New PID Setup / Fuji PXG-4 / BT #735
Answered
by
MAKOMO
DB-stoutheart
asked this question in
Q&A
-
|
Hello, So thanks to a bunch of wonderful people on this forum I have been able to get my Fuji PID connected to Artisan. I'm still wading through a few issues though. I did my first roast today, which happened to be a disaster. The biggest issue is my BT curves are not showing up. Clearly I have something set wrong and I'm not sure where to begin as I thought it was correct. My BT probe is set up as an extra device, see screenshots. Second, I've been following Nico's blog post for some of this setup and I'm having a few issues with creating Buttons. For instance in his writeup for PID ON, he used an Artisan Command - "PIDon" but that doesn't do anything on my end. I opened the control window, and clicked PID ON to see if I can verify the command it was using, and this is the message that I get: Any assistance with these issues would be greatly appreciated. Thank you! |
Beta Was this translation helpful? Give feedback.
Answered by
MAKOMO
Jan 5, 2022
Replies: 12 comments 10 replies
-
|
First question on the Delta BT is was a charge event recorded
On Wed, Nov 24, 2021 at 9:38 AM DB-stoutheart ***@***.***> wrote:
Hello,
So thanks to a bunch of wonderful people on this forum I have been able to
get my Fuji PID connected to Artisan. I'm still wading through a few issues
though.
I did my first roast today, which happened to be a disaster. The biggest
issue is my BT curves are not showing up. Clearly I have something set
wrong and I'm not sure where to begin as I thought it was correct. My BT
probe is set up as an extra device, see screenshots.
[image: Screen Shot 2021-11-24 at 11 15 48 AM]
<https://user-images.githubusercontent.com/94983037/143275425-baca1697-8488-449d-bbf5-2b194f3a17a1.png>
[image: Screen Shot 2021-11-24 at 11 16 04 AM]
<https://user-images.githubusercontent.com/94983037/143275444-4404a3de-804a-48b8-b4d0-d9635099aed4.png>
[image: Screen Shot 2021-11-24 at 11 16 38 AM]
<https://user-images.githubusercontent.com/94983037/143275457-13db2678-5128-4e64-8d2f-11a0166909f3.png>
Second, I've been following Nico's blog post for some of this setup and
I'm having a few issues with creating Buttons. For instance in his writeup
for PID ON, he used an Artisan Command - "PIDon" but that doesn't do
anything on my end. I opened the control window, and clicked PID ON to see
if I can verify the command it was using, and this is the message that I
get:
[image: Screen Shot 2021-11-24 at 11 21 49 AM]
<https://user-images.githubusercontent.com/94983037/143278703-29177521-8ec8-4587-9394-10a029306cf0.png>
Any assistance with these issues would be greatly appreciated.
Thank you!
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#735>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIW3J4DYEB2WRD4BIJSYM5LUNUIGTANCNFSM5IWQPQJA>
.
--
…__________________
Michael Herbert, Head Roaster
*Order at www.carefreebuzzbuzz.com <http://www.carefreebuzzbuzz.com>*
Artisan RoasterScope <https://artisan-scope.org/>Team
|
Beta Was this translation helpful? Give feedback.
2 replies
-
|
I'm pretty sure I did, but I'm going to run another batch just to verify. |
Beta Was this translation helpful? Give feedback.
-
|
Okay, just verified, I hit charge, and still nothing... |
Beta Was this translation helpful? Give feedback.
-
|
Look in the last Roast properties to see.
…___________________________
Michael Herbert, CarefreeBuzzBuzz
On Nov 24, 2021, at 9:51 AM, DB-stoutheart ***@***.***> wrote:
I'm pretty sure I did, but I'm going to run another batch just to verify.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
I think you may then need to map it with a symbolic assignment.
https://artisan-roasterscope.blogspot.com/2019/11/symbolic-formulas-basics-new-variables.html
…___________________________
Michael Herbert, CarefreeBuzzBuzz
On Nov 24, 2021, at 10:09 AM, DB-stoutheart ***@***.***> wrote:
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Exactly! You need to map your extra device reading the BT signal (fist channel of 3rd extra device) to the BT channel. Add Y7 in the "Symb ET/BT" tab under "BT Y(x)"
|
Beta Was this translation helpful? Give feedback.
-
|
Thank you. Do I need to add "x/4" to the Curves -> ROR symbolic
assignments as well under deltaBT Y(x)?
…On Wed, Nov 24, 2021 at 12:35 PM Marko Luther ***@***.***> wrote:
Exactly! You need to map your extra device reading the BT signal (fist
channel of 3rd extra device) to the BT channel. Add Y7 in the "Symb ET/BT"
tab under "BT Y(x)"
[image: Screenshot 2021-11-24 at 18 33 23]
<https://user-images.githubusercontent.com/13909011/143287663-5858d1ce-b8c5-4ed2-adae-48cca4163113.png>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#735 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AWUVG7KYXRORW4USFPLA2YDUNUO7DANCNFSM5IWQPQJA>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Okay, hopefully that all works correctly now - THANK YOU! (I need to play with the symbolic formulas more, those look like they could be helpful). On to my second question, BUTTONS. I've been following Nico's blog post for some of this setup and |
Beta Was this translation helpful? Give feedback.
5 replies
-
|
Which Artisan version are you using? |
Beta Was this translation helpful? Give feedback.
-
|
2.4.6 - Which I presume is the latest. |
Beta Was this translation helpful? Give feedback.
-
|
Seem to be a bug. A work around until the next version is released with a fix for this is to untick the "MODBUS port" flag in the first tab of the Config >> Devices dialog. |
Beta Was this translation helpful? Give feedback.
-
|
Okay, but that still doesn't seem to solve the issue with buttons. If I try |
Beta Was this translation helpful? Give feedback.
-
|
Could you please export your Artisan settings as artisan-settings.aset file (menu Help > Save Settings), rename it into artisan-settings.txt and attach it here via drag-and-drop. I will try to duplicate this using my Fuji simulator. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for taking a look, I appreciate it.
