A11(3111) error on virtual RC100

[ghost20219721]

Hi
when configuring virtual RC100 thermostat I get error on my RC310 a11(3111) incorrect thermostat

There is no option to select RC100H, only RC310, RC200, RC100

log-2.txt

There is no errors when emulation RC200, but in this case temperature programs is unavailable

[uwec]

I get the same error A11(3111) trying to have a virtual thermostat RC100H, using v3.7.3-dev17 and bc400 controller.

I send every 10sec values to Mqtt topics thermostat/hc1/remotetemp and thermostat/hc1/remotehum . EMS-ESP Shows me a RC200 only.
But I cannot select a RC200 in my menue. RC200 is not compatible with BC400 Controller according Installation manual.

And i get following error:
2025-10-09T20:04:38.258 T 8630: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 19 (offset 9) 2025-10-09T20:04:38.454 T 8631: [emsesp] boiler(0x08) B all(0x00), UBAMonitorWWPlus(0xE9), data: 0F 7F FF 7F FF [00 00 00 00 46](tel:00 00 00 00 46) 3C [00 00 00 00 00 00 00](tel:00 00 00 00 00 00 00) [00 00 00 00 00](tel:00 00 00 00 00) 0F 2025-10-09T20:04:38.632 T 8632: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 18 (offset 9) 2025-10-09T20:04:38.970 T 8633: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 17 (offset 9) 2025-10-09T20:04:39.181 T 8634: [emsesp] gateway(0x4B) W boiler(0x08), ?(0x04D8), data: FF FF 2025-10-09T20:04:39.288 T 8635: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 16 (offset 9) 2025-10-09T20:04:39.577 T 8636: [emsesp] thermostat(0x38) W thermostat(0x10), RemoteTemp(0x042B), data: 00 DF 08 B9 01 2025-10-09T20:04:40.001 I 8637: [command] Called command thermostat/remotetemp (room temperature from remote) with value 22.3 and id 1 on device 0x10 2025-10-09T20:04:40.540 T 8638: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 15 (offset 9) 2025-10-09T20:04:40.540 T 8639: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 14 (offset 9) 2025-10-09T20:04:40.540 W 8640: [command] Command remotehum: 50 failed (Error) 2025-10-09T20:04:40.540 E 8641: [mqtt] MQTT command failed with error Command remotehum: 50 failed (Error) (Error) 2025-10-09T20:04:41.198 T 8642: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 15 (offset 9) 2025-10-09T20:04:40.997 T 8643: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 14 (offset 9) 2025-10-09T20:04:42.796 T 8644: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 13 (offset 9) 2025-10-09T20:04:43.187 T 8645: [emsesp] boiler(0x08) B all(0x00), HpPower(0x048D), data: 10 (offset 17) 2025-10-09T20:04:43.356 T 8646: [emsesp] boiler(0x08) B all(0x00), UBAMonitorFastPlus(0xE4), data: 10 (offset 10) 2025-10-09T20:04:43.680 T 8647: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 12 (offset 9) 2025-10-09T20:04:43.904 T 8648: [emsesp] boiler(0x08) B all(0x00), HPPump2(0x02D6), data: 02 11 (offset 9) 2025/