v1.12.3 (Beta)

[deividAlfa]

• Detect flash size at boot, hopefully this will be the fix for some controllers.
  I suspect some controllers are using High density STM32 (RC/RD/RE), which have a larger page size.
  If so, this should fix the big issue once for all.

• Fix a bug in Tip Editor not selecting the tip choosen in the Tip Editor screen.

  Please report any bugs found!

[iopia]

Good afternoon! on version 1.12.3 an error appears after changing the menu "bad checksum error/ flash error"
KSGER_v2_OLED.zip

[iopia]

[deividAlfa]

Does it work gain after the bad checksum?
Happens only with SYSTEM settings, or also with PROFILE or ADDONS?
Please upload picture of the stm32.
Thanks!

[iopia]

Does it work gain after the bad checksum?- no, the error appears after reboot
Happens only with SYSTEM settings, or also with PROFILE or ADDONS?- everywhere

there is no error on version 1.12.2

stm32f103cbu6

[deividAlfa]

I mean, works again after the checksum error or it keeps showing the checksum error everytime?

[iopia]

it cannot recover the checksum and always shows an error.

I install the firmware with complete erasure.

[deividAlfa]

Mine is also a CB, but works perfectly, I suspect this is a relabeled clone...
Please run this tests and reprt the results:
https://www.eevblog.com/forum/reviews/stm32-oled-digital-soldering-station-for-t12-handle/msg5253981/#msg5253981

[sst311212]

It should be getSystemSettings().

stm32_soldering_iron_controller/Core/Src/user_main.c

Line 134 in 02224b6

setDisplayResRatio(getSettings()->displayResRatio); // Only for ST7565

It should be backupTemp?

stm32_soldering_iron_controller/Drivers/graphics/gui/screens/calibration_screen.c

Line 212 in 02224b6

backupTempUnit=getUserTemperature();

[deividAlfa]

Yep, will fix it later, thanks.

[sst311212]

It breaks selection in combo menu again, currentScroll is not behave something you want.

stm32_soldering_iron_controller/Drivers/graphics/gui/screens/tip_list_screen.c

Line 21 in 02224b6

Selected_Tip = ((comboBox_widget_t*)w->content)->currentScroll;

[deividAlfa]

Oops, fixed. Thanks

[deividAlfa]

Locked as 1.12.4-beta is out.