Tasmota Crahes when I run "WebServer 0" or "Webserver 1" with USE_SCRIPT_WEB_DISPLAY defined

[DiegoB80]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.
When I compile the firmware by adding the lines
#ifndef USE_SCRIPT
#define USE_SCRIPT // adds about 17k flash size, variable ram size
#endif
#ifdef USE_RULES
#undef USE_RULES
#endif

#ifndef USE_SCRIPT_WEB_DISPLAY
#define USE_SCRIPT_WEB_DISPLAY
#endif

the device crashes when I try to connect to the web server and webserver is set to 0 or 1.
If I compile the firmware by adding only the lines
#ifndef USE_SCRIPT
#define USE_SCRIPT // adds about 17k flash size, variable ram size
#endif
#ifdef USE_RULES
#undef USE_RULES
#endif

it doesn't crash.

Tested compiling firmware:

• tasmota32S3
• tasmota32s3-qio_opi-all

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Display ESP32-4848S040 (ESP32-S3)
• Tasmota binary firmware version number used: 14.4.1
  • Pre-compiled
  • Self-compiled
• Flashing tools used: GitPod
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
16:33:08.260 CMD: weblog 4
16:33:08.263 RSL: RESULT = {"WebLog":4}
Guru Meditation Error: Core  0 panic'ed (InstrFetchProhibited). Exception was unhandled.

Core  0 register dump:
PC      : 0x00000001  PS      : 0x00060031  A0      : 0x8037f87e  A1      : 0x3fcab920  
A2      : 0xfa000000  A3      : 0x0000ce51  A4      : 0x00640000  A5      : 0xc97b0000  
A6      : 0x00000002  A7      : 0x3fca19a0  A8      : 0x80377a50  A9      : 0x3fcab900  
A10     : 0x00000005  A11     : 0x00000020  A12     : 0x00000000  A13     : 0x00000000  
A14     : 0x3fca1a18  A15     : 0x3fca1a1c  SAR     : 0x0000000e  EXCCAUSE: 0x00000014  
EXCVADDR: 0x00000000  LBEG    : 0x00000000  LEND    : 0x00000000  LCOUNT  : 0x00000000  


Backtrace: 0xfffffffe:0x3fcab920 0x4037f87b:0x3fcab940 0x4037f904:0x3fcab960 0x4037af69:0x3fcab980 0x4037cecf:0x3fcaba40 0x4210b305:0x3fcaba60 0x4219e107:0x3fcaba80




ELF file SHA256: 73653e056

Rebooting...

TO REPRODUCE

Steps to reproduce the behavior:
Self-compiling firmware with
#ifndef USE_SCRIPT
#define USE_SCRIPT // adds about 17k flash size, variable ram size
#endif
#ifdef USE_RULES
#undef USE_RULES
#endif

#ifndef USE_SCRIPT_WEB_DISPLAY
#define USE_SCRIPT_WEB_DISPLAY
#endif

send command "webserver 0" or "webserver 1" via serial console

try to open webserver http://tamotadevice
It crashes immediately

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

No crashes

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[Jason2866]

Without providing a small sample script to reproduce the issue, no help is possible

[DiegoB80]

It is not necessary to have any script; Tasmota crashes when I connect to the web server (and webserver is set to 0 or 1).
In my example, this is the content of the script:

[DiegoB80]

Are these details enough?
Let me know

[nikito7]

Maybe same bug:

#22833

Guru Meditation Error: Core 0 panic'ed (Stack protection fault).

Detected in task "loopTask" at 0x42015f9a
Stack pointer: 0x40827db0
Stack bounds: 0x40827e48 - 0x40829e40

[Jason2866]

For sure not, since this setting is only there for riscv MCUs