ATEM Blackmagic Design extra function request

[thedivvy]

Hi,
I have been using Companion for about 6 months now and I am just starting to advance my use of it for extra functionality.

I notice there are limited presets available and it would be helpful to have the following functionality made available please:

Select (without using Macros) multiview options: MultiView, Program View, Channels: 1, 2, 3, etc and allow the active button to reflect a different colour state accordingly

I currently use Macros but this makes colour coding of which button is active very clunky with use of flags and variables.

This causes the additional problem that pressing the physical button changes the state but the StreamDeck doesn't update

Additional: I also change microphones via Macros so have the same problem with potential mismatch between StreamDeck and physical ATEM

It would be fantastic if direct functionality was made available.

Many thanks

[Julusian]

Select (without using Macros) multiview options: MultiView, Program View, Channels: 1, 2, 3, etc and allow the active button to reflect a different colour state accordingly

there are already presets for choosing the source of each multiviewer window:

and some actions (with matching feedbacks) which arent used by the presets

Additional: I also change microphones via Macros

I'm not sure what you mean by this, but there are a bunch of actions and matching feedbacks which allow changing various audio things:

[thedivvy]

Hi,
Firstly, thank you so much for replying and for writing the code for the ATEM.

I can't find the screen you first showed on your reply. These are the only options showing in Presets:

I think there's a crossover in terminology from Blackmagic which doesn't help.
Blackmagic refer to the screen from HDMI out as Multiviewer however, I have only just noticed below the buttons to select different channels to send to HDMI out it says "Video Out".

These are the video ("multiviewer") buttons I want to control directly:

And the microphone buttons lit red:

I just need to turn them on or off.

I hope this clarifies my request or indeed helps you point me in the right direction.

Kind regards
thedivvy

[Julusian]

I can't find the screen you first showed on your reply. These are the only options showing in Presets:

Ah right yeah the boxes of the multiviewer arent customisable on that model, so we dont offer the presets there.

These are the video ("multiviewer") buttons I want to control directly:

OK, those are under the 'Output 1'

And the microphone buttons lit red:

Yeah, there aren't any presets for that currently, but you can add the actions&feedbacks to buttons yourself to achieve this.

The atem: Fairlight Audio: Set input mix option action and atem: Fairlight Audio: Audio mix option feedback are what you are after

[thedivvy]

Hi, That's very helpful info, thank you. I'm about to go away for a bit so I'll take a look on my return. Thanks again for your help Guy Williams EngTech MIET

…

On Sat, 24 May 2025, 22:36 Julian Waller, ***@***.***> wrote: *Julusian* left a comment (bitfocus/companion-module-bmd-atem#375) <#375 (comment)> I can't find the screen you first showed on your reply. These are the only options showing in Presets: Ah right yeah the boxes of the multiviewer arent customisable on that model, so we dont offer the presets there. These are the video ("multiviewer") buttons I want to control directly: OK, those are under the 'Output 1' And the microphone buttons lit red: Yeah, there aren't any presets for that currently, but you can add the actions&feedbacks to buttons yourself to achieve this. The atem: Fairlight Audio: Set input mix option action and atem: Fairlight Audio: Audio mix option feedback are what you are after — Reply to this email directly, view it on GitHub <#375 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BSSMBNXHFXFCWACSHXYWFSL3ADQ5DAVCNFSM6AAAAAB5LGQ6AWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSMBXGA4DQMZZHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>