Plex Media Server: how to finish after stuck?

[qbirdee]

Hi,

After having some issues running the PMS script during update (for some reason the update part took almost a day!), the script halted per below:

Setting up vainfo (2.12.0+ds1-1) ...
 ⠇Setting up libigdfcl1:amd64 (1.0.10840-1) ...
 ⠇Setting up intel-opencl-icd (22.14.22890-1) ...
 ⠙Processing triggers for libc-bin (2.35-0ubuntu3.9) ...
 ⠦Processing triggers for man-db (2.10.2-1) ...
  ✔️  Set Up Hardware Acceleration
 ⠹curl: (35) error:0A000126:SSL routines::unexpected eof while reading
 ⠸
[ERROR] in line 32: exit code 0: while executing command tee /usr/share/keyrings/PlexSign.asc > /dev/null
/dev/fd/63: line 72: SPINNER_PID: unbound variable

Any ideas on how to finish off the script, and still retain the hardware acceleration, tweaks, cleanup, etc? I'd rather not spin up the container all over again, as it took a bunch of tries already and each time took forever. I was looking at the script, is it just running the Mr Worf install script?

Thanks in advance!

[tremor021]

You have a network issue, the curl command ends abruptly, which only happens if remote host terminates the connection or your network has a error.

Try restarting your host or check for network problems, adblock or dns issues

[qbirdee]

Very strange, no problems with my network otherwise. I will investigate over the weekend and see if I figure anything out. Thanks for the tip.

…

On Thu, May 1, 2025, 12:37 PM Slaviša Arežina ***@***.***> wrote: You have a network issue, the curl command ends abruptly, which only happens if remote host terminates the connection or your network has a error. Try restarting your host or check for network problems, adblock or dns issues — Reply to this email directly, view it on GitHub <#4166 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQFK64MGEAFK4IW2VZ4SEM324JSWXAVCNFSM6AAAAAB4HZVOOCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBQGY2TSNA> . You are receiving this because you authored the thread.Message ID: <community-scripts/ProxmoxVE/repo-discussions/4166/comments/13006594@ github.com>

[qbirdee]

Well, it turns out it was a USB thumb drive issue. After a bunch of tries, I switched over to an external SATA drive via USB instead, and it installed flawlessly. :) Thanks again for the help!

…

On Thu, May 1, 2025 at 4:32 PM Wuqaas Munir ***@***.***> wrote: Very strange, no problems with my network otherwise. I will investigate over the weekend and see if I figure anything out. Thanks for the tip. On Thu, May 1, 2025, 12:37 PM Slaviša Arežina ***@***.***> wrote: > You have a network issue, the curl command ends abruptly, which only > happens if remote host terminates the connection or your network has a > error. > > Try restarting your host or check for network problems, adblock or dns > issues > > — > Reply to this email directly, view it on GitHub > <#4166 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AQFK64MGEAFK4IW2VZ4SEM324JSWXAVCNFSM6AAAAAB4HZVOOCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBQGY2TSNA> > . > You are receiving this because you authored the thread.Message ID: > <community-scripts/ProxmoxVE/repo-discussions/4166/comments/13006594@ > github.com> >