On Thu, Nov 25, 2021 at 12:26 AM Marko Luther ***@***.***> wrote:
Could you please export your Artisan settings as artisan-settings.aset
file (menu Help > Save Settings), rename it into artisan-settings.txt and
attach it here via drag-and-drop. I will try to duplicate this using my
Fuji simulator.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#735 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AWUVG7L5DIDC6HIRXWEXCEDUNXCITANCNFSM5IWQPQJA>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
[General]
***@***.***(\x1\xd9\xd0\xcb\0\x3\0\0\xff\xff\xff\xf8\xff\xff\xff\xf8\0\0\n\a\0\0\x5\x7f\0\0\x3\xc0\0\0\x1\xcc\0\0\x6\xdf\0\0\x4\x13\0\0\0\0\x2\0\0\0\n\0\0\0\0\0\0\0\0\x16\0\0\t\xff\0\0\x5w)
Mode=F
fmt_data_RoR=false
detectBackgroundEventTime=20
backgroundReproduce=false
backgroundReproduceBeep=false
backgroundPlaybackEvents=false
backgroundPlaybackDROP=false
replayType=0
Phases=200, 300, 390, 450
phasesbuttonflag=false
phasesfromBackgroundflag=false
watermarks=true
phasesLCDs=true
phasesLCDmode=1
phasesLCDmode_l=1, 1, 1
phasesLCDmode_all=false, false, false
***@***.***()
autoDry=true
autoFCs=false
Statistics=1, 1, 0, 1, 1, 0, 1
AnalysisResultsLoc=0.49, 0.5
SegmentResultsLoc=0.5, 0.5
analysisstartchoice=1
analysisoffset=180
curvefitstartchoice=0
curvefitoffset=180
segmentsamplesthreshold=3
segmentdeltathreshold=0.6
AUCbegin=1
AUCbase=212
AUCbaseFlag=false
AUCtarget=640
AUCtargetFlag=false
AUCguideFlag=true
AUClcdFlag=true
AUCLCDmode=0
AUCshowFlag=true
AmbientTempSource=0
Delay=500
Oversampling=true
KeepON=true
flagOpenCompleted=false
ExtraEventSamplingDelay=0
***@***.***(\0\0\0\b\0\0\0#\0\0\0\x4\0y\0t\0\0\0\n\0\0\0\xe\0#\0\x34\0\x30\0\x34\0\x30\0\x34\0\x30\0\0\0\f\0y\0l\0\x61\0\x62\0\x65\0l\0\0\0\n\0\0\0\b\0\x30\0.\0\x32\0\x30\0\0\0\x4\0x\0t\0\0\0\n\0\0\0\n\0g\0r\0\x65\0\x65\0n\0\0\0\f\0x\0l\0\x61\0\x62\0\x65\0l\0\0\0\n\0\0\0\b\0\x30\0.\0\x32\0\x30\0\0\0\x14\0w\0\x61\0t\0\x65\0r\0m\0\x61\0r\0k\0s\0\0\0\n\0\0\0\f\0y\0\x65\0l\0l\0o\0w\0\0\0\n\0t\0i\0t\0l\0\x65\0\0\0\n\0\0\0\b\0\x30\0.\0\x32\0\x30\0\0\0\x12\0t\0i\0m\0\x65\0g\0u\0i\0\x64\0\x65\0\0\0\n\0\0\0\xe\0#\0\x30\0\x41\0\x35\0\x43\0\x39\0\x30\0\0\0\b\0t\0\x65\0x\0t\0\0\0\n\0\0\0\n\0\x62\0l\0\x61\0\x63\0k\0\0\0$\0s\0t\0\x61\0t\0s\0\x61\0n\0\x61\0l\0y\0s\0i\0s\0\x62\0k\0g\0n\0\x64\0\0\0\n\0\0\0\xe\0#\0\x46\0\x46\0\x46\0\x46\0\x46\0\x46\0\0\0 \0s\0p\0\x65\0\x63\0i\0\x61\0l\0\x65\0v\0\x65\0n\0t\0t\0\x65\0x\0t\0\0\0\n\0\0\0\xe\0#\0\x46\0\x46\0\x46\0\x46\0\x46\0\x46\0\0\0\x1e\0s\0p\0\x65\0\x63\0i\0\x61\0l\0\x65\0v\0\x65\0n\0t\0\x62\0o\0x\0\0\0\n\0\0\0\xe\0#\0\x46\0\x46\0\x35\0\x38\0\x37\0\x31\0\0\0\n\0r\0\x65\0\x63\0t\0\x35\0\0\0\n\0\0\0\x12\0l\0i\0g\0h\0t\0g\0r\0\x65\0y\0\0\0\n\0r\0\x65\0\x63\0t\0\x34\0\0\0\n\0\0\0\x12\0l\0i\0g\0h\0t\0\x62\0l\0u\0\x65\0\0\0\n\0r\0\x65\0\x63\0t\0\x33\0\0\0\n\0\0\0\xe\0#\0\x39\0\x39\0\x36\0\x36\0\x33\0\x33\0\0\0\n\0r\0\x65\0\x63\0t\0\x32\0\0\0\n\0\0\0\f\0o\0r\0\x61\0n\0g\0\x65\0\0\0\n\0r\0\x65\0\x63\0t\0\x31\0\0\0\n\0\0\0\n\0g\0r\0\x65\0\x65\0n\0\0\0\xe\0m\0\x65\0t\0t\0\x65\0x\0t\0\0\0\n\0\0\0\xe\0#\0\x46\0\x46\0\x46\0\x46\0\x46\0\x46\0\0\0\f\0m\0\x65\0t\0\x62\0o\0x\0\0\0\n\0\0\0\xe\0#\0\x43\0\x43\0\x30\0\x46\0\x35\0\x30\0\0\0\x10\0m\0\x65\0s\0s\0\x61\0g\0\x65\0s\0\0\0\n\0\0\0\n\0\x62\0l\0\x61\0\x63\0k\0\0\0\xe\0m\0\x61\0r\0k\0\x65\0r\0s\0\0\0\n\0\0\0\n\0\x62\0l\0\x61\0\x63\0k\0\0\0\x18\0l\0\x65\0g\0\x65\0n\0\x64\0\x62\0o\0r\0\x64\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x41\0\x39\0\x41\0\x39\0\x41\0\x39\0\0\0\x10\0l\0\x65\0g\0\x65\0n\0\x64\0\x62\0g\0\0\0\n\0\0\0\xe\0#\0\x46\0\x46\0\x46\0\x46\0\x46\0\x46\0\0\0\b\0g\0r\0i\0\x64\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\x4\0\x65\0t\0\0\0\n\0\0\0\xe\0#\0\x66\0\x66\0\x30\0\x30\0\x30\0\x30\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x65\0t\0\0\0\n\0\0\0\xe\0#\0\x66\0\x66\0\x61\0\x35\0\x30\0\x30\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x62\0t\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x66\0\x66\0\0\0\f\0\x63\0\x61\0n\0v\0\x61\0s\0\0\0\n\0\0\0\b\0N\0o\0n\0\x65\0\0\0\x4\0\x62\0t\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x37\0\x66\0\0\0\x16\0\x62\0g\0\x65\0v\0\x65\0n\0t\0t\0\x65\0x\0t\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x30\0\x30\0\0\0\x1a\0\x62\0g\0\x65\0v\0\x65\0n\0t\0m\0\x61\0r\0k\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x37\0\x46\0\x37\0\x46\0\x37\0\x46\0\0\0\x14\0\x62\0\x61\0\x63\0k\0g\0r\0o\0u\0n\0\x64\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\x10\0\x61\0u\0\x63\0g\0u\0i\0\x64\0\x65\0\0\0\n\0\0\0\xe\0#\0\x30\0\x43\0\x36\0\x41\0\x41\0\x36\0\0\0\xe\0\x61\0u\0\x63\0\x61\0r\0\x65\0\x61\0\0\0\n\0\0\0\xe\0#\0\x37\0\x36\0\x37\0\x36\0\x37\0\x36\0\0\0\x18\0\x61\0n\0\x61\0l\0y\0s\0i\0s\0m\0\x61\0s\0k\0\0\0\n\0\0\0\xe\0#\0\x42\0\x41\0\x42\0\x41\0\x42\0\x41\0\0\0\n\0\x43\0l\0i\0n\0\x65\0\0\0\n\0\0\0\b\0\x62\0l\0u\0\x65)
***@***.