Bosch Pro-Grade ZigBee Wireless Motion Detector ISW-ZPR1-WP13

[mercballs]

Tried to pair this PIR sensor and it seems to be having issues.

It claims to get Zigbee HA 1.2 certified.

http://www.zigbee.org/zigbee-products-2/#zigbeecertifiedproducts/productdetails3/5553fe56f7f0b6063927b0c5/
https://www.amazon.com/gp/product/B00PRBMDKW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

[mercballs]

Also not sure if it helps, but here is the code for smart things to get it working.

https://raw.githubusercontent.com/tomasaxerot/SmartThings/master/devicetypes/tomasaxerot/bosch-motion-detector.src/bosch-motion-detector.groovy

[mercballs]

Any word on this? I still have this one sitting on my desk and would love to use it with deconz. Let me know if I can provide anymore info.

[josephyancey]

Same here. +1

[manup]

Since this is a IAS Zone based motion sensor it might work just by whitelist the model ids specified in the bosch-motion-detector.groovy file. I'll put it on the list for the next releases.

[josephyancey]

Has there been any movement on this?

[manup]

I've added the two models listed in the groovy file, not sure about the manufacturer code (0x1133).
With .46 (arriving soon) you may try to start the sensor search and then reset the device to let it rejoin.

Please let me know if the sensor appears in the REST-API I can then add it to the Phoscon App.

[apmon]

I just tried pairing one of these devices with deCONZ .47. however, it doesn't look like it is working. the deCONZ gui doesn't seem to show the second dot to select a cluster and show the cluster info.

[manup]

Hmm looks like some descriptors weren't queried.
How long is it running like this? Is the sensor connected directly to the gateway or a light in between?

[apmon]

It looks like it is directly connected to the conbee, and it has now been connected roughly since an hour. I.e. shortly before I added the comment with the same result. I tried to reset and repair the device, but it looked like the same result

[manup]

Does it blink blue or green from time to time? Normally motion sensors would poll quite frequently (green blinking) and missing descriptors should be queried there.

[apmon]

I have seen it blink yellow and red, but I don't think I have seen it blink blue or green

[manup]

Hard to tell what's the cause maybe logging yields some more info, if you can please pair the sensor again while logging is enabled:

deCONZ --dbg-aps=2 --http-port=80

[apmon]

Not sure if this is of much use, but attached is a log during an attempted reset/repairing of the sensor. I did not delete any previous entries of that sensor in deCONZ.

The IEEE address of the sensor is 0x00155f006c247389.
deCONZ.log