|
| 1 | +// SPDX-License-Identifier: GPL-2.0-only |
| 2 | + |
| 3 | +/dts-v1/; |
| 4 | + |
| 5 | +#include "msm8916-pm8916.dtsi" |
| 6 | +#include "msm8916-modem-qdsp6.dtsi" |
| 7 | + |
| 8 | +#include <dt-bindings/gpio/gpio.h> |
| 9 | + |
| 10 | +/ { |
| 11 | + model = "LG K10 (K420n)"; |
| 12 | + compatible = "lg,m216", "qcom,msm8916"; |
| 13 | + chassis-type = "handset"; |
| 14 | + |
| 15 | + aliases { |
| 16 | + mmc0 = &sdhc_1; /* eMMC */ |
| 17 | + mmc1 = &sdhc_2; /* SD card */ |
| 18 | + serial0 = &blsp_uart2; |
| 19 | + }; |
| 20 | + |
| 21 | + chosen { |
| 22 | + stdout-path = "serial0"; |
| 23 | + }; |
| 24 | + |
| 25 | + battery: battery { |
| 26 | + compatible = "simple-battery"; |
| 27 | + voltage-min-design-microvolt = <3300000>; |
| 28 | + voltage-max-design-microvolt = <4350000>; |
| 29 | + energy-full-design-microwatt-hours = <8800000>; |
| 30 | + charge-full-design-microamp-hours = <2300000>; |
| 31 | + |
| 32 | + ocv-capacity-celsius = <25>; |
| 33 | + ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>, |
| 34 | + <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>, |
| 35 | + <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>, |
| 36 | + <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>, |
| 37 | + <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>, |
| 38 | + <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>, |
| 39 | + <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>, |
| 40 | + <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>; |
| 41 | + }; |
| 42 | + |
| 43 | + gpio-keys { |
| 44 | + compatible = "gpio-keys"; |
| 45 | + |
| 46 | + pinctrl-0 = <&gpio_keys_default>; |
| 47 | + pinctrl-names = "default"; |
| 48 | + |
| 49 | + label = "GPIO Buttons"; |
| 50 | + |
| 51 | + volume-up-button { |
| 52 | + label = "Volume Up"; |
| 53 | + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| 54 | + linux,code = <KEY_VOLUMEUP>; |
| 55 | + }; |
| 56 | + |
| 57 | + volume-down-button { |
| 58 | + label = "Volume Down"; |
| 59 | + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; |
| 60 | + linux,code = <KEY_VOLUMEDOWN>; |
| 61 | + }; |
| 62 | + }; |
| 63 | +}; |
| 64 | + |
| 65 | +&blsp_i2c2 { |
| 66 | + status = "okay"; |
| 67 | + |
| 68 | + accelerometer@11 { |
| 69 | + compatible = "bosch,bmc150_accel"; |
| 70 | + reg = <0x11>; |
| 71 | + |
| 72 | + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; |
| 73 | + |
| 74 | + mount-matrix = "0", "1", "0", |
| 75 | + "-1", "0", "0", |
| 76 | + "0", "0", "1"; |
| 77 | + |
| 78 | + vdd-supply = <&pm8916_l17>; |
| 79 | + vddio-supply = <&pm8916_l6>; |
| 80 | + |
| 81 | + pinctrl-0 = <&accel_int_default>; |
| 82 | + pinctrl-names = "default"; |
| 83 | + }; |
| 84 | + |
| 85 | + magnetometer@13 { |
| 86 | + compatible = "bosch,bmc150_magn"; |
| 87 | + reg = <0x13>; |
| 88 | + |
| 89 | + interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>; |
| 90 | + |
| 91 | + vdd-supply = <&pm8916_l17>; |
| 92 | + vddio-supply = <&pm8916_l6>; |
| 93 | + |
| 94 | + pinctrl-0 = <&magn_int_default>; |
| 95 | + pinctrl-names = "default"; |
| 96 | + }; |
| 97 | +}; |
| 98 | + |
| 99 | +&blsp_i2c5 { |
| 100 | + status = "okay"; |
| 101 | + |
| 102 | + touchscreen@34 { |
| 103 | + compatible = "melfas,mip4_ts"; |
| 104 | + reg = <0x34>; |
| 105 | + |
| 106 | + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; |
| 107 | + ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; |
| 108 | + |
| 109 | + pinctrl-0 = <&touchscreen_default>; |
| 110 | + pinctrl-names = "default"; |
| 111 | + }; |
| 112 | +}; |
| 113 | + |
| 114 | +&blsp_uart2 { |
| 115 | + status = "okay"; |
| 116 | +}; |
| 117 | + |