***(\0\0\0\b\0\0\0\x3\0\0\0$\0s\0t\0\x61\0t\0s\0\x61\0n\0\x61\0l\0y\0s\0i\0s\0\x62\0k\0g\0n\0\x64\0\0\0\x6?\xf0\0\0\0\0\0\0\0\0\0\x10\0l\0\x65\0g\0\x65\0n\0\x64\0\x62\0g\0\0\0\x6?\xd9\x99\x99\x99\x99\x99\x9a\0\0\0\x18\0\x61\0n\0\x61\0l\0y\0s\0i\0s\0m\0\x61\0s\0k\0\0\0\x6?\xd9\x99\x99\x99\x99\x99\x9a)
***@***.***(\0\0\0\b\0\0\0\b\0\0\0\n\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\n\0\x62\0l\0\x61\0\x63\0k\0\0\0\x4\0s\0v\0\0\0\n\0\0\0\xe\0#\0\x34\0\x30\0\x34\0\x30\0\x34\0\x30\0\0\0 \0s\0l\0o\0w\0\x63\0o\0o\0l\0i\0n\0g\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x46\0\x38\0\x46\0\x38\0\x46\0\x38\0\0\0\xe\0r\0s\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x46\0\x38\0\x46\0\x38\0\x46\0\x38\0\0\0\x4\0\x65\0t\0\0\0\n\0\0\0\xe\0#\0\x44\0\x39\0\x44\0\x39\0\x44\0\x39\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x65\0t\0\0\0\n\0\0\0\xe\0#\0\x42\0\x46\0\x42\0\x46\0\x42\0\x46\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x62\0t\0\0\0\n\0\0\0\xe\0#\0\x42\0\x46\0\x42\0\x46\0\x42\0\x46\0\0\0\x4\0\x62\0t\0\0\0\n\0\0\0\xe\0#\0\x44\0\x39\0\x44\0\x39\0\x44\0\x39)
***@***.***(\0\0\0\b\0\0\0\b\0\0\0\n\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\x4\0s\0v\0\0\0\n\0\0\0\f\0y\0\x65\0l\0l\0o\0w\0\0\0 \0s\0l\0o\0w\0\x63\0o\0o\0l\0i\0n\0g\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x43\0\x43\0\x30\0\x44\0\x35\0\x30\0\0\0\xe\0r\0s\0t\0i\0m\0\x65\0r\0\0\0\n\0\0\0\xe\0#\0\x31\0\x38\0\x37\0\x41\0\x42\0\x33\0\0\0\x4\0\x65\0t\0\0\0\n\0\0\0\x6\0r\0\x65\0\x64\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x65\0t\0\0\0\n\0\0\0\f\0o\0r\0\x61\0n\0g\0\x65\0\0\0\xe\0\x64\0\x65\0l\0t\0\x61\0\x62\0t\0\0\0\n\0\0\0\b\0\x62\0l\0u\0\x65\0\0\0\x4\0\x62\0t\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x37\0\x46)
ETBColor=red
BTBColor=#00007f
ETBdeltaColor=orange
BTBdeltaColor=blue
BackgroundAlpha=0.2
readingslcdsflags=1, 1, 1
Flavors=Acidity, Aftertaste, Clean Cup, Head, Fragrance, Sweetness, Aroma, Balance, Body
flavorstartangle=90
colorsystem=0
sound=0
logofilename=
logoimgalpha=2
logoimgflag=false
filterDropOuts=true
dropSpikes=false
dropDuplicates=false
dropDuplicatesLimit=0.3
optimalSmoothing=true
polyfitRoRcalc=true
swapETBT=false
minmaxLimits=false
minLimit=50
maxLimit=1000
foregroundShowFullflag=true
curvefilter=1
ETcurve=true
BTcurve=true
ETlcd=true
BTlcd=false
swaplcds=false
transMappingMode=0
organization_setup=
operator_setup=Stout Heart Coffee
roastertype_setup=Phidget Databridge
roastersize_setup=0
roasterheating_setup=0
drumspeed_setup=
profilepath=C:/Users/dustin/Documents/ROASTS/
settingspath=C:/Users/dustin/Documents/ROASTS/artisan-settings.txt
wheelpath=
autosavepath=C:/Users/dustin/Documents/ROASTS
autosavealsopath=C:/Users/dustin/Documents/ROASTS
simulatorpath=None
externalprogram=test.py
externaloutprogram=out.py
externaloutprogramFlag=false
ChannelTares=0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
BTfunction=Y7
ETfunction=
DeltaBTfunction=x/4
DeltaETfunction=
resetqsettings=0
plotcurves=, , , , , , , ,
plotcurvecolor=black, black, black, black, black, black, black, black, black
compareAlignEvent=0
compareEvents=0
compareET=false
compareBT=true
compareDeltaET=false
compareDeltaBT=true
compareMainEvents=true
autosaveflag=1
autosaveaddtorecentfilesflag=false
autosavepdf=true
autosaveimageformat=PDF
autosaveprefix=~batch_~title_~datetime_long
LargeLCDs=false
LargeDeltaLCDs=false
LargePIDLCDs=false
LargeExtraLCDs=false
LargePhasesLCDs=false
titleshowalways=false
roastpropertiesflag=1
roastpropertiesAutoOpenFlag=1
roastpropertiesAutoOpenDropFlag=0
customflavorlabels=Acidity, Aftertaste, Clean Cup, Head, Fragrance, Sweetness, Aroma, Balance, Body
appearance=fusion
dpi=120
***@***.***(\0\0\0\t\0\0\0\x1\0\0\0\b\0\0\0\x17\0\0\0\x14\0w\0\x65\0i\0g\0h\0t\0U\0n\0i\0t\0\0\0\n\0\0\0\x2\0g\0\0\0\x10\0w\0\x65\0i\0g\0h\0t\0I\0n\0\0\0\x6@\x84P\0\0\0\0\0\0\0\0\x14\0v\0o\0l\0u\0m\0\x65\0U\0n\0i\0t\0\0\0\n\0\0\0\x2\0l\0\0\0\x10\0v\0o\0l\0u\0m\0\x65\0I\0n\0\0\0\x6\0\0\0\0\0\0\0\0\0\0\0\n\0t\0i\0t\0l\0\x65\0\0\0\n\0\0\0<\0H\0o\0n\0\x64\0u\0r\0\x61\0s\0 \0\x43\0\x61\0s\0\x61\0s\0 \0Q\0u\0\x65\0m\0\x61\0\x64\0\x61\0s\0 \0\x43\0\x61\0t\0r\0\x61\0\x63\0\0\0\x12\0r\0o\0\x61\0s\0t\0U\0U\0I\0\x44\0\0\0\n\0\0\0@\0\x64\0\x38\0\x39\0\x35\0\x37\0\x62\0\x30\0\x31\0\x33\0\x65\0\x32\0\x34\0\x34\0\x36\0\x63\0\x37\0\x61\0\x32\0\x32\0\x32\0\x64\0\x33\0\x35\0\x34\0\x36\0\x38\0\x61\0\x35\0\x65\0\x30\0\x66\0\x37\0\0\0 \0p\0l\0u\0s\0_\0s\0t\0o\0r\0\x65\0_\0l\0\x61\0\x62\0\x65\0l\0\0\0\n\0\0\0$\0S\0t\0o\0u\0t\0 \0H\0\x65\0\x61\0r\0t\0 \0\x43\0o\0\x66\0\x66\0\x65\0\x65\0\0\0\x14\0p\0l\0u\0s\0_\0s\0t\0o\0r\0\x65\0\0\0\n\0\0\0\n\0L\0\x31\0\x30\0\x30\0\x30\0\0\0\"\0p\0l\0u\0s\0_\0\x63\0o\0\x66\0\x66\0\x65\0\x65\0_\0l\0\x61\0\x62\0\x65\0l\0\0\0\n\0\0\0<\0H\0o\0n\0\x64\0u\0r\0\x61\0s\0 \0\x43\0\x61\0s\0\x61\0s\0 \0Q\0u\0\x65\0m\0\x61\0\x64\0\x61\0s\0 \0\x43\0\x61\0t\0r\0\x61\0\x63\0\0\0\x16\0p\0l\0u\0s\0_\0\x63\0o\0\x66\0\x66\0\x65\0\x65\0\0\0\n\0\0\0\n\0\x43\0\x31\0\x30\0\x30\0\x30\0\0\0,\0p\0l\0u\0s\0_\0\x62\0l\0\x65\0n\0\x64\0_\0s\0p\0\x65\0\x63\0_\0l\0\x61\0\x62\0\x65\0l\0s\0\0\0\0\xff\xff\xff\xff\0\0\0\x1e\0p\0l\0u\0s\0_\0\x62\0l\0\x65\0n\0\x64\0_\0s\0p\0\x65\0\x63\0\0\0\0\xff\xff\xff\xff\0\0\0 \0p\0l\0u\0s\0_\0\x62\0l\0\x65\0n\0\x64\0_\0l\0\x61\0\x62\0\x65\0l\0\0\0\0\xff\xff\xff\xff\0\0\0\x18\0p\0l\0u\0s\0_\0\x61\0\x63\0\x63\0o\0u\0n\0t\0\0\0\n\0\0\0\x34\0\x64\0u\0s\0t\0i\0n\0@\0s\0t\0o\0u\0t\0h\0\x65\0\x61\0r\0t\0\x63\0o\0\x66\0\x66\0\x65\0\x65\0.\0\x63\0o\0\0\0\x1a\0m\0o\0i\0s\0t\0u\0r\0\x65\0G\0r\0\x65\0\x65\0n\0\0\0\x6\0\0\0\0\0\0\0\0\0\0\0\x1a\0\x64\0\x65\0n\0s\0i\0t\0y\0W\0\x65\0i\0g\0h\0t\0\0\0\x6\0\0\0\0\0\0\0\0\0\0\0\x16\0\x63\0o\0l\0o\0r\0S\0y\0s\0t\0\x65\0m\0\0\0\x2\0\0\0\0\0\0\0\n\0\x62\0\x65\0\x61\0n\0s\0\0\0\n\0\0\0<\0H\0o\0n\0\x64\0u\0r\0\x61\0s\0 \0\x43\0\x61\0s\0\x61\0s\0 \0Q\0u\0\x65\0m\0\x61\0\x64\0\x61\0s\0 \0\x43\0\x61\0t\0r\0\x61\0\x63\0\0\0\x18\0\x62\0\x65\0\x61\0n\0S\0i\0z\0\x65\0_\0m\0i\0n\0\0\0\x2\0\0\0\0\0\0\0\x18\0\x62\0\x65\0\x61\0n\0S\0i\0z\0\x65\0_\0m\0\x61\0x\0\0\0\x2\0\0\0\0\0\0\0\x16\0\x62\0\x61\0t\0\x63\0h\0p\0r\0\x65\0\x66\0i\0x\0\0\0\n\0\0\0\0\0\0\0\xe\0\x62\0\x61\0t\0\x63\0h\0n\0r\0\0\0\x2\0\0\0\0\0\0\0\x14\0\x62\0\x61\0\x63\0k\0g\0r\0o\0u\0n\0\x64\0\0\0\0\xff\xff\xff\xff)"
lastLoadedProfile=
lastLoadedBackground=
[System]
artisan_version=2.4.6
artisan_revision=f1b8e57
artisan_build=2
artisan_os=Windows
artisan_os_version=7
[Device]
device_logging=true
id=0
phidget1048_types=1, 1, 1, 1
phidget1048_async=true, true, true, false
phidget1048_changeTriggers=0, 0, 0, 0
phidget1048_dataRate=32
phidget1046_async=false, false, false, false
phidget1046_gain=1, 1, 1, 1
phidget1046_formula=1, 1, 1, 1
phidget1046_dataRate=64
phidget1045_async=false
phidget1045_changeTrigger=1
phidget1045_emissivity=1
phidget1045_dataRate=256
phidget1200_formula=0
phidget1200_wire=0
phidget1200_async=false
phidget1200_changeTrigger=0.2
phidget1200_dataRate=250
phidget1200_2_formula=0
phidget1200_2_wire=0
phidget1200_2_async=false
phidget1200_2_changeTrigger=0.2
phidget1200_2_dataRate=250
phidgetDAQ1400_powerSupply=1
phidgetDAQ1400_inputMode=0
phidgetRemoteFlag=false
phidgetServerID=
phidgetPassword=
phidgetPort=5661
phidgetRemoteOnlyFlag=false
phidget1018_async=false, false, false, false, false, false, false, false
phidget1018_ratio=false, false, false, false, false, false, false, false
phidget1018_dataRates=64, 64, 64, 64, 64, 64, 64, 64
phidget1018_changeTriggers=10, 10, 10, 10, 10, 10, 10, 10
controlETpid=0, 1
readBTpid=2, 1
arduinoETChannel=1
arduinoBTChannel=2
arduinoATChannel=None
ArduinoFILT=70, 70, 70, 70
useModbusPort=false
showFujiLCDs=true
PIDbuttonflag=true
Controlbuttonflag=true
yoctoRemoteFlag=false
yoctoServerID=127.0.0.1
YOCTO_emissivity=1
YOCTO_async=false, false
YOCTO_dataRate=256
ambient_temperature_device=0
ambient_humidity_device=0
ambient_pressure_device=0
elevation=0
[events]
eventsbuttonflag=1
minieventsflag=1
eventsGraphflag=2
eventsshowflag=1
clampEvents=false
renderEventsDescr=true
eventslabelschars=7
annotationsflag=1
showeventsonbt=true
showEtypes=false, false, false, true, false
autoCharge=true
autoDrop=true
markTP=true
EvalueColor=#4895ce, #49b160, #800080, #910113
EvalueTextColor=white, #FFFFFF, white, #FFFFFF
EvalueMarker=o, s, h, o
Evaluelinethickness=1, 1, 1, 1
EvalueMarkerSize=4, 4, 4, 5
Evaluealpha=0.8, 0.8, 0.8, 0.8
specialeventannotations=, , , "Gas ~E @ ~Y2~degmode "
specialeventannovisibilities=0, 0, 0, 1
overlappct=100
[Tare]
***@***.***()
***@***.***()
idx=-1
[SerialPort]
comport=COM2
baudrate=9600
bytesize=8
stopbits=1
parity=N
timeout=1
[WebSocket]
host=127.0.0.1
port=80
path=WebSocket
machineID=0
connect_timeout=4
request_timeout=0.5
reconnect_interval=2
id_node=id
machine_node=roasterID
command_node=command
data_node=data
pushMessage_node=pushMessage
request_data_command=getData
charge_message=startRoasting
drop_message=endRoasting
STARTonCHARGE=false
OFFonDROP=false
addEvent_message=addEvent
event_node=event
DRY_node=colorChangeEvent
FCs_node=firstCrackBeginningEvent
FCe_node=firstCrackEndEvent
SCs_node=secondCrackBeginningEvent
SCe_node=secondCrackEndEvent
channel_requests=, , , , , , , , ,
channel_nodes=, , , , , , , , ,
channel_modes=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
[S7]
area=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
db_nr=1, 1, 1, 1, 1, 1, 1, 1, 1, 1
start=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
