Unit test failed for #6631

[QuantumMisaka]

Describe the Testing Issue

99% tests passed, 1 tests failed out of 272

Total Test time (real) = 2000.97 sec

The following tests FAILED:
	  1 - integrated_test (Failed)
Errors while running CTest
Output from these tests are in: /__w/abacus-develop/abacus-develop/build/Testing/Temporary/LastTest.log
Use "--rerun-failed --output-on-failure" to re-run the failed cases verbosely.
gmake: *** [Makefile:71: test] Error 8
Error: Process completed with exit code 2.
##[debug]Finishing: Test

Additional Context

Toolchain modification have no change for src, so there should be nothing causing the tests failed

Task list for Issue attackers (only for developers)

• Understand the testing issue described by the developer.
• Review the specific test case, expected and actual results, and any error messages.
• Identify the root cause of the test failure or issue.
• If a possible solution is suggested, evaluate its feasibility and effectiveness.
• Implement a fix for the test failure or issue, or create a new test case if needed.
• Verify that the fix resolves the testing issue and the test case passes.
• Review and update any relevant documentation, such as test plans or user guides.
• Ensure the testing issue is resolved and close the ticket.
• Share any lessons learned or best practices with the team to prevent similar issues in the future.

[ZhouXY-PKU]

1: [ RUN ] 204_NO_KP_NC
1: [----------] non-collinear Fe Anti-ferromagnetic and lcao basis calculation
1: [WARNING ] etotref cal=-6436.21478599 ref=-6436.21478589 deviation=0.00000010

Describe the Testing Issue

99% tests passed, 1 tests failed out of 272

Total Test time (real) = 2000.97 sec

The following tests FAILED:
1 - integrated_test (Failed)
Errors while running CTest
Output from these tests are in: /__w/abacus-develop/abacus-develop/build/Testing/Temporary/LastTest.log
Use "--rerun-failed --output-on-failure" to re-run the failed cases verbosely.
gmake: *** [Makefile:71: test] Error 8
Error: Process completed with exit code 2.
##[debug]Finishing: Test

Additional Context

Toolchain modification have no change for src, so there should be nothing causing the tests failed

Task list for Issue attackers (only for developers)

* [ ]  Understand the testing issue described by the developer.[ ]  Review the specific test case, expected and actual results, and any error messages.[ ]  Identify the root cause of the test failure or issue.[ ]  If a possible solution is suggested, evaluate its feasibility and effectiveness.[ ]  Implement a fix for the test failure or issue, or create a new test case if needed.[ ]  Verify that the fix resolves the testing issue and the test case passes.[ ]  Review and update any relevant documentation, such as test plans or user guides.[ ]  Ensure the testing issue is resolved and close the ticket.[ ]  Share any lessons learned or best practices with the team to prevent similar issues in the future.

1: [ RUN ] 204_NO_KP_NC
1: [----------] non-collinear Fe Anti-ferromagnetic and lcao basis calculation
1: [WARNING ] etotref cal=-6436.21478599 ref=-6436.21478589 deviation=0.00000010