Replies: 12 comments 13 replies
-
|
As long there is no full Arduino RTL8711 support this will not be possible since Tasmota needs the Arduino layer |
Beta Was this translation helpful? Give feedback.
-
|
For the foreseeable future, the only way of getting Tasmota on that device would be to replace the WRG1 module with something including a supported chip, which may need a birds nest of wiring to get pin compatibility. |
Beta Was this translation helpful? Give feedback.
-
|
Changing the WIFI module is not enough. The zigbee module is not supported. It is a different chip as in the zigbeebridge. |
Beta Was this translation helpful? Give feedback.
-
|
It looks like realtek might be helping out: https://www.amebaiot.com/en/ameba-arduino-getting-started-rtl8710/ |
Beta Was this translation helpful? Give feedback.
-
|
Good news!!!!! Arduino Core for RT wifi SoC: https://github.com/Ameba8195/Arduino Arduino Board Package: https://github.com/Ameba8195/Arduino/raw/master/release/package_realtek.com_ameba_index.json |
Beta Was this translation helpful? Give feedback.
-
|
@ascillato Now it needs "someone" to build the PlatformIO package out of it |
Beta Was this translation helpful? Give feedback.
-
|
paging @realtekycchang7 and @Ameba8195 |
Beta Was this translation helpful? Give feedback.
-
|
I stumbled on this and I would also love to see Tasmota for Tuya WRG1 Module (RTL8711AM). Any update on this? |
Beta Was this translation helpful? Give feedback.
-
|
No, and not likely to come. I'd not expect it ever. |
Beta Was this translation helpful? Give feedback.
-
|
Time is running against RTL8711. The Arduino port is still very basic. No PlatformIO port... |
Beta Was this translation helpful? Give feedback.
-
|
any good news :-) |
Beta Was this translation helpful? Give feedback.
-
|
If by that you mean Tasmota getting to run on RTL8711, no. |
Beta Was this translation helpful? Give feedback.
-
|
I have zigbee hub with WRG1. I would like to make it connect with home assistant as a zigbee coordinator . |
Beta Was this translation helpful? Give feedback.
-
|
@faizalps501 Sorry, but as explained in this thread, Tasmota is not supported in RTL8711 chips, so it is not possible to do what you are asking. |
Beta Was this translation helpful? Give feedback.
-
|
And even if you choose to replace the WRG1 module with one supported by Tasmota, the TYZS3 module is not supported by Tasmota either. Whether you can get it connected to HA in some other way is not a question relevant to Tasmota, which is the topic here. It does not cost much money to get a coordinator supported by Tasmota.... |
Beta Was this translation helpful? Give feedback.
-
|
Is there any new information/someone succeeded in changing the software from tuya to ESP home, tasmote or OpenBeken? |
Beta Was this translation helpful? Give feedback.
-
|
Tasmota is still a definitive NO |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@kirovilya: maybe this will be intresting for you https://github.com/parasite85/tuya_tygwzw1_hack. I have no time to write tasmota extensions or similar stuff to tasmota but this might help you. |
Beta Was this translation helpful? Give feedback.
-
|
@parasite85 Thank you. I'll take a look. True, I have already removed this gateway far away :) |
Beta Was this translation helpful? Give feedback.
-
|
bump, new info ? : Library : This router (TYZG1 = € 7,00) includes RTL8711AM and has nice connectors : |
Beta Was this translation helpful? Give feedback.
-
|
No news, dont expect Tasmota to run on that chip, ever. |
Beta Was this translation helpful? Give feedback.
-
|
to bad, thank you for your quick response. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
thank you, looks very promising ! |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Have you looked for this feature in other issues and in the docs?
yes
Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is.
I have not found Tasmota firmware for Tuya WRG1 Module.
Describe the solution you'd like
A clear and concise description of what you want to happen.
I would like to use a cheap zigbee gateway in a local network (without cloud and Tuya App). Same as with Sonoff Zigbee Bridge with Tasmota firmware.
Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.
Sonoff Zigbee Bridge with Tasmota firmware.
Additional context
Add any other context or screenshots about the feature request here.
Tuya wireless Hub (https://aliexpress.ru/item/4000465421911.html)
Datasheet for WRG1 module https://developer.tuya.com/en/docs/iot/device-development/module/wifi-module/wrg1-datasheet
A similar issue #8583
(Please, remember to close the issue when the problem has been addressed)
Beta Was this translation helpful? Give feedback.
All reactions