type=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
mode=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
div=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
host=127.0.0.1
port=102
rack=0
slot=0
PID_area=0
PID_db_nr=0
PID_SV_register=0
PID_p_register=0
PID_i_register=0
PID_d_register=0
PID_OFF_action=
PID_ON_action=
PIDmultiplier=0
SVtype=0
SVmultiplier=0
optimizer=true
fetch_max_blocks=false
[Modbus]
comport=COM2
baudrate=9600
bytesize=8
stopbits=1
parity=N
timeout=2
PID_slave_ID=1
PID_SV_register=240
PID_p_register=241
PID_i_register=242
PID_d_register=243
PID_OFF_action=
PID_ON_action=
input1slave=1
input1register=0
input1float=false
input1bcd=false
input1code=3
input1div=0
input1mode=F
input1FloatsAsInt=false
input1BCDsAsInt=false
input2slave=0
input2register=0
input2float=false
input2bcd=false
input2code=3
input2div=1
input2mode=F
input2FloatsAsInt=false
input2BCDsAsInt=false
input3slave=0
input3register=0
input3float=false
input3bcd=false
input3code=3
input3div=1
input3mode=C
input3FloatsAsInt=false
input3BCDsAsInt=false
input4slave=0
input4register=0
input4float=false
input4bcd=false
input4code=3
input4div=1
input4mode=C
input4FloatsAsInt=false
input4BCDsAsInt=false
input5slave=0
input5register=0
input5float=false
input5bcd=false
input5code=3
input5div=1
input5mode=C
input5FloatsAsInt=false
input5BCDsAsInt=false
input6slave=0
input6register=0
input6float=false
input6bcd=false
input6code=3
input6div=1
input6mode=C
input6FloatsAsInt=false
input6BCDsAsInt=false
input7slave=0
input7register=0
input7float=false
input7bcd=false
input7code=3
input7div=1
input7mode=C
input7FloatsAsInt=false
input7BCDsAsInt=false
input8slave=0
input8register=0
input8float=false
input8bcd=false
input8code=3
input8div=1
input8mode=C
input8FloatsAsInt=false
input8BCDsAsInt=false
PIDmultiplier=2
SVmultiplier=1
littleEndianFloats=false
wordorderLittle=true
optimizer=true
fetch_max_blocks=true
type=0
host=127.0.0.1
port=502
reset_socket=false
[Scale]
device=None
comport=/dev/cu.usbserial-FTFKDA5O
baudrate=19200
bytesize=8
stopbits=1
parity=N
timeout=1
[Color]
device=None
comport=/dev/cu.usbserial-FTFKDA5O
baudrate=115200
bytesize=8
stopbits=1
parity=N
timeout=2
[ArduinoPID]
pidOnCHARGE=false
loadRampSoakFromProfile=false
loadRampSoakFromBackground=false
svLabel=
svValues=0, 0, 0, 0, 0, 0, 0, 0
svRamps=0, 0, 0, 0, 0, 0, 0, 0
svSoaks=0, 0, 0, 0, 0, 0, 0, 0
svActions=-1, -1, -1, -1, -1, -1, -1, -1
svBeeps=false, false, false, false, false, false, false, false
svDescriptions=, , , , , , ,
svSlider=false
svButtons=true
svMode=2
svLookahead=0
dutySteps=1
svSliderMin=0
svSliderMax=480
svValue=390
dutyMin=-100
dutyMax=100
pidKp=20
pidKi=0.04
pidKd=0
pidSource=1
pidCycle=1000
pidPositiveTarget=0
pidNegativeTarget=0
invertControl=false
pOnE=true
RS_svLabel0=
RS_svValues0=0, 0, 0, 0, 0, 0, 0, 0
RS_svRamps0=0, 0, 0, 0, 0, 0, 0, 0
RS_svSoaks0=0, 0, 0, 0, 0, 0, 0, 0
RS_svActions0=-1, -1, -1, -1, -1, -1, -1, -1
RS_svBeeps0=false, false, false, false, false, false, false, false
RS_svDescriptions0=, , , , , , ,
RS_svLabel1=
RS_svValues1=0, 0, 0, 0, 0, 0, 0, 0
RS_svRamps1=0, 0, 0, 0, 0, 0, 0, 0
RS_svSoaks1=0, 0, 0, 0, 0, 0, 0, 0
RS_svActions1=-1, -1, -1, -1, -1, -1, -1, -1
RS_svBeeps1=false, false, false, false, false, false, false, false
RS_svDescriptions1=, , , , , , ,
RS_svLabel2=
RS_svValues2=0, 0, 0, 0, 0, 0, 0, 0
RS_svRamps2=0, 0, 0, 0, 0, 0, 0, 0
RS_svSoaks2=0, 0, 0, 0, 0, 0, 0, 0
RS_svActions2=-1, -1, -1, -1, -1, -1, -1, -1
RS_svBeeps2=false, false, false, false, false, false, false, false
RS_svDescriptions2=, , , , , , ,
[PXR]
autotuning=0
segment1sv=100
segment1ramp=3
segment1soak=0
segment2sv=100
segment2ramp=3
segment2soak=0
segment3sv=100
segment3ramp=3
segment3soak=0
segment4sv=100
segment4ramp=3
segment4soak=0
segment5sv=100
segment5ramp=3
segment5soak=0
segment6sv=100
segment6ramp=3
segment6soak=0
segment7sv=100
segment7ramp=3
segment7soak=0
segment8sv=100
segment8ramp=3
segment8soak=0
rampsoakmode=0
rampsoak=0
rampsoakpattern=0
controlmethod=0
sv0=0
runstandby=0
p=5
i=240
d=60
decimalposition=1
svlowerlimit=0
svupperlimit=0
pvinputtype=3
pv%3F=0
sv%3F=0
segment%3F=0
mv1=0
[PXG4]
manual=0
runstandby=1
autotuning=0
rampsoak=0
selectsv=1
selectpid=0
p=5
i=240
d=60
sv1=160
p1=8
i1=24
d1=4
sv2=396.4
p2=5
i2=240
d2=60
sv3=360
p3=5
i3=240
d3=60
sv4=325
p4=5
i4=240
d4=60
sv5=300
p5=5
i5=240
d5=60
sv6=275
p6=5
i6=240
d6=60
sv7=20
p7=5
i7=240
d7=60
selectedpid=1
timeunits=1
segment1sv=270
segment1ramp=180
segment1soak=0
segment2sv=300
segment2ramp=180
segment2soak=0
segment3sv=350
segment3ramp=180
segment3soak=0
segment4sv=400
segment4ramp=180
segment4soak=0
segment5sv=530
segment5ramp=180
segment5soak=0
segment6sv=530
segment6ramp=180
segment6soak=0
segment7sv=540
