Home

This page is a collection of notes on different hardware, pitfalls, tutorial links, etc.

Arduino

Duemilanove

You have to select UNO in the Blynk App board type, not the DUE (which refers to the Arduino Due).

Mega/UNO/Nano + ESP8266 WiFi Shield

This connection type is very tricky to start with. First of all, it's recommended to buy USB-UART TTL converter which can also supply 1A @ 3.3V. Powering ESP8266 from 3v3 pin on Arduino UNO/Nano/Mega most likely won't work.

ATTENTION! When using Software Serial - you have to switch ESP8266 to baud rate 9600, using this AT command:

AT+UART_DEF=9600,8,1,0,0

Some useful recommendations can be found here: http://community.blynk.cc/t/solved-disconnect-cmd-skipped-etc-issues-my-advice/5362

Schematic

Blynk was tested and working with these AT firmwares:

AT version:0.22.0.0(Mar 20 2015 10:04:26)
SDK version:1.0.0

AT version:0.23.0.0(Apr 24 2015 21:11:01)
SDK version:1.0.1

AT version:0.25.0.0(Jun 12 2015 20:26:28)
SDK version:1.1.2

AT version:0.40.0.0(Aug  8 2015 14:45:58)
SDK version:1.3.0
Ai-Thinker Technology Co.,Ltd.
Build:1.3.0.2 Sep 11 2015 11:48:04

AT version:0.60.0.0(Feb  2 2016 18:43:31)
SDK version:1.5.2(80914727)


AT version:1.0.0.0(Apr 16 2016 13:02:45)
SDK version:1.5.3(aec24ac9)

AT version:1.1.0.0(May 11 2016 18:09:56)
SDK version:1.5.4(baaeaebb)

Connecting Arduino over USB

[TODO]

ESP8266

Generic ESP8266, NodeMCU, Huzzah, WeMos D1, Seeed Wio Link, etc.

ESP8266-based boards can run Blynk directly on the ESP8266 chip, using this board support package: https://github.com/esp8266/Arduino

Tutorials:

Getting started with Blynk: https://learn.sparkfun.com/tutorials/esp8266-thing-development-board-hookup-guide/example-sketch-blink-with-blynk
Getting started with ESP8266: http://www.esp8266.com/wiki/doku.php?id=getting-started-with-the-esp8266

Known possible hardware issues:

ESP8266 can't be powered from 3v3 pin on most Arduino, as it requires >400 mA current.
ESP8266 flash might get broken. The code executes without problem right after flashing, but stops working after first reboot.
This WiFi module can somehow interfere with PIR sensors -> PIR sensor starts producing random values ;)