Ifan0X Remote pairing

[foltz61]

Is there a console command to initiate remote pairing on the ifan0X's? I have a few that aren't wired to a switch to initiate pairing and are wired to the same breaker so using the breaker method would cause havoc. I don't need to do this right now but want to be prepared for if it ever arises.

Thanks

Joe

For future searches:
ifan0X = ifam03 ifan04

[sfromis]

Only available commands for that device are FanSpeed and BuzzerActive. I'm not sure that it would even be possible to have Tasmota control pairing, but I've got no experience with the hardware.

[foltz61]

I was able to turn the led off using ledpower 0 in console so I still have hope it's possible or could be implemented :).

[sfromis]

Don't see the reasoning, LedPower is not specific to iFan devices, it is simply part of the common Tasmota setup, along with lots of other standard commands.

[arendst]

Pls search here regarding remote pairing. It's totally outside Tasmota control handled by specific hardware so nothing to implement here.

[foltz61]

I did do a search for remote pairing and didn't find anything. Now I know why. Thanks