arm64: dts: rockchip: Add Xunlong Orange Pi 3B

The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.

Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Author: Kwiboo

arch/arm64/boot/dts/rockchip/Makefile

@@ -81,6 +81,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinetab2-v0.1.dtb

arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts

@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-orangepi-3b.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 3B v1.1";
+	compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio5-supply = <&vcc_3v3>;
+};
+
+&gmac1 {
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};

arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts

@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-orangepi-3b.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 3B v2.1";
+	compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566";
+
+	vccio_phy1: regulator-1v8-vccio-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_phy1";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+};
+
+&pmu_io_domains {
+	vccio5-supply = <&vccio_phy1>;
+};
+
+&gmac1 {
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wake_host_h>;
+	};
+};
+
+&uart1 {
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};