The SV number selected for control does not respond on the Fuji thermostat.

[Terracotta-6]

In past versions can be set to switch normally.

[Terracotta-6]

[Terracotta-6]

I don't know the background of this development project, try to use.

[MAKOMO]

I think I catched this one. A typo was introduced in 2.8.4 causing this function to fail. I commited a fix in cf09ec4 and hope this will resolve the issue. A new continuous build should soon be available.

[Terracotta-6]

This has been fixed. Thank You！

[Terracotta-6]

[MAKOMO]

You need to have the Ramp/Soak OFF and the PID ON.

[Terracotta-6]

Wrong command ！

[Terracotta-6]

Switchover between RUN and standby
Switchover the operation mode between RUN and standby

[MAKOMO]

Well, that whole Fuji PID support was written over 10 years ago, before Artisan supported the general MODBUS protocol. Maybe all this should just be removed.

[Terracotta-6]

Fuji Temperature Control General MODBUS protocol for more flexible configuration control, Test it out of curiosity，Wasting your precious time.