Tasmota 12.2.0 Sonoff POW

[DetlefR]

I have made an upgrade from 11.??? to 12.2.0 on a Sonoff POW. After that only for a short time after reboot values for voltage, power, current etc. are displayed.
And they are not really trustful. 8-56Volt.

Do have anyone an idea what can I do.
Hard power reset doesn't work.

[barbudor]

I suggest that you provide more details including:

• The output of command: Backlog Template; Module; GPIO 255
• If using rules, provide the output of this command: Rule0
• Provide the output of this command: Status 0:
• Set weblog to 4 and provide console logs

1. before you encounter the problem including some teleperiod messages with SENSOR/ENERGY information
2. logs once you encounter the problem

[DetlefR]

Backlog Template; Module; GPIO 255

12:32:24.372 MQT: stat/dha1p1/RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
12:32:24.580 MQT: stat/dha1p1/RESULT = {"Module":{"6":"Sonoff Pow"}}
12:32:24.786 MQT: stat/dha1p1/RESULT = {"GPIO0":{"32":"Button1"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"0":"None"},"GPIO5":{"2592":"HLWBL SEL"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"224":"Relay1"},"GPIO13":{"2656":"HLWBL CF1"},"GPIO14":{"2688":"HLW8012 CF"},"GPIO15":{"288":"Led1"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}

no rules
Status 0

12:34:25.360 MQT: stat/dha1p1/STATUS = {"Status":{"Module":6,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"dha1p1","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
12:34:25.367 MQT: stat/dha1p1/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin.gz","RestartReason":"Power On","Uptime":"0T16:57:07","StartupUTC":"2022-11-15T18:37:18","Sleep":50,"CfgHolder":4617,"BootCount":1460,"BCResetTime":"2022-01-21T15:10:43","SaveCount":2014,"SaveAddress":"F7000"}}
12:34:25.374 MQT: stat/dha1p1/STATUS2 = {"StatusFWR":{"Version":"12.2.0(tasmota)","BuildDateTime":"2022-10-17T08:39:23","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"361/699"}}
12:34:25.379 MQT: stat/dha1p1/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["b2638",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000680003C5A0A002800000000","00000080","00006000","00004000","00000000"]}}
12:34:25.393 MQT: stat/dha1p1/STATUS4 = {"StatusMEM":{"ProgramSize":626,"Free":376,"Heap":22,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"1640E0","FlashFrequency":40,"FlashMode":"DOUT","Features":["00000809","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000000"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45,62","Sensors":"1,2,3,4,5,6"}}
12:34:25.400 MQT: stat/dha1p1/STATUS5 = {"StatusNET":{"Hostname":"dha1p1","IPAddress":"192.168.0.213","Gateway":"192.168.0.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.0.185","DNSServer2":"8.8.8.8","Mac":"5C:CF:7F:E7:6E:D4","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
12:34:25.406 MQT: stat/dha1p1/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.0.185","MqttPort":1883,"MqttClientMask":"dha1p1","MqttClient":"dha1p1","MqttUser":"debian","MqttCount":5,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
12:34:25.413 MQT: stat/dha1p1/STATUS7 = {"StatusTIM":{"UTC":"2022-11-16T11:34:25","Local":"2022-11-16T12:34:25","StartDST":"2022-03-27T02:00:00","EndDST":"2022-10-30T03:00:00","Timezone":99,"Sunrise":"07:35","Sunset":"16:22"}}
12:34:25.419 MQT: stat/dha1p1/STATUS9 = {"StatusPTH":{"PowerDelta":[0,0,0],"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
12:34:25.430 MQT: stat/dha1p1/STATUS10 = {"StatusSNS":{"Time":"2022-11-16T12:34:25","ENERGY":{"TotalStartTime":"2022-11-15T00:00:00","Total":91.683,"Yesterday":0.166,"Today":0.096,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}}
12:34:25.439 MQT: stat/dha1p1/STATUS11 = {"StatusSTS":{"Time":"2022-11-16T12:34:25","Uptime":"0T16:57:07","UptimeSec":61027,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":20,"MqttCount":5,"POWER":"ON","Wifi":{"AP":1,"SSId":"b2638","BSSId":"DC:39:6F:FB:95:0F","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":5,"Downtime":"0T00:01:00"}}}

WebLog on level 4

12:41:12.516 MQT: tele/dha1p1/SENSOR = {"Time":"2022-11-16T12:41:12","ENERGY":{"TotalStartTime":"2022-11-15T00:00:00","Total":91.683,"Yesterday":0.166,"Today":0.096,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}
12:41:14.106 HTP: Main Menu
12:41:22.182 WIF: Checking connection...
12:41:22.531 WIF: Sending Gratuitous ARP
12:41:42.145 WIF: Checking connection...
...
12:46:02.176 WIF: Checking connection...
12:46:12.528 MQT: tele/dha1p1/STATE = {"Time":"2022-11-16T12:46:12","Uptime":"0T17:08:54","UptimeSec":61734,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":5,"POWER":"ON","Wifi":{"AP":1,"SSId":"b2638","BSSId":"DC:39:6F:FB:95:0F","Channel":6,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":5,"Downtime":"0T00:01:00"}}
12:46:12.540 MQT: tele/dha1p1/SENSOR = {"Time":"2022-11-16T12:46:12","ENERGY":{"TotalStartTime":"2022-11-15T00:00:00","Total":91.683,"Yesterday":0.166,"Today":0.096,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":0,"Current":0.000}}

Strange, but the values for "Total" and "Yesterday" seems correct.
After restart, the discovery message shows correct values

12:48:43.432 MQT: tasmota/discovery/5CCF7FE76ED4/sensors = {"sn":{"Time":"2022-11-16T12:48:43","ENERGY":{"TotalStartTime":"2022-11-15T00:00:00","Total":91.683,"Yesterday":0.166,"Today":0.096,"Power":16,"ApparentPower":28,"ReactivePower":23,"Factor":0.58,"Voltage":231,"Current":0.121}},"ver":1} (retained)

[arendst]

Just tried the same on POW from 11.1.0.3 to release 12.2.0 without issues.

[DetlefR]

Maybe the POW has a problem. Also a downgrade to 11.0.0 does not make it better.
As long as the Enegry "Total" and "Today" shows trustful value, I can still use it.

[arendst]

Are you sure these values are being updated? I doubt it. What you see is the tasmota stored values since the last controlled restart.

[DetlefR]

Yes. I collect the values from "Energy Total" and "Energy Power" in a database. "Power" is not usable. But "Total" seems realistic. There is no difference to days before in the "over night" period (constant consumption).

[sfromis]

"Power" is W at the instant of sampling the data, not too useful for consumption data, where "Period" is Wh in the TelePeriod interval, useful for some types of reporting.