segment7ramp=180
segment7soak=0
segment8sv=540
segment8ramp=180
segment8soak=0
segment9sv=550
segment9ramp=180
segment9soak=0
segment10sv=550
segment10ramp=180
segment10soak=0
segment11sv=560
segment11ramp=180
segment11soak=0
segment12sv=560
segment12ramp=180
segment12soak=0
segment13sv=570
segment13ramp=180
segment13soak=0
segment14sv=570
segment14ramp=180
segment14soak=0
segment15sv=580
segment15ramp=180
segment15soak=0
segment16sv=580
segment16ramp=180
segment16soak=0
rampsoakmode=0
rampsoakpattern=6
stat=41561
pvinputtype=3
pvinputlowerlimit=0
pvinputupperlimit=9999
decimalposition=1
unitdisplay=1
rampslopeunit=1
controlmethod=0
pv%3F=31001
sv%3F=0
alarm%3F=31007
fault%3F=31008
stat%3F=31041
mv1=0
followBackground=false
lookahead=10
[deltaDTA]
pv=0
sv=100
p=5
i=240
d=60
duty=0
sensortype=0
controlmethod=0
units=1
controlsetting=1
error=0
[RoC]
DeltaET=true
DeltaBT=true
DeltaETlcd=true
DeltaBTlcd=true
deltaETfilter=1
deltafilter=1
DeltaETspan=15
DeltaSpan=15
LCDdecimalplaces=1
statisticsmode=1
swapdeltalcds=false
[DefaultButtons]
buttonvisibility=true, true, true, false, false, false, true, false
buttonactions=18, 0, 0, 0, 0, 0, 0, 0
buttonactionstrings=PIDon, , , , , , PIDoff,
extrabuttonactions=12, 0, 0
extrabuttonactionstrings=, ,
xextrabuttonactions=0, 0
xextrabuttonactionstrings=,
[HUD]
Projection=true
ProjectionMode=0
ETtarget=300
BTtarget=200
ET2target=350
BT2target=250
Mode=0
hudETpid=5, 240, 60
buttonFlag=false
[Style]
patheffects=2
graphstyle=0
graphfont=0
ETname=ET
BTname=BT
[Sound]
Beep=0
[Axis]
loadAxisFromProfile=false
xmin=-30
xmax=600
ymax=700
ymin=0
zmax=70
zmin=0
resetmaxtime=600
lockmax=false
locktimex=false
autotimex=false
autodeltaxET=false
autodeltaxBT=false
locktimex_start=-60
locktimex_end=1082
legendloc=4
chargemintime=-30
temp_grid=false
time_grid=false
[EnergyUse]
loadlabels_setup=, , ,
loadratings_setup=0, 0, 0, 0
ratingunits_setup=0, 0, 0, 0
sourcetypes_setup=0, 0, 0, 0
load_etypes_setup=0, 0, 0, 0
presssure_percents_setup=false, false, false, false
loadevent_zeropcts_setup=0, 0, 0, 0
loadevent_hundpcts_setup=100, 100, 100, 100
preheatDuration_setup=0
preheatenergies_setup=0, 0, 0, 0
betweenbatchDuration_setup=0
betweenbatchenergies_setup=0, 0, 0, 0
coolingDuration_setup=0
coolingenergies_setup=0, 0, 0, 0
betweenbatch_after_preheat_setup=true
electricEnergyMix_setup=0
energyresultunit_setup=0
[RoastProperties]
machinesetup=USB 1048 Databridge 2xTC
beansize=0
beansize_min=0
beansize_max=0
[XT]
color=green
color2=#404040
index=0
index2=0
[Units]
weight=g
volume=l
densityweight=g
densityvolume=l
volumeCalcUnit=0
[Alarms]
alarmsetlabel=
alarmflag=0, 0, 0, 0, 0, 0
alarmguard=-1, -1, -1, -1, -1, -1
alarmnegguard=-1, -1, -1, -1, -1, -1
alarmtime=0, 8, 8, 8, 8, 8
alarmoffset=60, 0, 0, 0, 0, 0
alarmcond=1, 1, 1, 1, 1, 1
alarmsource=-3, 1, 1, 1, 1, 1
alarmtemperature=0, 300, 320, 345, 355, 365
alarmaction=2, 2, 2, 2, 2, 2
alarmbeep=0, 0, 0, 0, 0, 0
alarmstrings=2, 4, 6, 7, 8, 9
loadAlarmsFromProfile=false
loadAlarmsFromBackground=false
alarmsfile=C:/Users/dustin/Documents/ROASTS/SH1071_Sumatra KerinciMinang Camintoran_2021-04-28_1444.alog
alarm_popup_timout=10
alarmtablecolumnwidths=100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 278
***@***.***(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0), @variant(\0\0\0\t\0\0\0\f\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0)
[ExtraDev]
extradevices=35, 95, 34
extradevicecolor1=#ff5500, #00aa00, #0055ff
extradevicecolor2=#000000, #00aa00, #0055ff
extraname1=Inlet Temp-1, Gas, BT
extraname2=, Extra 2,
extramathexpression1=, (x-4)*(5-0)/16+0, x-20
extramathexpression2=, ,
extraLCDvisibility1=true, true, true, false, false, false, true, true, true, true
extraLCDvisibility2=false, false, false, false, false, false, true, true, true, true
extraCurveVisibility1=true, true, true, true, true, true, true, true, true, true
extraCurveVisibility2=false, false, false, true, true, true, true, true, true, true
extraDelta1=false, true, true, false, false, false, false, false, false, false
extraDelta2=false, false, false, false, false, false, false, false, false, false
extraFill1=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
extraFill2=0, 0, 0, 0, 0, 0, 0, 0, 0, 0
[ExtraComm]
extracomport=COM1, COM1, COM1
extrabaudrate=19200, 19200, 19200
extrabytesize=8, 8, 8
extraparity=E, E, E
extrastopbits=1, 1, 1
extratimeout=1, 1, 1
[CurveStyles]
BTlinestyle=-
BTdrawstyle=default
BTlinewidth=2
BTmarker=
BTmarkersize=6
ETlinestyle=-
ETdrawstyle=default
ETlinewidth=2
ETmarker=
ETmarkersize=6
BTdeltalinestyle=-
BTdeltadrawstyle=default
BTdeltalinewidth=2
BTdeltamarker=
BTdeltamarkersize=6
ETdeltalinestyle=-
ETdeltadrawstyle=default
ETdeltalinewidth=2
ETdeltamarker=
ETdeltamarkersize=6
