Skip to content

Milestones

List view

  • Sales Package

    The sales package should include a USB Reference Design board, mounted on a heat sink, be equipped with adapter cables to connect it to a PC (GUI support) and a USB stick with documentation and collaterals. USB stick contents: - Presentation material about the board, test results and feature description - design file package including schematics and layout files (PDF) - Source code - GUI setup program - user guide (short)

    Overdue by 5 year(s)
    •
    Due by January 31, 2020
    •0/2 issues closed
    0% complete2 open0 closed

  • APEC Demo

    APEC 2020 takes place on March 15-19 2020 in New Orleans. For this show the USB PD reference Design should be mounted on a wedge and being connected to a PC. The Wedge should include a PASSMARK USB PD Tester to run more comprehensive tests scenarios at the booth. Additional loads like Chromebooks, power banks or phones should be available. Wedge PC: - Lenovo ThinkCentre M Tiny Serie (built into wedge) - 15" USB monitor

    Overdue by 5 year(s)
    •
    Due by February 28, 2020
    •0/2 issues closed
    0% complete2 open0 closed

  • CES Demo

    CES takes place on January 7-10 in Las Vegas. The demo provided should include two USB PD Reference Designs (one for the setup, a second one as replacement) and a tablet (e.g. Microsoft Surface Go) which can run the GUI and would also be used as load. Note: - USB PD Ref Design Boards need to be equipped with heat sink and adapter cables. - The GUI must be installed and tested on the tablet - Further loads like Chromebooks, power banks or phones are appreciated :-)

    Overdue by 5 year(s)
    •
    Due by December 16, 2019
    •0/8 issues closed
    0% complete8 open0 closed