| 118 | +&mpss_mem { |
| 119 | + reg = <0x0 0x86800000 0x0 0x4a00000>; |
| 120 | +}; |
| 121 | + |
| 122 | +&pm8916_bms { |
| 123 | + monitored-battery = <&battery>; |
| 124 | + power-supplies = <&pm8916_charger>; |
| 125 | + |
| 126 | + status = "okay"; |
| 127 | +}; |
| 128 | + |
| 129 | +&pm8916_charger { |
| 130 | + qcom,fast-charge-safe-current = <700000>; |
| 131 | + qcom,fast-charge-safe-voltage = <4300000>; |
| 132 | + |
| 133 | + monitored-battery = <&battery>; |
| 134 | + status = "okay"; |
| 135 | +}; |
| 136 | + |
| 137 | +&pm8916_codec { |
| 138 | + qcom,micbias1-ext-cap; |
| 139 | + qcom,micbias-lvl = <2800>; |
| 140 | + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; |
| 141 | + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; |
| 142 | + qcom,hphl-jack-type-normally-open; |
| 143 | +}; |
| 144 | + |
| 145 | +&pm8916_rpm_regulators { |
| 146 | + pm8916_l17: l17 { |
| 147 | + regulator-min-microvolt = <2850000>; |
| 148 | + regulator-max-microvolt = <2850000>; |
| 149 | + }; |
| 150 | +}; |
| 151 | + |
| 152 | +&pm8916_vib { |
| 153 | + status = "okay"; |
| 154 | +}; |
| 155 | + |
| 156 | +&sdhc_1 { |
| 157 | + status = "okay"; |
| 158 | +}; |
| 159 | + |
| 160 | +&sdhc_2 { |
| 161 | + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| 162 | + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| 163 | + pinctrl-names = "default", "sleep"; |
| 164 | + |
| 165 | + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| 166 | + |
| 167 | + status = "okay"; |
| 168 | +}; |
| 169 | + |
| 170 | +&sound { |
| 171 | + audio-routing = |
| 172 | + "AMIC1", "MIC BIAS External1", |
| 173 | + "AMIC2", "MIC BIAS Internal2", |
| 174 | + "AMIC3", "MIC BIAS External1"; |
| 175 | +}; |
| 176 | + |
| 177 | +&usb { |
| 178 | + dr_mode = "peripheral"; |
| 179 | + extcon = <&pm8916_charger>; |
| 180 | + status = "okay"; |
| 181 | +}; |
| 182 | + |
| 183 | +&usb_hs_phy { |
| 184 | + extcon = <&pm8916_charger>; |
| 185 | +}; |
| 186 | + |
| 187 | +&venus { |
| 188 | + status = "okay"; |
| 189 | +}; |
| 190 | + |
| 191 | +&venus_mem { |
| 192 | + status = "okay"; |
| 193 | +}; |
| 194 | + |
| 195 | +&wcnss { |
| 196 | + status = "okay"; |
| 197 | +}; |
| 198 | + |
| 199 | +&wcnss_iris { |
| 200 | + compatible = "qcom,wcn3620"; |
| 201 | +}; |
| 202 | + |
| 203 | +&wcnss_mem { |
| 204 | + status = "okay"; |
| 205 | +}; |
| 206 | + |
| 207 | +&tlmm { |
| 208 | + accel_int_default: accel-int-default-state { |
| 209 | + pins = "gpio115"; |
| 210 | + function = "gpio"; |
| 211 | + drive-strength = <2>; |
| 212 | + bias-disable; |
| 213 | + }; |
| 214 | + |
| 215 | + gpio_keys_default: gpio-keys-default-state { |
| 216 | + pins = "gpio107", "gpio108"; |
| 217 | + function = "gpio"; |
| 218 | + drive-strength = <2>; |
| 219 | + bias-pull-up; |
| 220 | + }; |
| 221 | + |
| 222 | + magn_int_default: magn-int-default-state { |
| 223 | + pins = "gpio69"; |
| 224 | + function = "gpio"; |
| 225 | + drive-strength = <2>; |
| 226 | + bias-disable; |
| 227 | + }; |
| 228 | + |
| 229 | + sdc2_cd_default: sdc2-cd-default-state { |
| 230 | + pins = "gpio38"; |
| 231 | + function = "gpio"; |
| 232 | + drive-strength = <2>; |
| 233 | + bias-disable; |
| 234 | + }; |
| 235 | + |
| 236 | + touchscreen_default: touchscreen-default-state { |
| 237 | + touchscreen-pins { |
| 238 | + pins = "gpio13"; |
| 239 | + function = "gpio"; |
| 240 | + drive-strength = <2>; |
| 241 | + bias-pull-up; |
| 242 | + }; |
| 243 | + |
| 244 | + ce-pins { |
| 245 | + pins = "gpio12"; |
| 246 | + function = "gpio"; |
| 247 | + drive-strength = <2>; |
| 248 | + bias-disable; |
| 249 | + }; |
| 250 | + }; |
| 251 | +}; |
0 commit comments