BTbacklinestyle=-
BTbackdrawstyle=default
BTbacklinewidth=2
BTbackmarker=None
BTbackmarkersize=6
ETbacklinestyle=-
ETbackdrawstyle=default
ETbacklinewidth=2
ETbackmarker=None
ETbackmarkersize=6
XTbacklinestyle=-
XTbackdrawstyle=default
XTbacklinewidth=1
XTbackmarker=None
XTbackmarkersize=6
YTbacklinestyle=-
YTbackdrawstyle=default
YTbacklinewidth=1
YTbackmarker=None
YTbackmarkersize=6
BTBdeltalinestyle=-
BTBdeltadrawstyle=default
BTBdeltalinewidth=2
BTBdeltamarker=None
BTBdeltamarkersize=6
ETBdeltalinestyle=-
ETBdeltadrawstyle=default
ETBdeltalinewidth=2
ETBdeltamarker=None
ETBdeltamarkersize=6
extralinestyles1=-, -, -
extralinestyles2=-, -, -
extradrawstyles1=default, default, default
extradrawstyles2=default, default, default
extralinewidths1=1, 1, 1
extralinewidths2=1, 1, 1
extramarkers1=, , None
extramarkers2=None, None, None
extramarkersizes1=6, 6, 6
extramarkersizes2=6, 6, 6
devicetablecolumnwidths=414, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 158
[background]
backgrounddetails=true
backgroundevents=true
movespeed=30
DeltaETB=false
DeltaBTB=true
alignEvent=0
ETBflag=true
BTBflag=true
backgroundShowFullflag=true
clearBgbeforeprofileload=false
hideBgafterprofileload=false
[WebLCDs]
active=false
port=8080
alerts=false
[ExtraEventButtons]
buttonlistmaxlen=22
extraeventstypes=3, 3, 4, 4
extraeventsvalues=0, 0, 1, 0
extraeventsactionstrings=PIDon, PIDoff, pidmode(2), pidSV(120)
extraeventsactions=20, 20, 20, 20
extraeventsdescriptions=PID ON, PID OFF, BACKGROUND,
extraeventsvisibility=1, 1, 1, 1
extraeventslabels=PID ON, PID OFF, BACKGROUND, PID SV 120
extraeventbuttoncolor=#55ff7f, #55ff7f, #55ff7f, #808080
extraeventbuttontextcolor=#000000, #000000, #000000, white
extraeventsbuttonsflags=1, 1, 1
***@***.***(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\x10\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x3\0\0\0\x2\0\0\0\x4\0\0\0\x2\0\0\0\b\0\0\0\x2\0\0\0\b\0\0\0\x2\0\0\0\x4\0\0\0\x2\0\0\0\b\0\0\0\x2\0\0\0\b\0\0\0\t\0\0\0\x10\0\0\0\x6@\x13\x33\x33\x33\x33\x33\x33\0\0\0\x6@&\0\0\0\0\0\0\0\0\0\x6@\x1e\0\0\0\0\0\0\0\0\0\x6@\x1a\0\0\0\0\0\0\0\0\0\x6@\x17\x99\x99\x99\x99\x99\x9a\0\0\0\x6@\x16\x66\x66\x66\x66\x66\x66\0\0\0\x6@\x15\x99\x99\x99\x99\x99\x9a\0\0\0\x6@\x14\x66\x66\x66\x66\x66\x66\0\0\0\x6@\x13\x99\x99\x99\x99\x99\x9a\0\0\0\x6@\x12\x66\x66\x66\x66\x66\x66\0\0\0\x6\0\0\0\0\0\0\0\0\0\0\0\x6?\xf1\x99\x99\x99\x99\x99\x9a\0\0\0\x6\xbf\xf1\x99\x99\x99\x99\x99\x9a\0\0\0\x6\0\0\0\0\0\0\0\0\0\0\0\x6?\xf8\0\0\0\0\0\0\0\0\0\x6\xbf\xf8\0\0\0\0\0\0\0\0\0\t\0\0\0\x10\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\xe\0\0\0\x2\0\0\0\xe\0\0\0\t\0\0\0\x10\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\t\0\0\0\x10\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\n\0\0\0\x12\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\t\0\0\0\x10\0\0\0\n\0\0\0\f\0W\0\x61\0r\0m\0u\0p\0\0\0\n\0\0\0\f\0\x34\0.\0\x35\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x34\0.\0\x30\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x33\0.\0\x35\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x33\0.\0\x30\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x32\0.\0\x35\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x32\0.\0\x30\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x31\0.\0\x35\0k\0p\0\x61\0\0\0\n\0\0\0\f\0\x31\0.\0\x30\0k\0p\0\x61\0\0\0\n\0\0\0\xe\0\x30\0.\0\x35\0\x30\0k\0p\0\x61\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\x4\0+\0\x31\0\0\0\n\0\0\0\x4\0-\0\x31\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\x4\0+\0\x35\0\0\0\n\0\0\0\x4\0-\0\x35\0\0\0\t\0\0\0\x10\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\x10\0\0\0\n\0\0\0\xe\0#\0\x66\0\x66\0\x35\0\x35\0\x30\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x38\0\x30\0\x38\0\x30\0\x38\0\x30\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x30\0\x30\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x61\0\x61\0\x30\0\x30\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x61\0\x61\0\x30\0\x30\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x30\0\x30\0\x30\0\x30\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x61\0\x61\0\x66\0\x66\0\0\0\n\0\0\0\xe\0#\0\x30\0\x30\0\x61\0\x61\0\x66\0\x66\0\0\0\t\0\0\0\x10\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\n\0\0\0\n\0w\0h\0i\0t\0\x65\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\n\0\0\0\t\0\0\0\x4\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0(\0r\0\x61\0n\0g\0\x65\0(\0\x30\0,\0\x35\0)\0;\0o\0u\0t\0(\0\x30\0,\0{\0}\0)\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\x6?\xf0\0\0\0\0\0\0\0\0\0\x6?\xf0\0\0\0\0\0\0\0\0\0\x6?\xf0\0\0\0\0\0\0\0\0\0\x6?\xa9\x99\x99\x99\x99\x99\x9a\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\x4\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0#\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\x2\0\0\0\x64\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\t\0\0\0\x4\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\x2\0\0\0\0\0\0\0\n\0\0\0\0)", @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0), @variant(\0\0\0\t\0\0\0\x1a\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\t\0\0\0\0\0\0\0\n\0\0\0\0)
buttonpalettemaxlen=22, 14, 14, 14, 14, 14, 14, 14, 14, 14
