hwmon: add driver for max42500-hwmon

The MAX42500 is a SoC power-system monitor with up to seven voltage
monitor inputs that has programmable OV/UV thresholds and support DVS
by I2C interface. Also, it has a programmable flexible power sequence
recorder that stores the power-up and power-down timestamps separately.

Signed-off-by: Kent Libetario <Kent.Libetario@analog.com>

Author: kentlibe

drivers/hwmon/Kconfig

@@ -1131,6 +1131,18 @@ config MAX31827
 	  This driver can also be built as a module.  If so, the module
 	  will be called max31827.
 
+config SENSORS_MAX42500
+	tristate "MAX42500 Industrial Power System Monitor"
+	depends on MFD_MAX42500
+	help
+	  If you say yes here you get support for MAX42500 SoC power-system
+	  monitor with up to seven voltage monitor. The driver also contains a
+	  programmable challenge/response watchdog, which is accessible through
+	  the I2C interface, along with a configurable RESET output.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max42500-hwmon.
+
 config SENSORS_MAX6620
 	tristate "Maxim MAX6620 fan controller"
 	depends on I2C

drivers/hwmon/Makefile

@@ -145,6 +145,7 @@ obj-$(CONFIG_SENSORS_MAX197)	+= max197.o
 obj-$(CONFIG_SENSORS_MAX31722)	+= max31722.o
 obj-$(CONFIG_SENSORS_MAX31730)	+= max31730.o
 obj-$(CONFIG_SENSORS_MAX31760)  += max31760.o
+obj-$(CONFIG_SENSORS_MAX42500)  += max42500-hwmon.o
 obj-$(CONFIG_SENSORS_MAX6620)	+= max6620.o
 obj-$(CONFIG_SENSORS_MAX6621)	+= max6621.o
 obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o