Skip to content

FAQ

Jump to bottom
mcuee edited this page Jan 5, 2024 · 34 revisions

FAQ for avrdude

How to report an issue to avrdude project?

  1. Create a separate issue for each problem
  2. Tell us what exactly the problem is and how you came to experience it
  • OS
  • Programmer
  • Part
  • How connected/rigged up
  • AVRDUDE binary used and the command line options
  • Output of the command
  • Sometimes it also helps us if you upload a file with the -vv or -vvvv output
  • Sometimes it also helps us if you post the hex file used (if you are okay to share the hex file)
  • What you would have expected to happen

How to read the fuse settings with avrdude 7.0 and later?

If you want to do more, try "terminal mode" (-t). You can browse around interactively through your device, including the fuse values. Non-interactively, it would need -U options, like:

avrdude … -U lfuse:r:-:h -U hfuse:r:-:h -U efuse:r:-:h

optiboot timeout too fast, how to use it effectively in terminal mode?

You can use piping.

echo "dump eeprom 0 0x10" | .\avrdude_pr1121v1 -c arduino -P COM4 -b 115200 -t

3) How to use avrdude for Arduino Nano Every

Please refer to the above issue for different ways to apply the 1200bps touch for the Arduino Nano Every for different OS.

How to write write all or some ELF sections at once?

Please refer to the above issue for the ways to write all ELF sections at once. Step 1: to check the unique memory sections.

avrdude `avrdude -pATmega328p/At | grep ^.ptmm.A | cut -f3 | uniq | sed "s/.*/-U &:w:blink.elf:a/"`

Or

$ avrdude -pm32u4/ot|grep write|cut -f3|uniq
eeprom
flash
lfuse
hfuse
efuse
lock

Step 2: to write the avrdude command based on the output of Step 1.

avrdude -v -pm32u4 -cusbasp -U{eeprom,flash,{l,h,e}fuse,lock}:w:"$1":e "${@:2}"

Flashing boards like Arduino Leonardo can be tricky

Please refer to the following discussion for the tips under different OS.

PR #1507 will address this issue.

New version 3.8 drivers for CH340 under Windows may cause troubles, please downgrade to version 3.5

Please refer to the following issue. It has the driver attached as well.

Clone this wiki locally