Artisan problemas con datos de aire

[Lurzu418]

buenas tardes, tengo la situación de que sin importar cuanto aire yo tenga en la tostadora la pantalla de artisan me muestra uno distinto y fluctuante, la tostadora es una giesen W15A y en el controlador de giesen si me muestra lo que realmente tengo, igual requiero del uso de artisan porque además trabajo con otras tostadoras, si alguien le ocurrió algo similar y puede contar como lo soluciono seria genial, lo que intente hasta ahora fue actualizar la versión de artisan, eliminar todos los archivos y volver a instalar, pero el problema persiste.

[poundy]

the first question is, have you ever had this working "correctly" on the Giesen? And can you tell us what the variance is in the readings?
This is the machine setup information page https://artisan-scope.org/machines/giesen/ and I would find it hard to explain why, if a configuration setting hasn't been changed, that a machine delivered data point is not reporting what the machine thinks it is. You may find you have got a failed or failing sensor?

[MAKOMO]

You should always use the latest Artisan version which is at the time of writing v3.1.

According to your screenshot your event quantifier for Air is tracking either the wrong curve (hidden), or that curve is reading the wrong data from the machine. If it worked before correctly, the cause of this can only be due to a modification of your quantifier or device configuration. I attach below the default quantifier configuration (menu Config >> Events, 4th tab "Quantifier") and device configuration (menu Config >> Device, 2nd tab "Extra Devices") for the Giesen W15A setup. You can as well run again the Giesen WxA setup from menu Config >> Machine to fix this.

Please report back if this fixes your issue.