ShutterButtons

[hendrikausb]

Hi, I'm having a problem with the buttons on the roller shutter control.
If I set shutter buttons 1 and 2 with buttons 1-4, it works. Starting with shutter button 3 with buttons 5-8, I only get a "-" as feedback.
ShutterRelays 1-4 are configured and working.
What do I need to set?
Thanks

16:05:40.808 CMD: ShutterButton1 1 up 1
16:05:40.815 RSL: RESULT = {"ShutterButton1":"1 100 50 74 100 - - - 1 1|2 0 50 24 0 - - - 1 1"}
16:05:53.897 CMD: ShutterButton3 5 up 1
16:05:53.903 RSL: RESULT = {"ShutterButton3":"-"}

[hendrikausb]

Info: ESP8266, Tasmota V15.0.1, 8 Buttons and 8 relays connected via pcf8574
user_config_override.h:

#define USE_I2C
#define USE_PCF8574
#define USE_PCF8574_MODE2
#define USE_SHUTTER

I was able to test the whole thing again with an ESP32. It works with the ESP32. Doesn't it work with the ESP8266? I read that up to 4 rollershutters are possible. That means 4 shutters, 8 relays and 8 buttons for me. Am I right, or can't the ESP8266 do that?

Commands used:

SetOption80 1
shuttermode 2
interlock off
ShutterRelay1 1
ShutterRelay2 3
ShutterRelay3 5
ShutterRelay4 7
ShutterButton1 1 up 1
ShutterButton1 2 down 1
ShutterButton2 3 up 1
ShutterButton2 4 down 1
ShutterButton3 5 up 1
ShutterButton3 6 down 1
ShutterButton4 7 up 1
ShutterButton4 8 down 1
SetOption1 1

[sfromis]

Not using shutters, but to me the docs suggests only 4 buttons for ESP8266.

ShutterButton<x> <button> <p1> <p2> <p3> <ph> <m1> <m2> <m3> <mh> <mi>
<button> ESP8266:1..4,ESP32:1..32 : Button number, 0/-: disable buttons for this shutter
...

While this is not directly the syntax you used, I'd not expect that to mean that the up to 4 is only for that specific "more advanced control" syntax.

[hendrikausb]

Oh yeah, that doesn't look good for my project. But thanks for the help.