Rising tides raise all ships, so I wanted to make a good place for anyone to start a build guide. Take the photos listed below and you will have the photos needed for the build guide. Mvp do a find a replace for the items below and you should have something that works.
Find and replace tags:
KEYBOARDNAME- this is the keyboards name : string
QMKKEYBOARDNAME- keyboard path in qmk : string
KMKKEYBOARDNAME- keyboard path in qmk : string
KEYCAPSTYLE- this is the style of keycaps : string (choc, mx, choc or mx)
SOCKETSTYLE- this is the style of sockets : string (choc, mx, choc or mx)
SWITCHSTYLE- this is the style of switches : string (choc, mx, choc or mx)
DIODESTYLE- this is the style of diodes : string (through hole, SMD, SMD or TH)
CONTROLLERSTYLE- this is the style of controller : string (Pro-Micro style, seeed xiao, pico)
CONTROLLERPLACEMENT- this is the style of controller : string (face up, face down, face up on left face down in right side)
PCBCOUNT- this is the number of diodes : int
SWITCHCOUNT- this is the number of switches : int
CONTROLLERCOUNT- this is the number of controllers : int
Images needed:
NULLEDCOMPONETSIMAGE- url
DIODECLOSEUPIMG1- close up of diode orientation:url
DIODECLOSEUPIMG2- close up of diode half soldered:url
DIODECLOSEUPIMG3- diode finished:url
LEDORDERIMG- led order of image:url
LEDORIENTATIONIMG1- perkey:url
LEDORIENTATIONIMG2- underglow:url
LEDCLOSEUPIMG1- perkeypads soldered:url
LEDCLOSEUPIMG2- underglow pads soldered:url
LEDCLOSEUPIMG3- perkey placed:url
LEDCLOSEUPIMG4- underglow placed:url
LEDCLOSEUPIMG5- perkey finished:url
CONTROLLERCLOSEUPIMG1- header pins:url
CONTROLLERCLOSEUPIMG2- placed:url
CONTROLLERCLOSEUPIMG3- finished:url
OLEDCLOSEUPIMG1- placed:url
OLEDCLOSEUPIMG2- one pin soldered:url
OLEDCLOSEUPIMG3- finished:url
TRRSCLOSEUPIMG1- placed:url
TRRSCLOSEUPIMG2- finished:url
RESETCLOSEUPIMG1- one pin soldered:url
RESETCLOSEUPIMG2- finished:url
SOCKETCLOSEUPIMG1- one pad solder:url
SOCKETCLOSEUPIMG2- placed and reflowed:url
SOCKETCLOSEUPIMG3- finished:url