buttonpalette_shortcuts=false
eventbuttontablecolumnwidths=70, 80, 100, 50, 150, 285, 80, 80, 80, 493
buttonsize=2
buttonpalette_label=
[RoRlimits]
RoRlimitFlag=true
RoRlimit=95
RoRlimitm=-95
[grid]
xgrid=60
ygrid=25
zgrid=15
gridlinestyle=0
gridthickness=1
gridalpha=0.2
[Sliders]
slidervisibilities=0, 0, 0, 0
slideractions=0, 0, 0, 0
slidercommands=, , ,
slideroffsets=0, 0, 0, 0
sliderfactors=1, 1, 1, 0.023
slidermin=0, 0, 0, 0
slidermax=100, 100, 100, 100
eventslidersflags=1, 1, 1
eventsliderBernoulli=0, 0, 0, 0
eventslidercoarse=0, 0, 0, 0
eventslidertemp=0, 0, 0, 0
eventsliderunits=, , ,
ModeTempSliders=F
[Quantifiers]
quantifieractive=0, 0, 0, 0
quantifiersource=0, 0, 0, 4
eventquantifierSV=0, 0, 0, 0
quantifiermin=0, 0, 0, 0
quantifiermax=100, 100, 100, 100
quantifiercoarse=0, 0, 0, 0
eventquantifieraction=0, 0, 0, 0
clusterEventsFlag=true
[Batch]
batchcounter=1124
batchsequence=1
batchprefix=SH
lastroastepoch=1637773374
neverUpdateBatchCounter=0
[ExtrasMoreInfo]
showmet=false
statssummary=true
statsmaxchrperline=30
showtimeguide=true
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Those settings do not match your pictures. Could you please attache the file by drag-and-drop to the Github WebBrowser window and not by a reply via email which confuses such files? |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Okay, I’ll double check them. I was trying a few different things so maybe I forgot to change them back.
Get Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Marko Luther ***@***.***>
Sent: Thursday, November 25, 2021 3:33:21 PM
To: artisan-roaster-scope/artisan ***@***.***>
Cc: DB-stoutheart ***@***.***>; Author ***@***.***>
Subject: Re: [artisan-roaster-scope/artisan] New PID Setup / Fuji PXG-4 / BT (Discussion #735)
Those settings do not match your pictures. Could you please attache the file by drag-and-drop to the Github WebBrowser window and not by a reply via email which confuses such files?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#735 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AWUVG7NBRJ32NAZWU2QR7WTUN2MRDANCNFSM5IWQPQJA>.
Triage notifications on the go with GitHub Mobile for iOS<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
okay, here is the file. I've verified these are the settings I've been using for the PID, and the buttons. The PID works fine, the only artisan command I can get to work is Thank you. |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Dustin, I looked into this now and it turns out that those PID Artisan Commands were simply not implemented for Fuji PIDs, but only for the internal Artisan Software PID. I now added the missing code. This is already available in the continuous builds which you can download here: https://github.com/artisan-roaster-scope/artisan/releases/tag/continuous Note that you could also do a COMMAND (macOS) / CONTROL click on the PID button to toggle the PID mode now. One more small remark to you button definitions: you can use a \n to enter a line break to a (long) button label to have it rendered in two lines. |
Beta Was this translation helpful? Give feedback.
-
|
Hey Marko, So I just can't seem to get this PID to behave how I'd hoped it would. I'm not sure if its a limitation of the Fuji with a gas burner, my ignorance, or something else. I appreciate your help though. As a thought, and tell me if I'm going down a rabbit hole here, could I implement the Artisan internal PID to work with my electronic gas valve? Its a 0-5v controlled proportion valve. It does work well using the Phidget OUT1002. Let me know your thoughts please. Thank you! |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
So I figured it out, amazing what beer will do for your brain... But now there is an oddity, I'm using the Artisan Command I'm running the latest continuous build, I downloaded it today.
|
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Thanks for reporting! Yes, those two pidON/pidOFF actions are inverted. Will be fixed in the next version. |
Beta Was this translation helpful? Give feedback.
0 replies
Answer selected by
MAKOMO
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Thanks for reporting! Yes, those two pidON/pidOFF actions are inverted. Will be fixed in the next version.