OctoPrint Camera intergration

[T-Robertson]

Hi There,
I've been using the OctoPrint LXC for sometime but I've never had the camera work with any configuration of USB pass-through, and was wondering if anyone had any luck with getting the camera module to work. Ive tried adding the mount the USB camera to the LXC (as per https://betanet.net/view-post/proxmox-usb-passthrough-in-lxc-containers), and add it as a device pass through in Resources, but nothing seems to allow the device to display. Ive noticed that v4l2-ctl is missing/requested from octoprint when starting the camera module, but installing it and restarting the module doesn't help.
Any help would be appreciated. Cheers

[MickLesk]

You can try the HW Script in ProxmoxVED

[T-Robertson]

Cheers for your advice, unfortunately I found out it was the LXC build. I was comparing an old app installation on truenas (I moved over to proxmox) and was confused why the camera function stopped working. I needed to build mjpg_streamer within the LXC to run the camera. For anyone stuck with the same issue, I found this guide helpful (https://gist.github.com/asad-albadi/ca1577c3f368b45a73b687324a72b1a3)