
     if(use_1_bit_mode){
       if(! SD_MMC.setPins(clk, cmd, d0)){ // 1-bit line version