Kernel 5.10.0-rc1 eth1

* eth1 OK

Author: avafinger

README.md

@@ -787,7 +787,6 @@ After some testing, the **shutdown** command still not working and you need to u
 
 **issues**
 
-* eth1 freezes the board, cannot boot with eth1 connected to the LAN
 * eth0 bug (using the previous RTL driver)
 
 		Nov  1 13:22:00 nanopi-r2s kernel: [   15.906125] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
@@ -823,10 +822,13 @@ After some testing, the **shutdown** command still not working and you need to u
 
 The problem seems to be the RTL eth0 driver, but the same driver works just fine on NanoPi M4.
 
-* Bootlog with eth0 and eth1 connected to the LAN
+**Bootlog with eth0 and eth1 connected to the LAN**
 
 https://gist.github.com/avafinger/9e60f1d607e3ba66f06158334b3165a0
 
+**Bootlog with eth1 connected to the LAN**
+https://gist.github.com/avafinger/80e4cbcefdc43a51c080ae1a8928498f
+
 	ubuntu@nanopi-r2s:~$ ifconfig
 	eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
 		inet 192.168.254.28  netmask 255.255.0.0  broadcast 192.168.255.255